THE INFLUENCE OF PRECIPITATION PARAMETERS OF VACUUM- ARC NANOCRYSTALLINE COATING TI-MO-N ON NANOHARDNESS AND WEAR RESISTANCE OF PISTON RINGS

It has been investigated the influence of multi-layered vacuum-arc nanostructure coating Ti - Mo - N on wear resistance of piston rings. The influence of vacuum-arc coating parameters on nanohardness has been set

Valve seat pores sealed with thermosetting monomer

Hard anodic coating provides a smooth wear resistant value seating surface on a cast aluminum alloy valve body. Vacuum impregnation with a thermosetting monomer, diallyl phthalate, seals the pores on the coating to prevent galvanic corrosion

Study of space environment effects on thermal control coatings - Dependence of thermal control coating degradation upon electron energy Final report

Hemispherical spectral reflectance in vacuum for thermal coating degradation using electron energ

Application of yttrium coatings on chromium- base alloys by metalliding Final report

Electroplating and vacuum evaporation of yttrium oxide-chromium oxide coating of chromium alloys for nitrogen embrittlement protectio

Low solar absorptance and emittance surfaces utilizing vacuum deposited techniques Final report, 1 Jun. 1967 - 25 Mar. 1968

Optical properties and stability of vacuum deposited silver and dielectric film coating

Effect of environment on thermal control coatings Final report

Thermal control coating degradation under vacuum and ultraviolet radiation by chemical change of photoproduced holes and electron

Multilayer infrared beamsplitter film system

Multilayer infrared beamsplitter film system on a potassium bromide crystal substrate is operational over a wavelength range of 2.5 to 25 microns with nearly equal broadband reflectance and transmittance. It is useful in optical coating, vacuum deposition, radiometry, interferometry, and spectrometry

A new solution for mirror coating in γ\gamma-ray Cherenkov Astronomy

In the $\gamma$-ray Cherenkov Astronomy framework mirror coating plays a crucial role in defining the light response of the telescope. We carried out a study for new mirror coating solutions with both a numerical simulation software and a vacuum chamber for small sample production. In this article, we present a new mirror coating solution consisting of a 28-layer interferometric SiO$_{2}$-TiO$_{2}$-HfO$_{2}$ design deposited on a glass substrate, whose average reflectance is above $90\%$ for normally incident light in the wavelength range between 300 and 550 nm.Comment: 6 pages, 5 figures. Article submitted to Experimental Astronomy, the final publication is available at link.springer.co

Strongly nonlinear wave dynamics in a chain of polymer coated beads

Strongly nonlinear phononic crystals were assembled from a chain of Parylene-C coated steel spheres in a polytetrafluoroethylene holder. This system exhibits strongly nonlinear properties and extends the range of materials supporting sonic-vacuum-type behavior. The combination of a high density core and a soft (low elastic modulus) coating ensures a relatively low velocity of wave propagation. The bead contact interaction caused by the deformation of the Parylene coating can be described by classical nonlinear elastic Hertz theory with an effective value of the elastic modulus equal to 15 GPa for the contact interaction. Strongly nonlinear solitary waves excited by impacts were investigated experimentally and compared to chains composed of uniform steel beads. Fracture of the polymer coating was detected under relatively large pulse amplitude

Anti-corrosion ceramic coatings on the surface of Nd-Fe-B repelling magnets

The results of vacuum-arc deposition of thin ZrO₂coatings to protect the surface of Nd-Fe-B permanent magnets used as repelling devices in orthodontics are presented. The structure, phase composition and mechanical properties of zirconium dioxide films have been investigated by means of SEM, XRD, EDX, XRF and nanoindentation method. It was revealed the formation of polycrystalline ZrO₂ films of monoclinic modification with average grain size 25 nm. The influence of the ZrO₂ coating in terms of its barrier properties for corrosion in quasi-physiological 0.9 NaCl solution has been studied. Electrochemical measurements indicated good barrier properties of the coating on specimens in the physiological solution environment