Bimetallic Pt(II)-bipyridyl-diacetylide/Ln(III) tris-diketonate adducts based on a combination of coordinate bonding and hydrogen bonding between the metal fragments: syntheses, structures and photophysical properties

The luminescent Pt(II) complex [Pt(4,4'-Bu-t(2)-bipy){CC-(5-pyrimidinyl)}(2)] (1) was prepared by coupling of [Pt(4,4'-Bu-t(2)-bipy)Cl-2] with 5-ethynyl-pyrimidine, and contains two pyrimidinyl units pendant from a Pt(H) bipyridyl diacetylide core; it shows luminescence at 520 nm which is typical of Pt(II) luminophores of this type. Reaction with [Ln(hfac)(3)(H2O)(2)] (hfac = anion of hexafluoroacetylacetone) affords as crystalline solids the compounds [1 center dot {Ln(hfac)(3)(H2O)}{Ln(hfac)(3)(H2O)(2)}] (Ln = Nd, Gd, Er, Yb), in which the {Ln(hfac)(3)(H2O)} unit is coordinated to one pyrimidine ring via an N atom, whereas the {Ln(hfac)(3)(H2O)(2)} unit is associated with two N atoms, one from each pyrimidine ring of 1, via N center dot center dot center dot HOH hydrogen-bonding interactions involving the coordinated water ligands on the lanthanide centre. Solution spectroscopic studies show that the luminescence of 1 is partly quenched on addition of [Ln(hfac)(3)(H2O)(2)] (Ln = Er, Nd) by formation of Pt(II)/Ln(III) adducts in which Pt(II)-> Ln(III) photoinduced energy-transfer occurs to the low-lying f-f levels of the Ln(Ill) centre. Significant quenching occurs with both Er(Ill) and Nd(III) because both have several f-f states which match well the (MLCT)-M-3 emission energy of 1. Time-resolved luminescence studies show that Pt(II)-Er(III) energy-transfer (7.0 x 10(7) M-1) is around three times faster than Pt(II)-> Nd(III) energy-transfer (approximate to 2 x 10(7) M-1) over the same distance because the luminescence spectrum of l overlaps better with the absorption spectrum of Er(111) than with Nd(III). In contrast Yb(111) causes no significant quenching of 1 because it has only a single f-f excited level which is a poor energy match for the Pt(II)-based excited state

Bis (2-pyrimidinyl) disulfide dihydrate: a redetermination

The crystal structure of bis(2-pyrimidinyl) disul®de dihydrate, C8H6N4S22H2O, has been redetermined using CCD diffractometer data. This has allowed for a more precise location of the water H atoms and shows the water molecules forming unusual spiral hydrogen-bonded aqua columns, as well as giving inter-column crosslinks through the pyrimidine N-atom acceptors of the disul®de molecules. The structural chemistry of aromatic disul®des has also been reviewed

Synthesis and Crystal Structure of 1-(3-fluorophenyl)-3-(3,4,5-trimethoxybenzoyl)thiourea

The title thiourea was synthesized by reaction of 3,4,5-trimethoxybenzoyl isothiocyante with 3-fluoroaniline. The 3,4,5-trimethoxybenzoyl isothiocyante was produced in situ by reaction of 3,4,5-trimethoxybenzoyl chloride with ammonium thiocyanate in dry acetonitrile. The structure was confirmed by the spectroscopic, elemental analysis and single crystal X-ray diffraction data. It crystallizes in the monoclinic space group P21/c with unit cell dimensions a = 13.0966(9), b = 16.6460(13), c = 7.8448(5), β = 106.721(5)°, V 1637.9(2) ų, Z = 4

High-throughput screening with the Eimeria tenella CDC2-related kinase2/cyclin complex EtCRK2/EtCYC3a

The poultry disease coccidiosis, caused by infection with Eimeria spp. apicomplexan parasites, is responsible for enormous economic losses to the global poultry industry. The rapid increase of resistance to therapeutic agents, as well as the expense of vaccination with live attenuated vaccines, requires the development of new effective treatments for coccidiosis. Because of their key regulatory function in the eukaryotic cell cycle, cyclin-dependent kinases (CDKs) are prominent drug targets. The Eimeria tenella CDC2-related kinase 2 (EtCRK2) is a validated drug target that can be activated in vitro by the CDK activator XlRINGO (Xenopus laevis rapid inducer of G2/M progression in oocytes). Bioinformatics analyses revealed four putative E. tenella cyclins (EtCYCs) that are closely related to cyclins found in the human apicomplexan parasite Plasmodium falciparum. EtCYC3a was cloned, expressed in Escherichia coli and purified in a complex with EtCRK2. Using the non-radioactive time-resolved fluorescence energy transfer (TR-FRET) assay, we demonstrated the ability of EtCYC3a to activate EtCRK2 as shown previously for XlRINGO. The EtCRK2/EtCYC3a complex was used for a combined in vitro and in silico high-throughput screening approach, which resulted in three lead structures, a naphthoquinone, an 8-hydroxyquinoline and a 2-pyrimidinyl-aminopiperidine-propane-2-ol. This constitutes a promising starting point for the subsequent lead optimization phase and the development of novel anticoccidial drugs

Diversity oriented synthesis : substitution at C5 in unreactive pyrimidines by Claisen rearrangement and reactivity in nucleophilic substitution at C2 and C4 in pteridines and pyrido[2,3-d]pyrimidines

