Reduction of NBTI-Induced Degradation on Ring Oscillators in FPGA

Ring Oscillators are used for variety of purposes to enhance reliability on LSIs or FPGAs. This paper introduces an aging-tolerant design structure of ring oscillators that are used in FPGAs. The structure is able to reduce NBTI-induced degradation in a ring oscillator\u27s frequency by setting PMOS transistors of look-up tables in an off-state when the oscillator is not working. The evaluation of a variety of ring oscillators using Altera Cyclone IV device (60nm technology) shows that the proposed structure is capable of controlling degradation level as well as reducing more than 37% performance degradation compared to the conventional oscillators.The 20th IEEE Pacific Rim International Symposium on Dependable Computing (PRDC 2014), Nov 19-21, 2014, Singapor

Within-Die Delay Variation Measurement And Analysis For Emerging Technologies Using An Embedded Test Structure

Both random and systematic within-die process variations (PV) are growing more severe with shrinking geometries and increasing die size. Escalation in the variations in delay and power with reductions in feature size places higher demands on the accuracy of variation models. Their availability can be used to improve yield, and the corresponding profitability and product quality of the fabricated integrated circuits (ICs). Sources of within-die variations include optical source limitations, and layout-based systematic effects (pitch, line-width variability, and microscopic etch loading). Unfortunately, accurate models of within-die PVs are becoming more difficult to derive because of their increasingly sensitivity to design-context. Embedded test structures (ETS) continue to play an important role in the development of models of PVs and as a mechanism to improve correlations between hardware and models. Variations in path delays are increasing with scaling, and are increasingly affected by neighborhood\u27 interactions. In order to fully characterize within-die variations, delays must be measured in the context of actual core-logic macros. Doing so requires the use of an embedded test structure, as opposed to traditional scribe line test structures such as ring oscillators (RO). Accurate measurements of within-die variations can be used, e.g., to better tune models to actual hardware (model-to-hardware correlations). In this research project, I propose an embedded test structure called REBEL (Regional dELay BEhavior) that is designed to measure path delays in a minimally invasive fashion; and its architecture measures the path delays more accurately. Design for manufacture-ability (DFM) analysis is done on the on 90 nm ASIC chips and 28nm Zynq 7000 series FPGA boards. I present ASIC results on within-die path delay variations in a floating-point unit (FPU) fabricated in IBM\u27s 90 nm technology, with 5 pipeline stages, used as a test vehicle in chip experiments carried out at nine different temperature/voltage (TV) corners. Also experimental data has been analyzed for path delay variations in short vs long paths. FPGA results on within-die variation and die-to-die variations on Advanced Encryption System (AES) using single pipelined stage are also presented. Other analysis that have been performed on the calibrated path delays are Flip Flop propagation delays for both rising and falling edge (tpHL and tpLH), uncertainty analysis, path distribution analysis, short versus long path variations and mid-length path within-die variation. I also analyze the impact on delay when the chips are subjected to industrial-level temperature and voltage variations. From the experimental results, it has been established that the proposed REBEL provides capabilities similar to an off-chip logic analyzer, i.e., it is able to capture the temporal behavior of the signal over time, including any static and dynamic hazards that may occur on the tested path. The ASIC results further show that path delays are correlated to the launch-capture (LC) interval used to time them. Therefore, calibration as proposed in this work must be carried out in order to obtain an accurate analysis of within-die variations. Results on ASIC chips show that short paths can vary up to 35% on average, while long paths vary up to 20% at nominal temperature and voltage. A similar trend occurs for within-die variations of mid-length paths where magnitudes reduced to 20% and 5%, respectively. The magnitude of delay variations in both these analyses increase as temperature and voltage are changed to increase performance. The high level of within-die delay variations are undesirable from a design perspective, but they represent a rich source of entropy for applications that make use of \u27secrets\u27 such as authentication, hardware metering and encryption. Physical unclonable functions (PUFs) are a class of primitives that leverage within-die-variations as a means of generating random bit strings for these types of applications, including hardware security and trust. Zynq FPGAs Die-to-Die and within-die variation study shows that on average there is 5% of within-Die variation and the range of die-to-Die variation can go upto 3ns. The die-to-Die variations can be explored in much further detail to study the variations spatial dependance. Additionally, I also carried out research in the area data mining to cater for big data by focusing the work on decision tree classification (DTC) to speed-up the classification step in hardware implementation. For this purpose, I devised a pipelined architecture for the implementation of axis parallel binary decision tree classification for meeting up with the requirements of execution time and minimal resource usage in terms of area. The motivation for this work is that analyzing larger data-sets have created abundant opportunities for algorithmic and architectural developments, and data-mining innovations, thus creating a great demand for faster execution of these algorithms, leading towards improving execution time and resource utilization. Decision trees (DT) have since been implemented in software programs. Though, the software implementation of DTC is highly accurate, the execution times and the resource utilization still require improvement to meet the computational demands in the ever growing industry. On the other hand, hardware implementation of DT has not been thoroughly investigated or reported in detail. Therefore, I propose a hardware acceleration of pipelined architecture that incorporates the parallel approach in acquiring the data by having parallel engines working on different partitions of data independently. Also, each engine is processing the data in a pipelined fashion to utilize the resources more efficiently and reduce the time for processing all the data records/tuples. Experimental results show that our proposed hardware acceleration of classification algorithms has increased throughput, by reducing the number of clock cycles required to process the data and generate the results, and it requires minimal resources hence it is area efficient. This architecture also enables algorithms to scale with increasingly large and complex data sets. We developed the DTC algorithm in detail and explored techniques for adapting it to a hardware implementation successfully. This system is 3.5 times faster than the existing hardware implementation of classification.\u2

