Bladder Volume Decoding from Afferent Neural Activity

RÉSUMÉ Lorsque les fonctions de stockage et de miction de la vessie échouent à la suite de traumatismes médullaires, ou en raison d'autres maladies neurologiques, de conditions de santé ou au vieillissement, des complications graves pour la santé du patient se produisent. Actuellement, il est possible de restaurer partiellement les fonctions de la vessie chez les patients réfractaires aux médicaments à l'aide des neurostimulateurs implantables. Pour améliorer l'efficacité et la sécurité de ces neuroprothèses, il faut un capteur de la vessie capable de détecter l’urine stockée afin de mettre en place un système en boucle fermée qui applique la stimulation électrique uniquement lorsque nécessaire. Le capteur peut également servir à aviser les patients ayant des sensations affaiblies pour les aviser en temps opportun le moment où la vessie doit être vidée ou quand un volume résiduel postmictionnel anormalement élevé reste après une miction incomplète. Dans cette thèse, on présente de nouvelles méthodes de mesure, ainsi qu’un processeur de signal numérique dédié pour décoder en temps réel le volume de la vessie à partir des enregistrements neuronaux afférents provenant des récepteurs naturels présents dans la paroi de la vessie. Nos principales contributions sont rapportées dans trois articles de journaux avec comité de lecture. On présente d'abord une revue exhaustive de la littérature comprenant des articles de journaux, des brevets et les livres les plus réputés portant sur l'anatomie, la physiologie et la physiopathologie du tractus urinaire inférieur ainsi que sur la mesure du volume ou la pression de la vessie. Cette étude nous a permis d'identifier les besoins qu'un capteur de la vessie doit satisfaire pour être utilisé dans des applications chroniques telles que celles proposées dans cette thèse. On présente aussi le résultat d’une analyse exhaustive des caractéristiques anatomiques et physiologiques de la vessie que nous avons identifiées d’avoir exercé une influence, ou même d’avoir empêché, la réalisation d'un tel capteur dans des études faites au cours des dernières années. Sur la base de cette étude et de l'évaluation systématique des méthodes de mesure pour la vessie, on a conclu que le principe de mesure le mieux adapté pour la surveillance chronique du volume de la vessie était la détection, la discrimination et le décodage de l'activité neuronale afférente découlant des récepteurs spécialisés du volume (mécanorécepteurs), au sujet desquels certains auteurs ont émis l'hypothèse de leur existence dans la muqueuse interne de la vessie. Ensuite, on présente la méthode de mesure qui permet d'estimer en temps réel le volume de la vessie à partir de l'activité afférente des mécanorécepteurs. Notre méthode a été validée avec les----------ABSTRACT Failure of the storage and voiding functions of the urinary bladder due to spinal cord injury (SCI), neural diseases, health conditions, or aging, causes serious complications in a patient's health. Currently, it is possible to partially restore bladder functions in drug-refractory patients using implantable neurostimulators. Improving the efficacy and safety of these neuroprostheses used for bladder functions restoration requires a bladder sensor (BS) capable of detecting urine volume in real-time to implement a closed-loop system that applies electrical stimulation only when required. The BS can also trigger an early warning to advise patients with impaired sensations when the bladder should be voided or when an abnormally high post-voiding residual volume remains after an incomplete voiding. In this thesis, we present new measurement methods and a dedicated digital signal processor for real-time decoding of the bladder volume through afferent neural signals arising from natural receptors present in the bladder wall. The main contributions of this thesis have been reported in three peer-reviewed journal papers. We first present a comprehensive literature review, including papers, patents and mainstay books of bladder anatomy, physiology, and pathophysiology. This review allowed us to identify the requirements (user needs) that a BS must meet for chronic applications, such as those proposed in this thesis. An exhaustive analysis of the particular anatomical and physiological characteristics of the bladder, which we realized had influenced or prevented the achievement of a BS for monitoring the bladder volume or pressure in past studies, are also presented. Based on this study and on a systematic assessment of the measurement methods published in past years, we determined the best measurement principle for chronic bladder volume monitoring: the detection, discrimination and decoding of the afferent neural activity stemming from specialized volume receptors (mechanoreceptors), on which some authors had hypothesized about its existence in the bladder inner mucosa. Next, we present methods that allows for a real-time estimation of bladder volume through the afferent activity of the bladder mechanoreceptors. Our method was validated with data acquired from anesthetized rats in acute experiments. It was possible to qualitatively estimate three states of bladder fullness in 100% of trials when the recorded afferent activity exhibited a Spearman’s correlation coefficient of 0.6 or better. Furthermore, we could quantitatively estimate the bladder volume, and also its pressure, using time-windows of properly chosen duration. The mea

