Erbium-doped and Raman microlasers on a silicon chip fabricated by the sol–gel process

We report high-Q sol–gel microresonators on silicon chips, fabricated directly from a sol–gel layer deposited onto a silicon substrate. Quality factors as high as 2.5×10^7 at 1561 nm were obtained in toroidal microcavities formed of silica sol–gel, which allowed Raman lasing at absorbed pump powers below 1 mW. Additionally, Er3+-doped microlasers were fabricated from Er3+-doped sol–gel layers with control of the laser dynamics possible by varying the erbium concentration of the starting sol–gel material. Continuous lasing with a threshold of 660 nW for erbium-doped microlaser was also obtained

Mechanical compatibility of sol–gel annealing with titanium for orthopaedic prostheses

Sol–gel processing is an attractive method for large-scale surface coating due to its facile and inexpensive preparation, even with the inclusion of precision nanotopographies. These are desirable traits for metal orthopaedic prostheses where ceramic coatings are known to be osteoinductive and the effects may be amplified through nanotexturing. However there are a few concerns associated with the application of sol–gel technology to orthopaedics. Primarily, the annealing stage required to transform the sol–gel into a ceramic may compromise the physical integrity of the underlying metal. Secondly, loose particles on medical implants can be carcinogenic and cause inflammation so the coating needs to be strongly bonded to the implant. These concerns are addressed in this paper. Titanium, the dominant material for orthopaedics at present, is examined before and after sol–gel processing for changes in hardness and flexural modulus. Wear resistance, bending and pull tests are also performed to evaluate the ceramic coating. The findings suggest that sol–gel coatings will be compatible with titanium implants for an optimum temperature of 500 °C

Internal Motility in Stiffening Actin-Myosin Networks

We present a study on filamentous actin solutions containing heavy meromyosin subfragments of myosin II motor molecules. We focus on the viscoelastic phase behavior and internal dynamics of such networks during ATP depletion. Upon simultaneously using micro-rheology and fluorescence microscopy as complementary experimental tools, we find a sol-gel transition accompanied by a sudden onset of directed filament motion. We interpret the sol-gel transition in terms of myosin II enzymology, and suggest a "zipping" mechanism to explain the filament motion in the vicinity of the sol-gel transition.Comment: 4 pages, 3 figure

Improvement of barrier properties of a hybrid sol-gel coating by incorporation of synthetic talc-like phyllosilicates for corrosion protection of a carbon steel

Sol–gel coatings for corrosion protection of metals are a good alternative to toxic chromate treatments. The present work focussed on the incorporation of inorganic fillers in a sol–gel coating to improve the barrier properties of the film. Talc-like phyllosilicates obtained by hydrothermal synthesis at 160°C, 260°C and 350°C, called T160, T260 and T350 respectively, were selected as inorganic fillers. The synthetic materials showed talc lamellar structure but, in contrast with natural talc, their smaller size (about 300 nm) and their hydrophilic character allowed easier dispersion of the particles in the sol–gel matrix. Electrochemical impedance measurements performed on the sol–gel coatings deposited on XC35 carbon steel showed that the incorporation of T260 and T350 at a concentration of 20 g L− 1 strongly enhanced the barrier properties of the coating by comparison with the filler-free system. As a consequence, the corrosion protection of the metal substrate was improved

A Structural Comparison of Ordered and Non-Ordered Ion Doped Silicate Bioactive Glasses

One of the key benefits of sol-gel-derived glasses is the presence of a mesoporous structure and the resulting increase in surface area. This enhancement in textural properties has a significant e ect on the physicochemical properties of the materials. In this context the aim of this study was to investigate how sol-gel synthesis parameters can influence the textural and structural properties of mesoporous silicate glasses. We report the synthesis and characterization of metal ion doped sol-gel derived glasses with di erent dopants in the presence or absence of a surfactant (Pluronic P123) used as structure-directing templating agent. Characterization was done by several methods. Using a structure directing agent led to larger surface areas and highly ordered mesoporous structures. The chemical structure of the non-ordered glasses was modified to a larger extent than the one of the ordered glasses due to increased incorporation of dopant ions into the glass network. The results will help to further understand how the properties of sol-gel glasses can be controlled by incorporation of metal dopants, in conjunction with control over the textural properties, and will be important to optimize the properties of sol-gel glasses for specific applications, e.g., drug delivery, bone regeneration, wound healing, and antibacterial materials.European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 643050, project “HyMedPoly