Timing speculation and adaptive reliable overclocking techniques for aggressive computer systems

Computers have changed our lives beyond our own imagination in the past several decades. The continued and progressive advancements in VLSI technology and numerous micro-architectural innovations have played a key role in the design of spectacular low-cost high performance computing systems that have become omnipresent in today\u27s technology driven world. Performance and dependability have become key concerns as these ubiquitous computing machines continue to drive our everyday life. Every application has unique demands, as they run in diverse operating environments. Dependable, aggressive and adaptive systems improve efficiency in terms of speed, reliability and energy consumption. Traditional computing systems run at a fixed clock frequency, which is determined by taking into account the worst-case timing paths, operating conditions, and process variations. Timing speculation based reliable overclocking advocates going beyond worst-case limits to achieve best performance while not avoiding, but detecting and correcting a modest number of timing errors. The success of this design methodology relies on the fact that timing critical paths are rarely exercised in a design, and typical execution happens much faster than the timing requirements dictated by worst-case design methodology. Better-than-worst-case design methodology is advocated by several recent research pursuits, which exploit dependability techniques to enhance computer system performance. In this dissertation, we address different aspects of timing speculation based adaptive reliable overclocking schemes, and evaluate their role in the design of low-cost, high performance, energy efficient and dependable systems. We visualize various control knobs in the design that can be favorably controlled to ensure different design targets. As part of this research, we extend the SPRIT3E, or Superscalar PeRformance Improvement Through Tolerating Timing Errors, framework, and characterize the extent of application dependent performance acceleration achievable in superscalar processors by scrutinizing the various parameters that impact the operation beyond worst-case limits. We study the limitations imposed by short-path constraints on our technique, and present ways to exploit them to maximize performance gains. We analyze the sensitivity of our technique\u27s adaptiveness by exploring the necessary hardware requirements for dynamic overclocking schemes. Experimental analysis based on SPEC2000 benchmarks running on a SimpleScalar Alpha processor simulator, augmented with error rate data obtained from hardware simulations of a superscalar processor, are presented. Even though reliable overclocking guarantees functional correctness, it leads to higher power consumption. As a consequence, reliable overclocking without considering on-chip temperatures will bring down the lifetime reliability of the chip. In this thesis, we analyze how reliable overclocking impacts the on-chip temperature of a microprocessor and evaluate the effects of overheating, due to such reliable dynamic frequency tuning mechanisms, on the lifetime reliability of these systems. We then evaluate the effect of performing thermal throttling, a technique that clamps the on-chip temperature below a predefined value, on system performance and reliability. Our study shows that a reliably overclocked system with dynamic thermal management achieves 25% performance improvement, while lasting for 14 years when being operated within 353K. Over the past five decades, technology scaling, as predicted by Moore\u27s law, has been the bedrock of semiconductor technology evolution. The continued downscaling of CMOS technology to deep sub-micron gate lengths has been the primary reason for its dominance in today\u27s omnipresent silicon microchips. Even as the transition to the next technology node is indispensable, the initial cost and time associated in doing so presents a non-level playing field for the competitors in the semiconductor business. As part of this thesis, we evaluate the capability of speculative reliable overclocking mechanisms to maximize performance at a given technology level. We evaluate its competitiveness when compared to technology scaling, in terms of performance, power consumption, energy and energy delay product. We present a comprehensive comparison for integer and floating point SPEC2000 benchmarks running on a simulated Alpha processor at three different technology nodes in normal and enhanced modes. Our results suggest that adopting reliable overclocking strategies will help skip a technology node altogether, or be competitive in the market, while porting to the next technology node. Reliability has become a serious concern as systems embrace nanometer technologies. In this dissertation, we propose a novel fault tolerant aggressive system that combines soft error protection and timing error tolerance. We replicate both the pipeline registers and the pipeline stage combinational logic. The replicated logic receives its inputs from the primary pipeline registers while writing its output to the replicated pipeline registers. The organization of redundancy in the proposed Conjoined Pipeline system supports overclocking, provides concurrent error detection and recovery capability for soft errors, intermittent faults and timing errors, and flags permanent silicon defects. The fast recovery process requires no checkpointing and takes three cycles. Back annotated post-layout gate-level timing simulations, using 45nm technology, of a conjoined two-stage arithmetic pipeline and a conjoined five-stage DLX pipeline processor, with forwarding logic, show that our approach, even under a severe fault injection campaign, achieves near 100% fault coverage and an average performance improvement of about 20%, when dynamically overclocked

