Service Links and Wage Inequality

In our general equilibrium model, the variety of specialized service links affects international production fragmentation in manufacturing. Decreases in cost of education or fixed cost of service links raise the relative supply of skilled workers, increase service specialization, and decrease the price of aggregate services. Consequently, the market for service- and skill-intensive component manufacturing enlarges, raising relative demand for skilled workers. Empirically, endogenous change in international outsourcing rather than skill-biased technological progress is the main reason for a modest decline in wage gap despite the rapid rise in relative supply of skilled workers in Singapore from 1978 to 2000.Production Fragmentation; Service Links; Wage Inequality; Singapore; Technological Progress

The Critical Challenges from International High-Tech and Computer-Related Crime at the Millennium

The automotive industry stands in front of a great challenge, to decrease its impact on the environment. One important part in succeeding with this is to decrease the structural weight of the body structure and by that the fuel consumption or the required battery power. Carbon fibre composites are by many seen as the only real option when traditional engineering materials are running out of potential for further weight reduction. However, the automotive industry lacks experience working with structural composites and the methods for high volume composite manufacturing are immature. The development of a composite automotive body structure, therefore, needs methods to support and guide the conceptual work to improve the financial and technical results. In this thesis a framework is presented which will provide guidelines for the conceptual phase of the development of an automotive body structure. The framework follows two main paths, one to strive for the ideal material diversity, which also defines an initial partition of the body structure based on the process and material selection. Secondly, a further analysis of the structures are made to evaluate if a more cost and weight efficient solution can be found by a more differential design and by that define the ideal part size. In the case and parameter studies performed, different carbon fibre composite material systems and processes are compared and evaluated. The results show that high performance material system with continuous fibres becomes both more cost and performance effective compared to industrialised discontinuous fibre composites. But also that cycle times, sometimes, are less important than a competitive feedstock cost for a manufacturing process. When further analysing the manufacturing design of the structures it is seen that further partition(s) can become cost effective if the size and complexity is large enough.      QC 20140527</p

Communication and control in small batch part manufacturing

This paper reports on the development of a real-time control network as an integrated part of a shop floor control system for small batch part manufacturing. The shop floor control system is called the production control system (PCS). The PCS aims at an improved control of small batch part manufacturing systems, enabling both a more flexible use of resources and a decrease in the economical batch size. For this, the PCS integrates various control functions such as scheduling, dispatching, workstation control and monitoring, whilst being connected on-line to the production equipment on the shop floor. The PCS can be applied irrespective of the level of automation on the shop floor. The control network is an essential part of the PCS, as it provides a real-time connection between the different modules (computers) of the PCS, which are geographically distributed over the shop floor. An overview of the requirements of such a control network is given. The description of the design includes the services developed, the protocols used and the physical layout of the network. A prototype of the PCS, including the control network, has been installed and tested in a pilot plant. The control network has proven that it can supply a manufacturing environment, consisting of equipment from different vendors with different levels of automation, with a reliable, low cost, real-time communication facility

Benefits of connecting rfid and lean principles in health care

The performance management process in health care is far behind compared to the manufacturing and service industries. Although nowadays the health care organizations are able to deal with a greater rank diseases, their cost, quality and delivery has essentially not improved significantly, and the difference with the other industries even seems to have increased. As opposed to this situation health care has a tremendous opportunity to deploy lean principles to reduce internal/external costs, improve patient safety, increase profits, reduce litigation and decrease the dependence on Government and Insurance. The application of these principles is being facilitated by the use of the new technologies. A new technology allowing personnel to constantly "see" what's happening with regards to patients schedule, backlog, workflow, inventory levels, resource utilization, quality, etc., is Radio Frequency Identification (RFID). The aim of this paper is to analyse the benefits that can be derived from the joint use of lean principles and RFID technology in health care

Public Infrastructure, Input Efficiency and Productivity Growth in the Canadian Food Processing Industry

Canadian food processing is an important manufacturing industry, accounting for 13 percent of shipments. By its nature food processing depends on infrastructure capital. Our objective is to estimate infrastructure’s effects on input requirements, cost and productivity. The increase in capital and decrease in materials were respectively 2.5 and 3 times greater than the -0.07 infrastructure elasticity of labor. Infrastructure investment was cost-reducing by inducing reductions in employment and intermediate inputs. A 1 percent increase caused cost to decline by 0.16 percent. Infrastructure capital was a major contributor to productivity, annually contributing 0.5 percentage points. This was nearly double TFP growth.Food Processing, Infrastructure Capital, Productivity Growth.

