7 research outputs found
A Dual-Supply Buck Converter with Improved Light-Load Efficiency
Power consumption and device size have been placed at the primary concerns for battery-operated portable applications. Switching converters gain popularity in powering portable devices due to their high efficiency, compact sizes and high current delivery capability. However portable devices usually operate at light loads most of the time and are only required to deliver high current in very short periods, while conventional buck converter suffers from low efficiency at light load due to the switching losses that do not scale with load current. In this research, a novel technique for buck converter is proposed to reduce the switching loss by reducing the effective voltage supply at light load.
This buck converter, implemented in TSMC 0.18 micrometers CMOS technology, operates with a input voltage of 3.3V and generates an output voltage of 0.9V, delivers a load current from 1mA to 400mA, and achieves 54 percent ~ 91 percent power efficiency. It is designed to work with a constant switching frequency of 3MHz. Without sacrificing output frequency spectrum or output ripple, an efficiency improvement of up to 20 percent is obtained at light load
High Performance RF and Basdband Analog-to-Digital Interface for Multi-standard/Wideband Applications
The prevalence of wireless standards and the introduction of dynamic
standards/applications, such as software-defined radio, necessitate the next generation
wireless devices that integrate multiple standards in a single chip-set to support a variety
of services. To reduce the cost and area of such multi-standard handheld devices,
reconfigurability is desirable, and the hardware should be shared/reused as much as
possible. This research proposes several novel circuit topologies that can meet various
specifications with minimum cost, which are suited for multi-standard applications. This
doctoral study has two separate contributions: 1. The low noise amplifier (LNA) for the
RF front-end; and 2. The analog-to-digital converter (ADC).
The first part of this dissertation focuses on LNA noise reduction and linearization
techniques where two novel LNAs are designed, taped out, and measured. The first LNA,
implemented in TSMC (Taiwan Semiconductor Manufacturing Company) 0.35Cm
CMOS (Complementary metal-oxide-semiconductor) process, strategically combined an
inductor connected at the gate of the cascode transistor and the capacitive cross-coupling
to reduce the noise and nonlinearity contributions of the cascode transistors. The proposed technique reduces LNA NF by 0.35 dB at 2.2 GHz and increases its IIP3 and
voltage gain by 2.35 dBm and 2dB respectively, without a compromise on power
consumption. The second LNA, implemented in UMC (United Microelectronics
Corporation) 0.13Cm CMOS process, features a practical linearization technique for
high-frequency wideband applications using an active nonlinear resistor, which obtains a
robust linearity improvement over process and temperature variations. The proposed
linearization method is experimentally demonstrated to improve the IIP3 by 3.5 to 9 dB
over a 2.5–10 GHz frequency range. A comparison of measurement results with the prior
published state-of-art Ultra-Wideband (UWB) LNAs shows that the proposed linearized
UWB LNA achieves excellent linearity with much less power than previously published
works.
The second part of this dissertation developed a reconfigurable ADC for multistandard
receiver and video processors. Typical ADCs are power optimized for only one
operating speed, while a reconfigurable ADC can scale its power at different speeds,
enabling minimal power consumption over a broad range of sampling rates. A novel
ADC architecture is proposed for programming the sampling rate with constant biasing
current and single clock. The ADC was designed and fabricated using UMC 90nm
CMOS process and featured good power scalability and simplified system design. The
programmable speed range covers all the video formats and most of the wireless
communication standards, while achieving comparable Figure-of-Merit with customized
ADCs at each performance node. Since bias current is kept constant, the reconfigurable
ADC is more robust and reliable than the previous published works
Advances in Optical Amplifiers
Optical amplifiers play a central role in all categories of fibre communications systems and networks. By compensating for the losses exerted by the transmission medium and the components through which the signals pass, they reduce the need for expensive and slow optical-electrical-optical conversion. The photonic gain media, which are normally based on glass- or semiconductor-based waveguides, can amplify many high speed wavelength division multiplexed channels simultaneously. Recent research has also concentrated on wavelength conversion, switching, demultiplexing in the time domain and other enhanced functions. Advances in Optical Amplifiers presents up to date results on amplifier performance, along with explanations of their relevance, from leading researchers in the field. Its chapters cover amplifiers based on rare earth doped fibres and waveguides, stimulated Raman scattering, nonlinear parametric processes and semiconductor media. Wavelength conversion and other enhanced signal processing functions are also considered in depth. This book is targeted at research, development and design engineers from teams in manufacturing industry, academia and telecommunications service operators
Performance Analysis For Wireless G (IEEE 802.11 G) And Wireless N (IEEE 802.11 N) In Outdoor Environment
This paper described an analysis the different capabilities and limitation of both IEEE technologies that has been utilized for data transmission directed to mobile device. In this work, we have compared an IEEE 802.11/g/n outdoor environment to know what technology is better. the comparison consider on coverage area (mobility), through put and measuring the interferences. The work presented here is to help the researchers to select the best technology depending of their deploying case, and investigate the best variant for outdoor. The tool used is Iperf software which is to measure the data transmission performance of IEEE 802.11n and IEEE 802.11g
Performance analysis for wireless G (IEEE 802.11G) and wireless N (IEEE 802.11N) in outdoor environment
This paper described an analysis the different
capabilities and limitation of both IEEE technologies that has been utilized for data transmission directed to mobile device. In this work, we have compared an IEEE 802.11/g/n outdoor environment to know what technology is better. The comparison consider on coverage area (mobility), throughput and measuring the interferences. The work presented here is to help the researchers to select the best technology depending of their deploying case, and investigate the best variant for outdoor. The tool used is Iperf software which is to measure the data transmission performance of IEEE 802.11n and IEEE 802.11g