Diversity oriented synthesis of fused pyrimidines leads to scaffolds with many biological activities. In the case of the preparation of pyrido[2,3-d]pyrimidines from 2-alkylthiopyrimidines, the formation of a new carbon-carbon bond at C5 is required, a reaction that is very limited in scope. However Claisen type rearrangement of simple 4-allylic ethers affords C5 substituted pyrimidines readily; in cases with an ester substituent, rearrangement occurs at room temperature. Subsequent cyclisation to afford 6-methylpyrido[2,3-d]pyrimidin-7(8H)-ones was achieved in high yield. Using allylic ethers derived from 3-chloromethyl-4-arylbut-3-en-2-ones as substrates, a new titanium[IV]chloride catalysed reaction affording 6-arylmethyl-7-methylpyrido[2,3-d]pyrimidines was discovered. In contrast, 2-alkylthiopteridines are readily available. In both cases, substitution at C2 and C4 to generate diversity has been carried out and the reactivity compared; yields of substitution products were generally higher with pteridine substrates. In biological assays unexpected hits were found for activity against the Gram positive bacterium, Nocardia farcinia, and against the parasite Trypanosoma brucei brucei, illustrating the value of diversity oriented synthesis in the discovery of biologically active compound

Electron transport through dipyrimidinyl-diphenyl diblock molecular wire: protonation effect

Recently, rectifying direction inversion has been observed in dipyrimidinyl-diphenyl (PMPH) diblock molecular wire [J. Am. Chem. Soc. (2005) 127, 10456], and a protonation mechanism was suggested to explain this interesting phenomena. In this paper, we study the protonation effect on transport properties of PMPH molecule by first principles calculations. No significant rectification is found for the pristine diblock molecular wire. Protonation leads to conductance enhancement and rectification. However, for all considered junctions with rectifying effect, the preferential current directions are samely from dipyrimidinyl side to diphenyl side. Effect of molecule-electrode anchoring geometry is studied, and it is not responsible for the discrepancy between experiment and theory.Comment: 17 pages, 8 figure

Design of OsII-based Sensitizers for Dye-Sensitized Solar Cells:Influence of Heterocyclic Ancillaries

A series of OsII sensitizers (TFOS-x, in which x=1, 2, or 3) with a single 4,4′-dicarboxy-2,2′-dipyridine (H2dcbpy) anchor and two chelating 2-pyridyl (or 2-pyrimidyl) triazolate ancillaries was successfully prepared. Single-crystal X-ray structural analysis showed that the core geometry of the OsII-based sensitizers consisted of one H2dcbpy unit and two eclipsed cis-triazolate fragments; this was notably different from the RuII-based counterparts, in which the azolate (both pyrazolate and triazolate) fragments are located at the mutual trans-positions. The basic properties were extensively probed by using spectroscopic and electrochemical methods as well as time-dependent density functional theory (TD-DFT) calculations. Fabrication of dye-sensitized solar cells (DSCs) was then attempted by using the I−/I3−-based electrolyte solution. One such DSC device, which utilized TFOS-2 as the sensitizer, showed promising performance characteristics with a short-circuit current density (JSC) of 15.7 mA cm−2, an open-circuit voltage of 610 mV, a fill factor of 0.63, and a power conversion efficiency of 6.08 % under AM 1.5G simulated one-sun irradiation. Importantly, adequate incident photon-to-current conversion efficiency performances were observed for all TFOS derivatives over the wide spectral region of 450 to 950 nm, showing a panchromatic light harvesting capability that extended into the near-infrared regime. Our results underlined a feasible strategy for maximizing JSC and increasing the efficiency of DSCs

Synthesis and sorption properties of filled fibrous sorbents with immobilized hetarylformazan groups

New sorbents were prepared by immobilization of structurally different sulfur-containing hetaryl-formazans on nonwoven polyacrylonitrile fiber tilled with AV-17 anion exchanger. Sorption of some heavy metals on these materials was studied as influenced by various factors. Sorbents for selective recovery of copper(II) in the presence of nickel(II), zinc(II), and cadmium(II) cations were found

Performance of the ALOGPS 2.1 program for octanol-water partition coefficient prediction with organic chemicals on the Canadian Domestic Substances List

The KOWWIN and ALOGPS octanol-water partition coefficient (K~ow~) estimation software programs were compared for their capacity to accurately predict log K~ow~ values of 1545 organic compounds on the publicly available Domestic Substances List (DSL) from Environment Canada for which experimental data is available. Approximately equivalent log K~ow~ error statistics were observed between KOWWIN and ALOGPS against available experimental data. Substantial predictive differences were observed between the two programs for 6529 compounds not having experimental K~ow~ data on the Canadian DSL. Predictive differences of up to 40 log K~ow~ units were found between KOWWIN and ALOGPS, and in some cases, the discrepancies were sufficiently large that strongly opposing hydrophobicity classifications were obtained

Synthesis of some new Thienopyrimidine with Benzoxazine, Quinazoline and Azole Moieties

Reaction of thienopyrimidinoyl chloride 3 with  2-aminocyclohexanothiophene-3-carboxamide 4 yielded thienopyrimidine derivative 5 that undergoes cyclodehydration to afford thienopyrimidine 6. The synthesis of benzamidazole 8 and benzoxazole 10 derivatives was achieved by condensation of thienopyrimidinoyl chloride 3 and o-phenylenediamine / o-aminophenol followed by cyclization. Reaction of 4-thio-6-methyl-2-(p-methoxyphenyl)-5-acetylpyrimidine 1 and N(o-carboxyphenyl) chloroacetamide11 yielded pyrimidine derivative 12 that cyclized to benzoxazine 13. Compound 13 was transformed to quinazoline derivatives 14a-c and 16. Reaction of 13 with semicarbazide yielded triazoloquinazoline 18