Design and application of reconfigurable circuits and systems

Open Acces

An Ultra-Low-Energy, Variation-Tolerant FPGA Architecture Using Component-Specific Mapping

As feature sizes scale toward atomic limits, parameter variation continues to increase, leading to increased margins in both delay and energy. Parameter variation both slows down devices and causes devices to fail. For applications that require high performance, the possibility of very slow devices on critical paths forces designers to reduce clock speed in order to meet timing. For an important and emerging class of applications that target energy-minimal operation at the cost of delay, the impact of variation-induced defects at very low voltages mandates the sizing up of transistors and operation at higher voltages to maintain functionality. With post-fabrication configurability, FPGAs have the opportunity to self-measure the impact of variation, determining the speed and functionality of each individual resource. Given that information, a delay-aware router can use slow devices on non-critical paths, fast devices on critical paths, and avoid known defects. By mapping each component individually and customizing designs to a component's unique physical characteristics, we demonstrate that we can eliminate delay margins and reduce energy margins caused by variation. To quantify the potential benefit we might gain from component-specific mapping, we first measure the margins associated with parameter variation, and then focus primarily on the energy benefits of FPGA delay-aware routing over a wide range of predictive technologies (45 nm--12 nm) for the Toronto20 benchmark set. We show that relative to delay-oblivious routing, delay-aware routing without any significant optimizations can reduce minimum energy/operation by 1.72x at 22 nm. We demonstrate how to construct an FPGA architecture specifically tailored to further increase the minimum energy savings of component-specific mapping by using the following techniques: power gating, gate sizing, interconnect sparing, and LUT remapping. With all optimizations considered we show a minimum energy/operation savings of 2.66x at 22 nm, or 1.68--2.95x when considered across 45--12 nm. As there are many challenges to measuring resource delays and mapping per chip, we discuss methods that may make component-specific mapping more practical. We demonstrate that a simpler, defect-aware routing achieves 70% of the energy savings of delay-aware routing. Finally, we show that without variation tolerance, scaling from 16 nm to 12 nm results in a net increase in minimum energy/operation; component-specific mapping, however, can extend minimum energy/operation scaling to 12 nm and possibly beyond.</p

Time resolved single photon imaging in Nanometer Scale CMOS technology

Time resolved imaging is concerned with the measurement of photon arrival time. It has a wealth of emerging applications including biomedical uses such as fluorescence lifetime microscopy and positron emission tomography, as well as laser ranging and imaging in three dimensions. The impact of time resolved imaging on human life is significant: it can be used to identify cancerous cells in-vivo, how well new drugs may perform, or to guide a robot around a factory or hospital. Two essential building blocks of a time resolved imaging system are a photon detector capable of sensing single photons, and fast time resolvers that can measure the time of flight of light to picosecond resolution. In order to address these emerging applications, miniaturised, single-chip, integrated arrays of photon detectors and time resolvers must be developed with state of the art performance and low cost. The goal of this research is therefore the design, layout and verification of arrays of low noise Single Photon Avalanche Diodes (SPADs) together with high resolution Time-Digital Converters (TDCs) using an advanced silicon fabrication process. The research reported in this Thesis was carried out as part of the E.U. funded Megaframe FP6 Project. A 32x32 pixel, one million frames per second, time correlated imaging device has been designed, simulated and fabricated using a 130nm CMOS Imaging process from ST Microelectronics. The imager array has been implemented together with required support cells in order to transmit data off chip at high speed as well as providing a means of device control, test and calibration. The fabricated imaging device successfully demonstrates the research objectives. The Thesis presents details of design, simulation and characterisation results of the elements of the Megaframe device which were the author’s own work. Highlights of the results include the smallest and lowest noise SPAD devices yet published for this class of fabrication process and an imaging array capable of recording single photon arrivals every microsecond, with a minimum time resolution of fifty picoseconds and single bit linearity

