Mimo technology in multi-radar systems for detecting stealthy air objects

The main trends in the development of air objects are analyzed (the means of air attack in the conduct of the Russian-Ukrainian war are taken as a basis). It has been established that the increase in the efficiency of radar surveillance of airspace is currently being carried out due to the quantitative increase in radar stations. In this paper, to improve the quality of detection of subtle air objects, the use of multi-position location (based on MIMO systems) is proposed. The principle of operation of a spatially coherent MIMO system is considered. The set of spaced positions of a spatially coherent multi-position system is considered as a single sparse antenna array. The possibility of increasing the resolution in planar coordinates in a MIMO system compared to the resolution of a single autonomous radar station is shown. The calculated ratio for increasing the resolution of such a system is given. Detection curves are given for the case of a spatially coherent MIMO radar system for the case when the radar stations of the system operate simultaneously in the transceiver mode. It has been established that the transition from an autonomous radar station to a MIMO system leads to a significant shift in detection characteristics to the left. It has been established that an increase in the number of radar stations in the system leads to a less significant shift in the detection characteristics to the left, which indicates a decrease in the effect. The radar systems proposed by MIMO can be built on the basis of existing radar stations of a predominantly new fleet. It is especially advantageous to use radar facilities based on phased antenna arrays for these purposes. It is advisable to use such systems in particularly dangerous areas to cover important military, government and critical infrastructure facilitie

Account of navigational hazards when the ship and the target are avoiding collision at small distances

Successful, fast and high-quality solution of the important problem of ensuring the safety of navigation and navigation leads to a significant improvement in the protection of human life at sea, as well as to a constant reduction in harm to the environment, property and other equally priority production processes in maritime transport. The navigation of modern large-capacity and high-speed ships of large sizes in cramped and limited areas is complicated by intensive navigation, with a much greater presence of navigation hazards and navigational obstacles that create the prerequisites for the occurrence of complex, non-standard and, sometimes, even emergency situations. Therefore, more than 80 % of all navigational accidents occur every year in cramped and difficult for safe navigation waters, which confirms the great complexity and danger of navigation conditions in cramped and limited waters. This article is devoted to taking into account various navigational hazards when choosing a safe maneuver for divergence between the ship and the target at small distances between them. The case of taking into account a point navigational hazard in the case of an excessive approach of a ship to a dangerous target is considered. For a situation of emergency divergence of a ship with a dangerous target, a choice of a safe evasive course is proposed, taking into account the linearly distributed navigational hazard. The aim of the article is the procedure for analytical accounting of navigational hazards when the ship and the target diverge at short distance

Methodical approach to increase the speed of decision-making in information systems

The relevance of the research lies in the need to increase the efficiency of the process of evaluating the object of evaluation while ensuring the given reliability, regardless of the hierarchical construction of the object of evaluation. The object of research is information systems. The subject of the study is the efficiency of the evaluation process. The hypothesis of the study is to increase the efficiency of the process at a given reliability. In the study, an improved methodology for increasing the efficiency of the evaluation process based on bio-inspired algorithms was proposed. In the course of the conducted research, the general provisions of the theory of artificial intelligence were used to solve the problem of analyzing the state of objects in intelligent decision support systems. The essence of improvement is to use the following procedures: − taking into account the type of uncertainty about the state of the object of evaluation; − taking into account the degree of the noise of the data on the state of the object of evaluation; − using the ant algorithm and the genetic algorithm to find the path metric when evaluating the state of the evaluation object; − deep learning of synthetic ants using evolving artificial neural networks. An example of the use of the proposed methodology is presented in the example of the assessment of a hierarchical object. The specified model showed a 15−22 % increase in data processing efficiency due to the use of additional improved procedure

Innovative technology to solve the problems of automation of mining and geological works