Acquisition systems and decoding algorithms of peripheral neural signals for prosthetic applications

During the years, neuroprosthetic applications have obtained a great deal of attention by the international research, especially in the bioengineering field, thanks to the huge investments on several proposed projects funded by the political institutions which consider the treatment of this particular disease of fundamental importance for the global community. The aim of these projects is to find a possible solution to restore the functionalities lost by a patient subjected to an upper limb amputation trying to develop, according to physiological considerations, a communication link between the brain in which the significant signals are generated and a motor prosthesis device able to perform the desired action. Moreover, the designed system must be able to give back to the brain a sensory feedback about the surrounding world in terms of pressure or temperature acquired by tactile biosensors placed at the surface of the cybernetic hand. It in fact allows to execute involuntarymovements when for example the armcomes in contact with hot objects. The development of such a closed-loop architecture involves the need to address some critical issues which depend on the chosen approach. Several solutions have been proposed by the researches of the field, each one differing with respect to where the neural signals are acquired, either at the central nervous systemor at the peripheral one,most of themfollowing the former even that the latter is always considered by the amputees amore natural way to handle the artificial limb. This research work is based on the use of intrafascicular electrodes directly implanted in the residual peripheral nerves of the stump which represents a good compromise choice in terms of invasiveness and selectivity extracting electroneurographic (ENG) signals from which it is possible to identify the significant activity of a quite limited number of neuronal cells. In the perspective of the hardware implementation of the resulting solution which can work autonomously without any intervention by the amputee in an adaptive way according to the current characteristics of the processed signal and by using batteries as power source allowing portability, it is necessary to fulfill the tight constraints imposed by the application under consideration involved in each of the various phases which compose the considered closed-loop system. Regarding to the recording phase, the implementation must be able to remove the unwanted interferences mainly due to the electro-stimulations of themuscles placed near the electrodes featured by an order of magnitude much greater in comparison to that of the signals of interest amplifying the frequency components belonging to the significant bandwidth, and to convert them with a high resolution in order to obtain good performance at the next processing phases. To this aim, a recording module for peripheral neural signals will be presented, based on the use of a sigma-delta architecture which is composed by two main parts: an analog front-end stage for neural signal acquisition, pre-filtering and sigma-delta modulation and a digital unit for sigma-delta decimation and system configuration. Hardware/software cosimulations exploiting the Xilinx System Generator tool in Matlab Simulink environment and then transistor-level simulations confirmed that the system is capable of recording neural signals in the order of magnitude of tens of μV rejecting the huge low-frequency noise due to electromyographic interferences. The same architecture has been then exploited to implement a prototype of an 8-channel implantable electronic bi-directional interface between the peripheral nervous system and the neuro-controlled hand prosthesis. The solution includes a custom designed Integrated Circuit (0.35μm CMOS technology), responsible of the signal pre-filtering and sigma-delta modulation for each channel and the neural stimuli generation (in the opposite path) based on the directives sent by a digital control systemmapped on a low-cost Xilinx FPGA Spartan-3E 1600 development board which also involves the multi-channel sigma-delta decimation with a high-order band-pass filter as first stage in order to totally remove the unwanted interferences. In this way, the analog chip can be implanted near the electrodes thanks to its limited size avoiding to add a huge noise to theweak neural signals due to longwires connections and to cause heat-related infections, shifting the complexity