Do environmental regulations reduce greenhouse gas emissions? A study on Canadian industries

This paper uses the Canadian industrial macro-level data from CANSIM to investigate the effect of formal and informal regulations on pollution intensity. Proxies for formal and informal regulation variables are defined as in Cole et al., 2005. The econometrics model is a panel with 23 manufacturing industries over 10 years, from 1994 to 2003. Manufacturing industries are chosen because they are the most pollutant industries. It is found that formal and informal regulations have significant effects on decreasing the direct and indirect greenhouse gas emissions in Canadian industries. Provinces with younger populations have stricter informal regulation on pollution density, because younger populations care more about the future quality of the environment. Also, provinces with a higher rate of unemployment have less formal regulation on pollution density; for those provinces, providing employment for citizens is more important than providing a healthy environment. Wealthier provinces with a low employment rate face less pressure from society and can spend more money on the environment; therefore, they have lower pollution density. Furthermore, industries with large average firm size can decrease emissions more than other industries. The cost of controlling the emissions decreases with firm size because of economies of scale.Keywords: Canadian manufacturing industries; Air pollution; Environmental regulations

The Impact of Cost Changes on Industry Dynamics

This paper inquires into the response of industry dynamics to increases in costs. We show that increases in marginal and fixed costs may have interesting, non-obvious effects on entry and exit. Before costs change, the model exhibits behavior that matches many industries such as manufacturing and retail: fewer but larger firms over time, and significant amounts of entry and exit. When costs rise, price rises and the market quantity supplied falls, but the amount of entry and exit may rise or fall. The most intuitive outcome from a cost increase is the competitor neutral case, in which entry decreases and exit increases. Two other possible cases are the entrant favoring case, in which entry and exit both increase, and the incumbent favoring case, in which entry and exit both decrease. The model places restrictions on which outcomes are possible given which costs rise (marginal or fixed). The entrant favoring case can arise only from an increase in marginal cost, which favors small entering firms relative to larger incumbents. The incumbent favoring case can come about only from an increase in fixed cost, which favors incumbents with their larger market share relative to small entrants. These restrictions allow one to infer the nature of the cost increases even when costs are not directly observed. The model can be used to examine the impacts of cost-increasing regulation or exogenous process innovation on industry dynamics.marginal cost, fixed cost, dynamic industry models, entry, exit, failure, market size

Design of generic modular reconfigurable platforms (GMRPS) for a product-oriented micro manufacturing system

With the proposition of the concept of product-service systems, many manufacturers are focusing on selling services or functionality rather than products. Industrial production is shifting production models from mass production to mass customization and highly personalized needs. As a result, there is a tendency for manufacturing system suppliers to develop product-oriented systems to responsively cope with the dynamic fast moving competitive market. The key features of such a manufacturing system are the reconfigurability and adaptability, which can enable the system respond to the changeable needs of customers quickly and adaptively. Therefore, one of the challenges for the micro manufacturing system provider has been the design of a reconfigurable machine platform which will provide the functionalities and flexibility required by the product-oriented systems. In this paper, a new micro manufacturing platform, i.e. a generic modular reconfigurable platform (GMRP) is proposed in order to provide an effective means for fabrication of high quality micro products at low cost in a responsive manner. The GMRP-based system aims to be a product-oriented reconfigurable, highly responsive manufacturing system particularly for high value nano/micro manufacturing purposes. To reuse components and decrease material consumption, GMRP is characterized by hybrid micro manufacturing processes, modularity of key components, and reconfigurability of machine platforms and key components. Furthermore, a practical methodology for the design of reconfigurable machine platforms is discussed against the requirements from product-driven micro manufacturing and its extension for adaptive production

Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm

Choosing right Rapid Prototyping technology is not easy, especially for companies inexperienced with that group of manufacturing techniques. Paper summarizes research focused on creating an algorithm for expert system, helping to choose optimal process and determine its parameters for thin-walled products rapid manufacturing. Research was based upon trial manufacturing of different thin-walled items using various RP technologies. Products were categorized, each category was defined by a set of requirements. Basing on research outcome, main algorithm has been created. Next step was developing detailed algorithms for optimizing particular methods. Implementation of these algorithms brings huge benefit for recipients, including cost reduction, supply time decrease and improvements in information flow.Peer Reviewe