The object of research relates to the field of control systems for mining and transportation machinery in the development of solid mineral deposits in open-cut mining. The problem of reducing the cost of transporting 1 ton of rock mass and increasing the efficiency of these machines is solved. The article develops an expert system for the disposition of mining vehicles with a subsystem for the selection of their innovative appearance with the ability to control their operating parameters, taking into account the stochastic conditions of the developed sections of the rock. The mathematical model for the construction of the future appearance of a mining and transportation machine, based on its functional and economic evaluation, reduces to the solution of the problem of optimization of the generalized criterion of required efficiency. As an example of private indicators of their effectiveness in operation, there is an expert analysis of the evaluation of options for solutions, for example, structural-kinematic and operational parameters of these machines, etc. Innovative designs of a trough body of any size of the carrying capacity of single-rope and multi-rope steep elevators for highly profitable mining in quarries are justified unlimited values of their depth and annual productivity. In the proposed study, the values of the resistance forces to the destruction of a section of a rock mass, determined by analytical and experimental methods, are refined by finding the optimal Kalman coefficient, which increases the efficiency of the use of mining and transport machines. The proposed methods allow the development of innovative mining and transport machines with the ability to control their operating parameters taking into account the stochastic conditions of the mined rock sectio

Algorithm for early diagnosis of hepatocellular carcinoma based on gene pair similarity

The article proposes an algorithm based on intelligent methods for the early diagnosis of hepatocellular carcinoma (HCC), known as liver cancer, which is rated third cause of cancer deaths in the world. Initial diagnosis of HСC is based on laboratory studies, computer tomography and X-ray examination. However, in some cases, identifying cancerous tissues as similar non-cancerous tissues (cirrhotic tissues and normal tissues) made it necessary to perform gene analysis for the diagnosis. To predict HCC based on such numerous, diverse and heterogeneous unstructured data, preference is given to the method of artificial intelligence, i.e., machine learning. It shows the possibility of applying machine learning methods to solve the problem of accurate identification of HCC due to the compatibility of HCC tissues with identical CwoHCC non-cancerous tissues. The technology of gene pair profiling using relevant peer databases is described and the Within-Sample Relative Expression Orderings (REO) technique is used to determine the gene pair’s similarity. The article also presents a new approach based on The Within-Sample Relative Expression Orderings technique for determining the gene pair’s similarity, Incremental feature selection method for feature selection, and Support Vector Machine methods for gene pair classification. The proposed approach constitutes the methodological basis of a decision support system for the early diagnosis of HCC, and the development of such a system may be beneficial for physician decision support in the relevant fiel

Determination of the load of a composite brake pad of a wagon with wedge-dual wear

To improve the efficiency of the operation of freight rolling stock at the present stage of development of the railway industry, it is important to introduce its modern designs. At the same time, special attention should be paid to the rolling stock brakes, as the most important structural unit in terms of traffic safety. According to studies of the technical condition of the brake equipment of freight wagons, it has been established that one of the most damaged units is brake pads. As a result of operating load conditions, they experience uneven wear of the working surface – wedge-dual wear. A study of the load of a composite brake pad of a freight wagon with wedge-dual wear has been carried out. It has been established that the presence of such wear causes an additional load on its structure, including thermal. In this regard, not only the pad destruction, but also a violation of the safety of train traffic can occur. The conducted studies will contribute to the creation of recommendations for managing the temperature effect on the brake pad, as well as improving the safety of train traffic and a significant reduction in operating costs

Research on accuracy of electrical energy measurement in microgrid for mine dewatering

The object of the study is the current transformers of the electricity metering unit as part of the microgrid for mine dewatering, which includes a photovoltaic station. The need to pump mine waters is caused by the danger of flooding large areas. The introduction of a photovoltaic station to power underground pumps reduces electricity consumption from the central power grid. At the same time, it changes the operating conditions of the metering unit. There is a need to measure both the currents of the pumps in the absence of solar generation, as well as relatively small current flows in the case of commensurate capacities generated and consumed within the microgrid. A feature of electromagnetic current transformers is a decrease in the accuracy of operation if the primary current is several percent of the rated value. Based on the analysis of variance of the experimental data, it was established that there is a statistically significant connection between the secondary and primary currents of the measuring transformer at insignificant values of the primary current. Estimates of the values of the linear regression parameters that link the secondary and primary currents were determined. It was established that in the range of the transformer primary current from 0.22 % to 1.4 %, the current error reaches a value of 6.7 %. Taking into account the resulting dependence in the software of the electricity metering unit will make it possible to increase the accuracy of energy metering. Accordingly, the accuracy of financial calculations will be increase

