Towards an overheating risk tool for building design

PurposeThe work set out to design and develop an overheating risk tool using the UKCP09 climate projections that is compatible with building performance simulation software. The aim of the tool is to exploit the Weather Generator and give a reasonably accurate assessment of a building's performance in future climates, without adding significant time, cost or complexity to the design team's work.Methodology/approachBecause simulating every possible future climate is impracticable, the approach adopted was to use principal component analysis to give a statistically rigorous simplification of the climate projections. The perceptions and requirements of potential users were assessed through surveys, interviews and focus groups.FindingsIt is possible to convert a single dynamic simulation output into many hundreds of simulation results at hourly resolution for equally probable climates, giving a population of outcomes for the performance of a specific building in a future climate, thus helping the user choose adaptations that might reduce the risk of overheating. The tool outputs can be delivered as a probabilistic overheating curve and feed into a risk management matrix. Professionals recognized the need to quantify overheating risk, particularly for non‐domestic buildings, and were concerned about the ease of incorporating the UKCP09 projections into this process. The new tool has the potential to meet these concerns.Originality/valueThe paper is the first attempt to link UKCP09 climate projections and building performance simulation software in this way and the work offers the potential for design practitioners to use the tool to quickly assess the risk of overheating in their designs and adapt them accordingly.</jats:sec

Overheating threshold and its effect on time–temperature-transformation diagrams of zirconium based bulk metallic glasses

A pronounced effect of overheating is observed on the crystallization behavior for the three zirconium-based bulk metallic glasses: Zr41.2Ti13.8Cu12.5Ni10Be22.5, Zr57Cu15.4Ni12.6Al10Nb5, and Zr52.5Cu17.9Ni14.6Al10Ti5. A threshold overheating temperature is found for each of the three alloys, above which there is a drastic increase in the undercooling level and the crystallization times. Time–temperature-transformation (TTT) diagrams were measured for the three alloys by overheating above their respective threshold temperatures. The TTT curves for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5 are very similar in shape and scale with their respective glass transition temperatures, suggesting that system-specific properties do not play a crucial role in defining crystallization kinetics in these alloys. The critical cooling rates to vitrify the alloys as determined from the TTT curves are about 2 K/s for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and 10 K/s for Zr57Cu15.4Ni12.6Al10Nb5. The measurements were conducted in a high-vacuum electrostatic levitator

Evaluation on overheating risk of a typical Norwegian residential building under future extreme weather conditions

As the temperature in the summer period in Norway has been always moderate, little study on the indoor comfort of typical Norwegian residential buildings in summer seasons can be found. Heat waves have attacked Norway in recent years, including in 2018 and 2019. Zero energy buildings, even neighborhoods, have been a hot research topic in Norway. There is overheating risk in typical Norwegian residential buildings without cooling devices installed under these uncommon weather conditions, like the hot summers in 2018 and 2019. Three weather scenarios consisting of present-day weather data, 2050 weather data, and 2080 weather data are investigated in this study. The overheating risk of a typical Norwegian residential building is evaluated under these three weather scenarios. 72 scenarios are simulated in this study, including different orientations, window-to-wall ratios, and infiltration rates. Two different overheating evaluation criteria and guidelines, the Passive House Planning Package (PHPP) and the CIBSE TM 59, are compared in this study

Trombe walls with nanoporous aerogel insulation applied to UK housing refurbishments

There is an opportunity to improve the efficiency of passive Trombe walls and active solar air collectors by replacing their conventional glass covers with lightweight polycarbonate panels filled with nanoporous aerogel insulation. This study investigates the thermal performance, energy savings, and financial payback period of passive Aerogel Trombe walls applied to the existing UK housing stock. Using parametric modeling, a series of design guidance tables have been generated, providing estimates of the energy savings and overheating risk associated with applying areas of Trombe wall to four different house types across the UK built to six notional construction standards. Calculated energy savings range from 183 kWh/m2/year for an 8 m2 system retrofitted to a solid walled detached house to 62 kWh/m2/year for a 32 m2 system retrofitted to a super insulated flat. Predicted energy savings from Trombe walls up to 24 m2 are found to exceed the energy savings from external insulation across all house types and constructions. Small areas of Trombe wall can provide a useful energy contribution without creating a significant overheating risk. If larger areas are to be installed, then detailed calculations would be recommended to assess and mitigate potential overheating issues.The EPSRC, Brunel University, and Buro Happold Lt

Effects of broadening and electron overheating in tunnel structures based on metallic clusters

We study the influence of energy levels broadening and electron subsystem overheating in island electrode (cluster) on current-voltage characteristics of three-electrode structure. A calculation scheme for broadening effect in one-dimensional case is suggested. Estimation of broadening is performed for electron levels in disc-like and spherical gold clusters. Within the two-temperature model of metallic cluster and by using a size dependence of the Debye frequency the effective electron temperature as a function of bias voltage is found approximately. We suggest that the effects of broadening and electron overheating are responsible for the strong smoothing of current-voltage curves, which is observed experimentally at low temperatures in structures based on clusters consisting of accountable number of atoms.Comment: 8 pages, 5 figure

Pressure dependence of the melting mechanism at the limit of overheating in Lennard-Jones crystals

We study the pressure dependence of the melting mechanism of a surface free Lennard-Jones crystal by constant pressure Monte Carlo simulation. The difference between the overheating temperature($T_{OH}$) and the thermodynamical melting point($T_M$) increase for increasing pressure. When particles move into the repulsive part of the potential the properties at $T_{OH}$ change. There is a crossover pressure where the volume jump becomes pressure-independent. The overheating limit is pre-announced by thermal excitation of big clusters of defects. The temperature zone where the system is dominated by these big clusters of defects increases with increasing pressure. Beyond the crossover pressure we find that excitation of defects and clusters of them start at the same temperature scale related with $T_{OH}$.Comment: 6 pages, 5 figures. Accepted for publication in Physical Review