to the digital part which can be hosted on a separated device in the stump of the amputeewithout using complex laboratory instrumentations. The system has been successfully tested from the electrical point of view and with in-vivo experiments exposing good results in terms of output resolution and noise rejection even in case of critical conditions. The various output channels at the Nyquist sampling frequency coming from the acquisition system must be processed in order to decode the intentions of movements of the amputee, applying the correspondent electro-mechanical stimulation in input to the cybernetic hand in order to perform the desired motor action. Different decoding approaches have been presented in the past, the majority of them were conceived starting from the relative implementation and performance evaluation of their off-line version. At the end of the research, it is necessary to develop these solutions on embedded systems performing an online processing of the peripheral neural signals. However, it is often possible only by using complex hardware platforms clocked at very high operating frequencies which are not be compliant with the low-power requirements needed to allow portability for the prosthetic device. At present, in fact, the important aspect of the real-time implementation of sophisticated signal processing algorithms on embedded systems has been often overlooked, notwithstanding the impact that limited resources of the former may have on the efficiency/effectiveness of any given algorithm. In this research work it has been addressed the optimization of a state-of-the-art algorithmfor PNS signals decoding that is a step forward for its real-time, full implementation onto a floating-point Digital Signal Processor (DSP). Beyond low-level optimizations, different solutions have been proposed at an high level in order to find the best trade-off in terms of effectiveness/efficiency. A latency model, obtained through cycle accurate profiling of the different code sections, has been drawn in order to perform a fair performance assessment. The proposed optimized real-time algorithmachieves up to 96% of correct classification on real PNS signals acquired through tf-LIFE electrodes on animals, and performs as the best off-line algorithmfor spike clustering on a synthetic cortical dataset characterized by a reasonable dissimilarity between the spikemorphologies of different neurons. When the real-time requirements are joined to the fulfilment of area and power minimization for implantable/portable applications, such as for the target neuroprosthetic devices, only custom VLSI implementations can be adopted. In this case, every part of the algorithmshould be carefully tuned. To this aim, the first preprocessing stage of the decoding algorithmbased on the use of aWavelet Denoising solution able to remove also the in-band noise sources has been deeply analysed in order to obtain an optimal hardware implementation. In particular, the usually overlooked part related to threshold estimation has been evaluated in terms of required hardware resources and functionality, exploiting the commercial Xilinx System Generator tool for the design of the architecture and the co-simulation. The analysis has revealed how the widely used Median Absolute Deviation (MAD) could lead o hardware implementations highly inefficient compared to other dispersion estimators demonstrating better scalability, relatively to the specific application. Finally, two different hardware implementations of the reference decoding algorithm have been presented highlighting pros and cons of each one of them. Firstly, a novel approach based on high-level dataflow description and automatic hardware generation is presented and evaluated on the on-line template-matching spike sorting algorithmwhich represents the most complex processing stage. It starts from the identification of the single kernels with the greater computational complexity and using their dataflow description to generate the HDL implementation of a coarse-grained reconfigurable global kernel characterized by theminimumresources in order to reduce the area and the energy dissipation for the fulfilment of the low-power requirements imposed by the application. Results in the best case have revealed a 71%of area saving compared tomore traditional solutions,without any accuracy penalty. With respect to single kernels execution, better latency performance are achievable stillminimizing the number of adopted resources. The performance in terms of latency can also be improved by tuning the implemented parallelismin the light of a defined number of channels and real-time constraints, by using more than one reconfigurable global kernel in order that they can be exploited to perform the same or different kernels at the same time in a parallel way, due to the fact that each one can execute the relative processing only in a sequential way. For this reason, a second FPGA-based prototype has been proposed based on the use of aMulti-Processor