Design of 5.1 GHz ultra-low power and wide tuning range hybrid oscillator

The objective of the proposed work is to demonstrate the use of a hybrid approach for the design of a voltage-controlled oscillator (VCO) which can lead to higher performance. The performance is improved in terms of the tuning range, frequency of oscillation, voltage swing, and power consumption. The proposed hybrid VCO is designed using an active load common source amplifier and current starved inverter that are cascaded alternatively to achieve low power consumption. The proposed VCO achieves a measured phase noise of -74 dBc/Hz and a figure of merit (FOM) of -152.6 dBc/Hz at a 1 MHz offset when running at 5.1 GHz frequency. The hybrid current starved-current starved VCO (CS-CS VCO) consumes a power of 289 µW using a 1.8 V supply and attains a wide tuning range of 96.98%. Hybrid VCO is designed using 0.09 µm complementary metal–oxide–semiconductor (CMOS) technology. To justify the robustness, reliability, and scalability of the circuit different corner analysis is performed through 500 runs of Monte-Carlo simulation

Multi-Loop-Ring-Oscillator Design and Analysis for Sub-Micron CMOS

Ring oscillators provide a central role in timing circuits for today?s mobile devices and desktop computers. Increased integration in these devices exacerbates switching noise on the supply, necessitating improved supply resilience. Furthermore, reduced voltage headroom in submicron technologies limits the number of stacked transistors available in a delay cell. Hence, conventional single-loop oscillators offer relatively few design options to achieve desired specifications, such as supply rejection. Existing state-of-the-art supply-rejection- enhancement methods include actively regulating the supply with an LDO, employing a fully differential or current-starved delay cell, using a hi-Z voltage-to-current converter, or compensating/calibrating the delay cell. Multiloop ring oscillators (MROs) offer an additional solution because by employing a more complex ring-connection structure and associated delay cell, the designer obtains an additional degree of freedom to meet the desired specifications. Designing these more complex multiloop structures to start reliably and achieve the desired performance requires a systematic analysis procedure, which we attack on two fronts: (1) a generalized delay-cell viewpoint of the MRO structure to assist in both analysis and circuit layout, and (2) a survey of phase-noise analysis to provide a bank of methods to analyze MRO phase noise. We distill the salient phase-noise-analysis concepts/key equations previously developed to facilitate MRO and other non-conventional oscillator analysis. Furthermore, our proposed analysis framework demonstrates that all these methods boil down to obtaining three things: (1) noise modulation function (NMF), (2) noise transfer function (NTF), and (3) current-controlled-oscillator gain (KICO). As a case study, we detail the design, analysis, and measurement of a proposed multiloop ring oscillator structure that provides improved power-supply isolation (more than 20dB increase in supply rejection over a conventional-oscillator control case fabricated on the same test chip). Applying our general multi-loop-oscillator framework to this proposed MRO circuit leads both to design-oriented expressions for the oscillation frequency and supply rejection as well as to an efficient layout technique facilitating cross-coupling for improved quadrature accuracy and systematic, substantially simplified layout effort

Multi-Loop-Ring-Oscillator Design and Analysis for Sub-Micron CMOS

Ring oscillators provide a central role in timing circuits for today?s mobile devices and desktop computers. Increased integration in these devices exacerbates switching noise on the supply, necessitating improved supply resilience. Furthermore, reduced voltage headroom in submicron technologies limits the number of stacked transistors available in a delay cell. Hence, conventional single-loop oscillators offer relatively few design options to achieve desired specifications, such as supply rejection. Existing state-of-the-art supply-rejection- enhancement methods include actively regulating the supply with an LDO, employing a fully differential or current-starved delay cell, using a hi-Z voltage-to-current converter, or compensating/calibrating the delay cell. Multiloop ring oscillators (MROs) offer an additional solution because by employing a more complex ring-connection structure and associated delay cell, the designer obtains an additional degree of freedom to meet the desired specifications. Designing these more complex multiloop structures to start reliably and achieve the desired performance requires a systematic analysis procedure, which we attack on two fronts: (1) a generalized delay-cell viewpoint of the MRO structure to assist in both analysis and circuit layout, and (2) a survey of phase-noise analysis to provide a bank of methods to analyze MRO phase noise. We distill the salient phase-noise-analysis concepts/key equations previously developed to facilitate MRO and other non-conventional oscillator analysis. Furthermore, our proposed analysis framework demonstrates that all these methods boil down to obtaining three things: (1) noise modulation function (NMF), (2) noise transfer function (NTF), and (3) current-controlled-oscillator gain (KICO). As a case study, we detail the design, analysis, and measurement of a proposed multiloop ring oscillator structure that provides improved power-supply isolation (more than 20dB increase in supply rejection over a conventional-oscillator control case fabricated on the same test chip). Applying our general multi-loop-oscillator framework to this proposed MRO circuit leads both to design-oriented expressions for the oscillation frequency and supply rejection as well as to an efficient layout technique facilitating cross-coupling for improved quadrature accuracy and systematic, substantially simplified layout effort