Development of new processes to protect zinc against corrosion, suitable for on-site use

Protection against corrosion of metals is well known as an important issue in numerous fields. In all cases, the improvement of durability of these metals has to be connected to the development of environmentally friendly processes. Sol–gel protective coatings have shown excellent chemical stability and enhanced corrosion resistance for zinc substrates. Further, the sol–gel method, used as technique of surface protection, showed the potential for the replacement of toxic pre-treatments. This paper highlights the recent developments and applications of silane based sol–gel coatings on zinc substrates. Then, the challenges for industrial transfer of the developed process are also discussed because this process presents a disadvantage for on-site use, which is the too time-consuming thermal treatment. So, the goal of this study was to determine the convenient experimental conditions to reduce the duration of heat treatment of the hybrid sol–gel layer, compatible with the severe industrial requirements, without reducing the protection against corrosion. To reach this objective, a correlation between the results of chemical analyses and the protection against corrosion efficiency was established

Modification of hemp shiv properties using water-repellent sol–gel coatings

For the first time, the hydrophilicity of hemp shiv was modified without the compromise of its hygroscopic properties. This research focused on the use of sol–gel method in preparation of coatings on the natural plant material, hemp shiv, that has growing potential in the construction industry as a thermal insulator. The sol–gel coatings were produced by cohydrolysis and polycondensation of tetraethyl orthosilicate (TEOS) using an acidic catalyst. Methyltriethoxysilane (MTES) was added as the hydrophobic precursor to provide water resistance to the bio-based material. Scanning electron microscopy (SEM) and focused ion beam (FIB) have been used to determine the morphological changes on the surface as well as within the hemp shiv. It was found that the sol–gel coatings caused a reduction in water uptake but did not strongly influence the moisture sorption behaviour of hemp shiv. Fourier transformed infrared (FTIR) spectroscopy shows that the coating layer on hemp shiv acts a shield, thereby lowering peak intensity in the wavelength range 1200–1800 cm−1. The sol–gel coating affected pore size distribution and cumulative pore volume of the shiv resulting in tailored porosity. The overall porosity of shiv decreased with a refinement in diameter of the larger pores. Thermal analysis was performed using TGA and stability of coated and uncoated hemp shiv have been evaluated. Hemp shiv modified with sol–gel coating can potentially develop sustainable heat insulating composites with better hygrothermal properties

Novel sol–gel preparation of (PO)–(CaO)–(NaO)–(TiO) bioresorbable glasses (X = 0.05, 0.1, and 0.15)

Quaternary phosphate-based glasses in the PO–CaO–NaO–TiO system with a fixed PO and CaO content of 40 and 25 mol% respectively have been successfully synthesised via sol–gel method and bulk, transparent samples were obtained. The structure, elemental proportion, and thermal properties of stabilised sol–gel glasses have been characterised using X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), P nuclear magnetic resonance (P NMR), titanium K-edge X-ray absorption near-edge structure (XANES), fourier transform infrared (FTIR) spectroscopy, and differential thermal analysis (DTA). The XRD results confirmed the amorphous nature for all stabilized sol–gel derived glasses. The EDX result shows the relatively low loss of phosphorus during the sol–gel process and Ti K-edge XANES confirmed titanium in the glass structure is in mainly six-fold coordination environment. The P NMR and FTIR results revealed that the glass structure consist of mainly Q and Q phosphate units and the Ti cation was acting as a cross-linking between phosphate units. In addition DTA results confirmed a decrease in the glass transition and crystallisation temperature with increasing NaO content. Ion release studies also demonstrated a decrease in degradation rates with increasing TiO content therefore supporting the use of these glasses for biomedical applications that require a degree of control over glass degradation. These sol–gel glasses also offer the potential to incorporate proactive molecules for drug delivery application due to the low synthesis temperature employed

SERS Detection of Graphene Oxide in Acid Catalyzed Sol-Gels

Silica sol-gel and aerogel substrates were synthesized using a modified acid catalyzed hydrolysis of tetramethyl orthosilicate method that incorporated graphene oxide and silver nanoparticles into the matrix. The effectiveness of loading of graphene oxide was monitored by UV-vis and surface enhanced Raman spectroscopy (SERS). Characterization data suggests that graphene oxide is detectable through SERS while integrated into a sol-gel and that size of silver nanoparticles has an impact on the SERS spectrum of graphene oxide