System-on-Chip (MPSoC) embedded architecture. This prototype is capable of respecting the real-time constraints posed by the application when clocked at less than 50 MHz, in comparison to 300 MHz of the previous DSP implementation. Considering that the application workload is extremely data dependent and unpredictable due to the sparsity of the neural signals, the architecture has to be dimensioned taking into account critical worst-case operating conditions in order to always ensure the correct functionality. To compensate the resulting overprovisioning of the system architecture, a software-controllable power management based on the use of clock gating techniques has been integrated in order tominimize the dynamic power consumption of the resulting solution. Summarizing, this research work can be considered a sort of proof-of-concept for the proposed techniques considering all the design issues which characterize each stage of the closed-loop system in the perspective of a portable low-power real-time hardware implementation of the neuro-controlled prosthetic device

Acquisition systems and decoding algorithms of peripheral neural signals for prosthetic applications

During the years, neuroprosthetic applications have obtained a great deal of attention by the international research, especially in the bioengineering field, thanks to the huge investments on several proposed projects funded by the political institutions which consider the treatment of this particular disease of fundamental importance for the global community. The aim of these projects is to find a possible solution to restore the functionalities lost by a patient subjected to an upper limb amputation trying to develop, according to physiological considerations, a communication link between the brain in which the significant signals are generated and a motor prosthesis device able to perform the desired action. Moreover, the designed system must be able to give back to the brain a sensory feedback about the surrounding world in terms of pressure or temperature acquired by tactile biosensors placed at the surface of the cybernetic hand. It in fact allows to execute involuntarymovements when for example the armcomes in contact with hot objects. The development of such a closed-loop architecture involves the need to address some critical issues which depend on the chosen approach. Several solutions have been proposed by the researches of the field, each one differing with respect to where the neural signals are acquired, either at the central nervous systemor at the peripheral one,most of themfollowing the former even that the latter is always considered by the amputees amore natural way to handle the artificial limb. This research work is based on the use of intrafascicular electrodes directly implanted in the residual peripheral nerves of the stump which represents a good compromise choice in terms of invasiveness and selectivity extracting electroneurographic (ENG) signals from which it is possible to identify the significant activity of a quite limited number of neuronal cells. In the perspective of the hardware implementation of the resulting solution which can work autonomously without any intervention by the amputee in an adaptive way according to the current characteristics of the processed signal and by using batteries as power source allowing portability, it is necessary to fulfill the tight constraints imposed by the application under consideration involved in each of the various phases which compose the considered closed-loop system. Regarding to the recording phase, the implementation must be able to remove the unwanted interferences mainly due to the electro-stimulations of themuscles placed near the electrodes featured by an order of magnitude much greater in comparison to that of the signals of interest amplifying the frequency components belonging to the significant bandwidth, and to convert them with a high resolution in order to obtain good performance at the next processing phases. To this aim, a recording module for peripheral neural signals will be presented, based on the use of a sigma-delta architecture which is composed by two main parts: an analog front-end stage for neural signal acquisition, pre-filtering and sigma-delta modulation and a digital unit for sigma-delta decimation and system configuration. Hardware/software cosimulations exploiting the Xilinx System Generator tool in Matlab Simulink environment and then transistor-level simulations confirmed that the system is capable of recording neural signals in the order of magnitude of tens of μV rejecting the huge low-frequency noise due to electromyographic interferences. The same architecture has been then exploited to implement a prototype of an 8-channel implantable electronic bi-directional interface between the peripheral nervous system and the neuro-controlled hand prosthesis. The solution includes a custom designed Integrated Circuit (0.35μm CMOS technology), responsible of the signal pre-filtering and sigma-delta