Design and investigation of nanometric integrated circuits for all-digital frequency synthesisers

Disertacijoje nagrinėjami daugiajuosčių dažnio sintezatorių blokai, modeliai bei jų kūrimas taikant nanometrines integrinių grandynų technologijas. Iškeliama ir įrodoma hipotezė, kad taikant nanometrines technologijas visiškai skaitmeniniai dažnio sintezatoriai įgalina gauti parametrus, reikiamus daugiajuosčiams belai- džio ryšio siųstuvams-imtuvams. Darbo tikslas – sukurti visiškai skaitmeninio dažnio sintezatoriaus blokus, kuriuos naudojant galima pasiekti reikiamus sinte- zatoriaus, skirto daugiajuosčiams belaidžio ryšio siųstuvams-imtuvams, paramet- rus taikant nanometrines integrinių grandynų gamybos technologijas. Darbe išsp- ręsti tokie uždaviniai: ištirtos dažnio sintezatorių struktūros ir sukurta struktūra, tinkama įgyvendinti taikant nanometrines technologijas, sukurti ir ištirti siūlomos struktūros sintezatorių sudarančių blokų modeliai ir integriniai grandynai. Disertaciją sudaro įvadas, trys skyriai, bendrosios išvados, naudotos literatū- ros ir autoriaus publikacijų disertacijos tema sąrašai ir keturi priedai. Įvadiniame skyriuje aptariama tiriamoji problema, darbo aktualumas, aprašo- mas tyrimų objektas, formuluojamas darbo tikslas bei uždaviniai, aprašoma ty- rimų metodika, darbo mokslinis naujumas, darbo rezultatų praktinė reikšmė, gi- namieji teiginiai bei disertacijos struktūra. Pirmajame skyriuje apžvelgiamos dažnio sintezatorių rūšys, aprašomi pag- rindiniai dažnio sintezatorių parametrai ir dažniausiai naudojamos kokybės funk- cijos. Apžvelgiami dažnio sintezatorių modeliai ir jų veikimas fazės ir dažnio sri- tyse. Aprašomi visiškai skaitmeninio dažnio sintezatoriaus triukšmų šaltiniai. Skyriaus pabaigoje suformuluojami disertacijos uždaviniai. Antrajame skyriuje pasiūlyta ir taikoma nauja kokybės funkcija, leidžianti at- likti daugiajuosčių dažnio sintezatorių palyginamąją analizę. Iškeliami reikalavi- mai pagrindiniams sintezatoriaus blokams, nagrinėjami laikinio skaitmeninio kei- tiklio skiriamosios gebos didinimo būdai, sukurtas naujas laikinio skaitmeninio keitiklio modelis. Siūloma dažnio sintezatoriaus struktūra daugiajuosčiams siųs- tuvams-imtuvams. Trečiajame skyriuje pagal iškeltus reikalavimus daugiajuosčio dažnio sinte- zatoriaus blokams, taikant kompiuterinių skaičiavimų ir eksperimentinius meto- dus yra kuriami ir tiriami laikinio skaitmeninio keitiklio, skaitmeniniu būdu val- domo generatoriaus bei skaitmeninio filtro integriniai grandynai. Disertacijos tema yra atspausdinti 7 moksliniai straipsniai: 4 – mokslo žurna- luose, įtrauktuose į Clarivate Analytics Web of Science duomenų bazę, 1 – tarp- tautinių konferencijų medžiagoje, įtrauktoje į Clarivate Analytics Proceedings duomenų bazę, 2 – mokslo žurnaluose, referuojamuose kitose tarptautinėse duo- menų bazėse. Disertacijoje atliktų tyrimų rezultatai buvo paskelbti devyniose mokslinėse konferencijose Lietuvoje ir užsienyje