Scanning electron microscopy and X-ray microanalysis of the condition of concrete structures of a chemical enterprise with long-term corrosion in a sulfate environment

Long-term operation of premises in aggressive environments of chemical enterprises affects the surfaces of concrete structures and leads to the formation of destructive processes. The aim of the study was to determine changes in the structure and mineral composition of concrete during long-term operation in an aggressive sulfate environment at a chemical plant for the production of titanium dioxide using the sulfate method to predict the service life of concrete structures. It has been established that during the production of TiO2 pigment by the sulfate method, the ore is decomposed by sulfate acid at high temperature, accompanied by the release of H2SO4 vapor, sulfur dioxide SO2, hydrogen sulfide H2S and elemental sulfur. Studies have established that sulfate corrosion leads to the formation of sulfur and iron oxides on the concrete surface. Studies have revealed vast areas of the surface covered with crystals of elemental sulfur, the contents of which are confirmed by the results of X-ray microanalysis. The sizes of sulfur crystals in the image range from 12 to 180 µm, the shape corresponds to the rhombic allotropic modification S8. The penetration depth of iron sulfates into the thickness of concrete is about 50 microns. The microstructure of the surface is loose, with signs of corrosion. Exposure to a high concentration of sulphate acid vapors in the workshop of the enterprise led to the destruction of calcium carbonate and the formation of gypsum crystals in concrete. The formation of gypsum crystalline hydrates provokes sulfate corrosion of concrete, resulting in the formation of pores and microcracks in concrete with the formation of calcium hydrosulfoaluminate. The studies carried out using scanning electron microscopy and X-ray microanalysis make it possible to investigate the structural changes and mineral composition of concrete under the influence of long-term sulfate corrosion

Guidelines for improving laser targeting device in military

The invention of the laser can rightfully be considered one of the most significant discoveries of the 20th century. At the very beginning of the development of this technology, they already predicted a completely universal applicability, from the very beginning the prospect of solving various problems was visible, even though some tasks were not even visible on the horizon at that time. Monochromatic laser radiation can be obtained in principle at any wavelength, both in the form of a continuous wave with a certain frequency and in the form of short pulses lasting up to fractions of a femtosecond. Focusing on the studied sample, the laser beam is subjected to nonlinear optical effects, which allows researchers to perform spectroscopy by changing the frequency of light, as well as to perform coherent analysis of processes by controlling the polarization of the laser beam. Lasers were initially limited more to scientific research and military applications. The report examines the use of laser targeting. Today there are several areas in which the introduction of laser technology in the military industry follows: air, ground and underground location, communications, navigation systems, rifles, missile defense systems. In the report let’s present some of the applications of lasers, as well as protection of the

Research on advanced technologies – design and development of cloud computing model

This article is a bibliographic review and focuses on a brief introduction to Cloud Computing as an innovative educational tool. Cloud technology is rapidly spreading in educational institutions, sometimes replacing the in-house infrastructure with cloud services. Education plays an important role in a country’s economy and today, the educational model in many countries has evolved with technology. Schools and universities in the world extensively use cloud Based Technology. Digital teaching – E-Learning and cloud-based technology are the latest models that have been widely adopted in the educational field. The identified trends in the use of cloud computing in education are clear, ranging from the design of cloud-oriented learning environments for future information technology specialists to the training of information technology specialists to enable them to obtain competencies in the use of cloud technologies. Cloud computing is a distributed computing paradigm, where, instead of acquiring information technology products, users access shared resources under various service models through a network, usually the Internet. The application of cloud computing is very broad and growing daily because of many advantages to the users, and is driven by the increasing use of various mobile devices (laptops, tablets and smartphones) and mobile Internet access being more available. The perspectives of its integration in the learning process are highlighted, as well as the factors that make its implementation difficult. Finally, some general conclusions presented on how technologies should be adopted to meet the educational needs of this new global challenge and some suggestions are made for more effective training through the Cloud Computing, as the need for further research emerge