modulation for each channel and the neural stimuli generation (in the opposite path) based on the directives sent by a digital control systemmapped on a low-cost Xilinx FPGA Spartan-3E 1600 development board which also involves the multi-channel sigma-delta decimation with a high-order band-pass filter as first stage in order to totally remove the unwanted interferences. In this way, the analog chip can be implanted near the electrodes thanks to its limited size avoiding to add a huge noise to theweak neural signals due to longwires connections and to cause heat-related infections, shifting the complexity to the digital part which can be hosted on a separated device in the stump of the amputeewithout using complex laboratory instrumentations. The system has been successfully tested from the electrical point of view and with in-vivo experiments exposing good results in terms of output resolution and noise rejection even in case of critical conditions. The various output channels at the Nyquist sampling frequency coming from the acquisition system must be processed in order to decode the intentions of movements of the amputee, applying the correspondent electro-mechanical stimulation in input to the cybernetic hand in order to perform the desired motor action. Different decoding approaches have been presented in the past, the majority of them were conceived starting from the relative implementation and performance evaluation of their off-line version. At the end of the research, it is necessary to develop these solutions on embedded systems performing an online processing of the peripheral neural signals. However, it is often possible only by using complex hardware platforms clocked at very high operating frequencies which are not be compliant with the low-power requirements needed to allow portability for the prosthetic device. At present, in fact, the important aspect of the real-time implementation of sophisticated signal processing algorithms on embedded systems has been often overlooked, notwithstanding the impact that limited resources of the former may have on the efficiency/effectiveness of any given algorithm. In this research work it has been addressed the optimization of a state-of-the-art algorithmfor PNS signals decoding that is a step forward for its real-time, full implementation onto a floating-point Digital Signal Processor (DSP). Beyond low-level optimizations, different solutions have been proposed at an high level in order to find the best trade-off in terms of effectiveness/efficiency. A latency model, obtained through cycle accurate profiling of the different code sections, has been drawn in order to perform a fair performance assessment. The proposed optimized real-time algorithmachieves up to 96% of correct classification on real PNS signals acquired through tf-LIFE electrodes on animals, and performs as the best off-line algorithmfor spike clustering on a synthetic cortical dataset characterized by a reasonable dissimilarity between the spikemorphologies of different neurons. When the real-time requirements are joined to the fulfilment of area and power minimization for implantable/portable applications, such as for the target neuroprosthetic devices, only custom VLSI implementations can be adopted. In this case, every part of the algorithmshould be carefully tuned. To this aim, the first preprocessing stage of the decoding algorithmbased on the use of aWavelet Denoising solution able to remove also the in-band noise sources has been deeply analysed in order to obtain an optimal hardware implementation. In particular, the usually overlooked part related to threshold estimation has been evaluated in terms of required hardware resources and functionality, exploiting the commercial Xilinx System Generator tool for the design of the architecture and the co-simulation. The analysis has revealed how the widely used Median Absolute Deviation (MAD) could lead o hardware implementations highly inefficient compared to other dispersion estimators demonstrating better scalability, relatively to the specific application. Finally, two different hardware implementations of the reference decoding algorithm have been presented highlighting pros and cons of each one of them. Firstly, a novel approach based on high-level dataflow description and automatic hardware generation is presented and evaluated on the on-line template-matching spike sorting algorithmwhich represents the most complex processing stage. It starts from the identification of the single kernels with the greater computational complexity and using their dataflow description to generate the HDL implementation of a coarse-grained reconfigurable global kernel characterized by theminimumresources in order to reduce the area and the energy dissipation for the fulfilment of the low-power requirements imposed by the application. Results in the best case have revealed a 71%of area saving compared tomore traditional solutions,without any accuracy penalty. With respect to single kernels execution, better