26,953 research outputs found
Cross-layer system reliability assessment framework for hardware faults
System reliability estimation during early design phases facilitates informed decisions for the integration of effective protection mechanisms against different classes of hardware faults. When not all system abstraction layers (technology, circuit, microarchitecture, software) are factored in such an estimation model, the delivered reliability reports must be excessively pessimistic and thus lead to unacceptably expensive, over-designed systems. We propose a scalable, cross-layer methodology and supporting suite of tools for accurate but fast estimations of computing systems reliability. The backbone of the methodology is a component-based Bayesian model, which effectively calculates system reliability based on the masking probabilities of individual hardware and software components considering their complex interactions. Our detailed experimental evaluation for different technologies, microarchitectures, and benchmarks demonstrates that the proposed model delivers very accurate reliability estimations (FIT rates) compared to statistically significant but slow fault injection campaigns at the microarchitecture level.Peer ReviewedPostprint (author's final draft
Intelligent systems in manufacturing: current developments and future prospects
Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS
Modeling the Structure and Complexity of Engineering Routine Design Problems
This paper proposes a model to structure routine design problems as well as a model of its design complexity. The idea is that having a proper model of the structure of such problems enables understanding its complexity, and likewise, a proper understanding of its complexity enables the development of systematic approaches to solve them. The end goal is to develop computer systems capable of taking over routine design tasks based on generic and systematic solving approaches. It is proposed to structure routine design in three main states: problem class, problem instance, and problem solution. Design complexity is related to the degree of uncertainty in knowing how to move a design problem from one state to another. Axiomatic Design Theory is used as reference for understanding complexity in routine design
Recommended from our members
Assessing Asymmetric Fault-Tolerant Software
The most popular forms of fault tolerance against design faults use "asymmetric" architectures in which a "primary" part performs the computation and a "secondary" part is in charge of detecting errors and performing some kind of error processing and recovery. In contrast, the most studied forms of software fault tolerance are "symmetric" ones, e.g. N-version programming. The latter are often controversial, the former are not. We discuss how to assess the dependability gains achieved by these methods. Substantial difficulties have been shown to exist for symmetric schemes, but we show that the same difficulties affect asymmetric schemes. Indeed, the latter present somewhat subtler problems. In both cases, to predict the dependability of the fault-tolerant system it is not enough to know the dependability of the individual components. We extend to asymmetric architectures the style of probabilistic modeling that has been useful for describing the dependability of "symmetric" architectures, to highlight factors that complicate the assessment. In the light of these models, we finally discuss fault injection approaches to estimating coverage factors. We highlight the limits of what can be predicted and some useful research directions towards clarifying and extending the range of situations in which estimates of coverage of fault tolerance mechanisms can be trusted
Diagnostics of an Aircraft Engine Pumping Unit Using a Hybrid Approach based-on Surrogate Modeling
This document introduces a hybrid approach for fault detection and identification of an aircraft engine pumping unit. It is based on the complementarity between a model-based approach accounting for uncertainties aimed at quantifying the degradation modes signatures and a data-driven approach aimed at recalibrating the healthy syndrome from measures. Because of the computational time costs of uncertainties propagation into the physics based model, a surrogate modeling technic called Kriging associated to Latin hypercube sampling is utilized. The hybrid approach is tested on a pumping unit of an aircraft engine and shows good results for computing the degradation modes signatures and performing their detection and identification
Intelligent process development of foam molding for the Thermal Protection System (TPS) of the space shuttle external tank
A knowledge based system to assist process engineers in evaluating the processability and moldability of poly-isocyanurate (PIR) formulations for the thermal protection system of the Space Shuttle external tank (ET) is discussed. The Reaction Injection Molding- Process Development Advisor (RIM-PDA) is a coupled system which takes advantage of both symbolic and numeric processing techniques. This system will aid the process engineer in identifying a startup set of mold schedules and in refining the mold schedules to remedy specific process problems diagnosed by the system
Review of research in feature-based design
Research in feature-based design is reviewed. Feature-based design is regarded as a key factor towards CAD/CAPP integration from a process planning point of view. From a design point of view, feature-based design offers possibilities for supporting the design process better than current CAD systems do. The evolution of feature definitions is briefly discussed. Features and their role in the design process and as representatives of design-objects and design-object knowledge are discussed. The main research issues related to feature-based design are outlined. These are: feature representation, features and tolerances, feature validation, multiple viewpoints towards features, features and standardization, and features and languages. An overview of some academic feature-based design systems is provided. Future research issues in feature-based design are outlined. The conclusion is that feature-based design is still in its infancy, and that more research is needed for a better support of the design process and better integration with manufacturing, although major advances have already been made
- …