Online Timing Slack Measurement and its Application in Field-Programmable Gate Arrays

Reliability, power consumption and timing performance are key concerns for today's integrated circuits. Measurement techniques capable of quantifying the timing characteristics of a circuit, while it is operating, facilitate a range of benefits. Delay variation due to environmental and operational conditions, and degradation can be monitored by tracking changes in timing performance. Using the measurements in a closed-loop to control power supply voltage or clock frequency allows for the reduction of timing safety margins, leading to improvements in power consumption or throughput performance through the exploitation of better-than worst-case operation. This thesis describes a novel online timing slack measurement method which can directly measure the timing performance of a circuit, accurately and with minimal overhead. Enhancements allow for the improvement of absolute accuracy and resolution. A compilation flow is reported that can automatically instrument arbitrary circuits on FPGAs with the measurement circuitry. On its own this measurement method is able to track the "health" of an integrated circuit, from commissioning through its lifetime, warning of impending failure or instigating pre-emptive degradation mitigation techniques. The use of the measurement method in a closed-loop dynamic voltage and frequency scaling scheme has been demonstrated, achieving significant improvements in power consumption and throughput performance.Open Acces

Cryptographic application of physical unclonable functions (PUFs)

Physical Unclonable Functions (PUFs) are circuits designed to extract physical randomness from the underlying circuit. This randomness depends on the manufacturing process. It differs for each device enabling chip-level authentication and key generation applications. This thesis has performed research work about PUF based encryption and low power PUFs. First, we present a protocol utilizing a PUF for secure data transmission. Each party has a PUFused for encryption and decryption; this is facilitated by constraining the PUF to be commutative. This framework is evaluated with a primitive permutation network - a barrel shifter. Physical randomness is derived from the delay of different shift paths. Barrel shifter (BS) PUF captures the delay of different shift paths. This delay is entangled with message bits before they are sent across an insecure channel. BS-PUF is implemented using transmission gates; their characteristics ensure same-chip physical commutativity, a necessary property of PUFs designed for encryption. Post-layout simulations of a common centroid layout 8-level barrel shifter in 0.13μm technology assess uniqueness, stability and randomness properties. BS-PUFs pass all selected NIST statistical randomness tests. Stability similar to Ring Oscillator (RO) PUFs under environment variation is shown. Logistic regression of 100,000 plaintext-ciphertext pairs (PCPs) failed to successfully modelBS-PUF behavior. Then we generalize this encryption protocol to work with PUFs other than theBSPUFs. On the other hand, we further explore some low power techniques for building PUFs. Asymmetric layout improved unit path delay variation by as much as 73.2% and uniqueness problem introduced by asymmetric layout is proved to be solvable through Multi-Block entanglement pat-tern. By adopting these 2 techniques, power and area consumption of PUF can be reduced by as much as 44.29% and 39.7%

AI/ML Algorithms and Applications in VLSI Design and Technology

An evident challenge ahead for the integrated circuit (IC) industry in the nanometer regime is the investigation and development of methods that can reduce the design complexity ensuing from growing process variations and curtail the turnaround time of chip manufacturing. Conventional methodologies employed for such tasks are largely manual; thus, time-consuming and resource-intensive. In contrast, the unique learning strategies of artificial intelligence (AI) provide numerous exciting automated approaches for handling complex and data-intensive tasks in very-large-scale integration (VLSI) design and testing. Employing AI and machine learning (ML) algorithms in VLSI design and manufacturing reduces the time and effort for understanding and processing the data within and across different abstraction levels via automated learning algorithms. It, in turn, improves the IC yield and reduces the manufacturing turnaround time. This paper thoroughly reviews the AI/ML automated approaches introduced in the past towards VLSI design and manufacturing. Moreover, we discuss the scope of AI/ML applications in the future at various abstraction levels to revolutionize the field of VLSI design, aiming for high-speed, highly intelligent, and efficient implementations