latency performance are achievable stillminimizing the number of adopted resources. The performance in terms of latency can also be improved by tuning the implemented parallelismin the light of a defined number of channels and real-time constraints, by using more than one reconfigurable global kernel in order that they can be exploited to perform the same or different kernels at the same time in a parallel way, due to the fact that each one can execute the relative processing only in a sequential way. For this reason, a second FPGA-based prototype has been proposed based on the use of aMulti-Processor System-on-Chip (MPSoC) embedded architecture. This prototype is capable of respecting the real-time constraints posed by the application when clocked at less than 50 MHz, in comparison to 300 MHz of the previous DSP implementation. Considering that the application workload is extremely data dependent and unpredictable due to the sparsity of the neural signals, the architecture has to be dimensioned taking into account critical worst-case operating conditions in order to always ensure the correct functionality. To compensate the resulting overprovisioning of the system architecture, a software-controllable power management based on the use of clock gating techniques has been integrated in order tominimize the dynamic power consumption of the resulting solution. Summarizing, this research work can be considered a sort of proof-of-concept for the proposed techniques considering all the design issues which characterize each stage of the closed-loop system in the perspective of a portable low-power real-time hardware implementation of the neuro-controlled prosthetic device

Interfaces neuronales CMOS haute résolution pour l'électrophysiologie et l'optogénétique en boucle fermée

L’avenir de la recherche sur les maladies du cerveau repose sur le développement de nouvelles technologies qui permettront de comprendre comment cet organe si complexe traite, intègre et transfère l’information. Parmi celles-ci, l’optogénétique est une technologie révolutionnaire qui permet d’utiliser de la lumière afin d’activer sélectivement les neurones du cortex d’animaux transgéniques pour observer leur effet dans un vaste réseau biologique. Ce cadre expérimental repose typiquement sur l’observation de l’activité neuronale de souris transgéniques, car elles peuvent exprimer une grande variété de gènes et de maladies et qu’elles sont peu couteuses. Toutefois, la plupart des appareils de mesure ou de stimulation optogénétique disponible ne sont pas appropriés, car ils sont câblés, trop lourds et/ou trop simplistes. Malheureusement, peu de systèmes sans fil existent, et ces derniers sont grandement limités par la bande passante requise pour transmettre les données neuronales, et ils ne fournissent pas de stimulation optogénétique multicanal afin de stimuler et observer plusieurs régions du cerveau. Dans les dispositifs actuels, l’interprétation des données neuronales est effectuée ex situ, alors que la recherche bénéficierait grandement de systèmes sans fil assez intelligents pour interpréter et stimuler les neurones en boucle fermée, in situ. Le but de ce projet de recherche est de concevoir des circuits analogiques-numériques d’acquisition et de traitement des signaux neuronaux, des algorithmes d’analyse et de traitement de ces signaux et des systèmes electro-optiques miniatures et sans fil pour : i) Mener des expériences combinant l’enregistrement neuronal et l’optogénétique multicanal haute résolution avec des animaux libres de leurs mouvements. ii) Mener des expériences optogénétiques synchronisées avec l’observation, c.-à-d. en boucle fermée, chez des animaux libres de leurs mouvements. iii) Réduire la taille, le poids et la consommation énergétique des systèmes optogénétiques sans fil afin de minimiser l’impact de la recherche chez de petits animaux. Ce projet est en 3 phases, et ses principales contributions ont été rapportées dans dix conférences internationales (ISSCC, ISCAS, EMBC, etc.) et quatre articles de journaux publiés ou soumis, ainsi que dans un brevet et deux divulgations. La conception d’un système optogénétique haute résolution pose plusieurs défis importants. Notamment, puisque les signaux neuronaux ont un contenu fréquentiel élevé (_10 kHz), le nombre de canaux sous observation est limité par la bande passante des transmetteurs sans fil (2-4 canaux en général). Ainsi, la première phase du projet a visé le développement d’algorithmes de compression des signaux neuronaux et leur intégration dans un système optogénétique sans fil miniature et léger (2.8 g) haute résolution possédant 32 canaux d’acquisition et 32 canaux de stimulation optique. Le système détecte, compresse et transmet les formes d’onde des potentiels d’action (PA) produits par les neurones avec un field programmable gate array (FPGA) embarqué à faible consommation énergétique. Ce processeur implémente un algorithme de détection des PAs basé sur un seuillage adaptatif, ce qui permet de compresser les