Software routers are becoming an important alternative to proprietary and expensive network devices, because they exploit the economy of scale of the PC market and open-source software. When considering maximum performance in terms of throughput, PC-based routers suffer from limitations stemming from the single PC architecture, e.g., limited bus bandwidth, and high memory access latency. To overcome these limitations, in this paper we present a multistage architecture that combines a layer-2 load-balancer front-end and a layer-3 routing back-end, interconnected by standard Ethernet switches. Both the front-end and the back-end are implemented using standard PCs and open- source software. After describing the architecture, evaluation is performed on a lab test-bed, to show its scalability. While the proposed solution allows to increase performance of PC- based routers, it also allows to distribute packet manipulation functionalities, and to automatically recover from component failures