signaux en transmettant seulement les formes détectées. Chaque PA est davantage compressé par une transformée en ondelette discrète (DWT) de type Symmlet-2 suivie d’une technique de discrimination et de requantification dynamique des coefficients. Les résultats obtenus démontrent que cet algorithme est plus robuste que les méthodes existantes tout en permettant de reconstruire les signaux compressés avec une meilleure qualité (SNDR moyen de 25 dB _ 5% pour un taux de compression (CR) de 4.2). Avec la détection, des CR supérieurs à 500 sont rapportés lors de la validation in vivo. L’utilisation de composantes commerciales dans des systèmes optogénétiques sans fil augmentela taille et la consommation énergétique, en plus de ne pas être optimisée pour cette application. La seconde phase du projet a permis de concevoir un système sur puce (SoC) complementary metal oxide semiconductor (CMOS) pour faire de l’enregistrement neuronal et de optogénétique multicanal, permettant de réduire significativement la taille et la consommation énergétique comparativement aux alternatives commerciales. Ceci est une contribution importante, car c’est la première puce à être doté de ces deux fonctionnalités. Le SoC possède 10 canaux d’enregistrement et 4 canaux de stimulation optogénétique. La conception du bioamplificateur inclut une bande passante programmable (0.5 Hz - 7 kHz) et un faible bruit referré à l’entré (IRN de 3.2 μVrms), ce qui permet de cibler différents types de signaux biologiques (PA, LFP, etc.). Le convertisseur analogique numérique (ADC) de type Delta- Sigma (DS) MASH 1-1-1 est conçu pour fonctionner de faibles taux de sur-échantillonnage (OSR _50) pour réduire sa consommation et possède une résolution programmable (ENOB de 9.75 Bits avec un OSR de 25). Cet ADC exploite une nouvelle technique réduisant la taille du circuit en soustrayant la sortie de chaque branche du DS dans le domaine numérique, comparativement à la méthode analogique classique. La consommation totale d’un canal d’enregistrement est de 11.2 μW. Le SoC implémente un nouveau circuit de stimulation optique basé sur une source de courant de type cascode avec rétroaction, ce qui permet d’accommoder une large gamme de LED et de tensions de batterie comparativement aux circuits existants. Le SoC est intégré dans un système optogénétique sans fil et validé in vivo. À ce jour et en excluant ce projet, aucun système sans-fil ne fait de l’optogénétique en boucle fermée simultanément au suivi temps réel de l’activité neuronale. Une contribution importante de ce travail est d’avoir développé le premier système optogénétique multicanal qui est capable de fonctionner en boucle fermée et le premier à être validé lors d’expériences in vivo impliquant des animaux libres de leurs mouvements. Pour ce faire, la troisième phase du projet a visé la conception d’un SoC CMOS numérique, appelé neural decoder integrated circuit (ND-IC). Le ND-IC et le SoC développé lors de la phase 2 ont été intégrés dans un système optogénétique sans fil. Le ND-IC possède 3 modules : 1) le détecteur de PA adaptatif, 2) le module de compression possédant un nouvel arbre de tri pour discriminer les coefficients, et 3) le module de classement automatique des PA qui réutilise les données générées par le module de détection et de compression pour réduire sa complexité. Un lien entre un canal d’enregistrement et un canal de stimulation est établi selon l’association de chaque PA à un neurone, grâce à la classification, et selon l’activité de ce neurone dans le temps. Le ND-IC consomme 56.9 μW et occupe 0.08 mm2 par canal. Le système pèse 1.05 g, occupe un volume de 1.12 cm3, possède une autonomie de 3h, et est validé in vivo.The future of brain research lies in the development of new technologies that will help understand how this complex organ processes, integrates and transfers information. Among these, optogenetics is a recent technology that allows the use of light to selectively activate neurons in the cortex of transgenic animals to observe their effect in a large biological network. This experimental setting is typically based on observing the neuronal activity of transgenic mice, as they express a wide variety of genes and diseases, while being inexpensive. However, most available neural recording or optogenetic devices are not suitable, because they are hard-wired, too heavy and/or too simplistic. Unfortunately, few wireless systems exist, and they are greatly limited by the required bandwidth to transmit neural data, while not providing simultaneous multi-channel neural recording and optogenetic, a must for stimulating and observing several areas of the brain. In current devices, the analysis of the neuronal data is performed ex situ, while the research would greatly benefit from wireless systems that are smart enough to interpret and stimulate the neurons in closed-loop, in situ. The goal of this project is to design analog-digital circuits for acquisition and processing of neural signals, algorithms for analysis and processing of these signals and miniature electrooptical wireless systems for: i) Conducting experiments combining high-resolution multi-channel neuronal recording and high-resolution multi-channel optogenetics with freely-moving animals. ii) Conduct optogenetic experiments synchronized with the neural recording, i.e. in closed loop, with freely-moving animals. iii) Increase the resolution while reducing the size, weight and energy consumption of the wireless optogenetic systems to minimize the impact of research with small animals. This project is in 3 phases, and its main contributions have been reported in ten conferences (ISSCC, ISCAS, EMBC, etc.) and four published journal papers, or submitted, as well as in a patent and two disclosures. The design of a high resolution optogenetic system poses several challenges. In particular, since the neuronal signals have a high frequency content (10 kHz), the number of chanv nels under observation is limited by the bandwidth of the wireless transmitters (2-4 channels in general). Thus, the first phase of the project focused on the development of neural signal compression algorithms and their integration into a high-resolution miniature and lightweight wireless optogenetics system (2.8g), having 32 recording channels and 32 optical stimulation channels. This system detects, compresses and transmits the waveforms of the signals produced by the neurons, i.e. action potentials (AP), in real time, via an embedded low-power field programmable gate array (FPGA). This processor implements an AP detector algorithm based on adaptive thresholding, which allows to compress the signals by transmitting only the detected waveforms. Each AP is further compressed by a Symmlet-2 discrete wavelet transform (DWT) followed dynamic discrimination and requantification of the DWT coefficients, making it possible to achieve high compression ratios with a good reconstruction quality. Results demonstrate that this algorithm is more robust than existing approach, while allowing to reconstruct the compressed signals with better quality (average SNDR of 25 dB 5% for a compression ratio (CR) of 4.2). With detection, CRs greater than 500 are reported during the in vivo validation. The use of commercial components in wireless optogenetic systems increases the size and power consumption, while not being optimized for this application. The second phase of the project consisted in designing a complementary metal oxide semiconductor (CMOS) system-on-chip (SoC) for neural recording and multi-channel optogenetics, which significantly reduces the size and energy consumption compared to commercial alternatives. This is important contribution, since it’s the first chip to integrate both features. This SoC has 10 recording channels and 4 optogenetic stimulation channels. The bioamplifier design includes a programmable bandwidth (0.5 Hz -7 kHz) and a low input-referred noise (IRN of 3.2 μVrms), which allows targeting different biological signals (AP, LFP, etc.). The Delta-Sigma (DS) MASH 1-1-1 low-power analog-to-digital converter (ADC) is designed to work with low OSR (50), as to reduce its power consumption, and has a programmable resolution (ENOB of 9.75 bits with an OSR of 25). This ADC uses a new technique to reduce its circuit size by subtracting the output of each DS branch in the digital domain, rather than in the analog domain, as done conventionally. A recording channel, including the bioamplifier, the DS and the decimation filter, consumes 11.2 μW. Optical stimulation is performed with an on-chip LED driver using a regulated cascode current source with feedback, which accommodates a wide range of LED parameters and battery voltages. The SoC is integrated into a wireless optogenetic platform and validated in vivo.To date and excluding this project, no wireless system is making closed-loop optogenetics simultaneously to real-time monitoring of neuronal activity. An important contribution of this work is to have developed the first multi-channel optogenetic system that is able to work in closed-loop, and the first to be validated during in vivo experiments involving freely-moving animals. To do so, the third phase of the project aimed to design a digital CMOS chip, called neural decoder integrated circuit (ND-IC). The ND-IC and the SoC developed in Phase 2 are integrated within a wireless optogenetic system. The ND-IC has 3 main cores: 1) the adaptive AP detector core, 2) the compression core with a new sorting tree for discriminating the DWT coefficients, and 3 ) the AP automatic classification core that reuses the data generated by the detection and compression cores to reduce its complexity. A link between a recording channel and a stimulation channel is established according to the association of each AP with a neuron, thanks to the classification, and according to the bursting activity of this neuron. The ND-IC consumes 56.9 μW and occupies 0.08 mm2 per channel. The system weighs 1.05 g, occupies a volume of 1.12 cm3, has an autonomy of 3h, and is validated in vivo