Radiation data definitions and compilation for equipment qualification data bank

Dose definitions, physical properties, mechanical properties, electrical properties, and particle definitions are listed for insulators and dielectrics, elastomeric seals and gaskets, lubricants, adhesives, and coatings

Qualitative and Quantitative Aquatic Algal Data Compilation to Determine Macrotrends

A data base of the algae of Arkansas has been initiated by the selection of a relational data base management system. The system was chosen to be readily available for microcomputers using MS- or PC-DOS. The initial parameters chosen for entry are associated with the classification of the organisms from Class to the Variety level with author and year of initiation. Further annotation includes identification source. Presently, the data base of 1,162 taxa includes 226 Cyanophyceae, 367 Chlorophyceae, 124 Euglenophyceae, 26 Xanthophyceae, 81 Chryso- phyceae, 279 Bacillariophyceae, 33 Pyrrhophyceae, 14 Cryptophyceae, and 5 Rhodophyceae. These taxa are sortable by any of the included parameters. The data base will be archived as a portion of the flora and fauna series of the state of Arkansas

Compilation of the data on the land withdrawals in Alaska

Major decisions an the use and disposition of land in Alaska are being made by the State and Federal governments. These decisions will affect the utilization of all our land resources including minerals. Since minerals are an essential component of our existance, the availability and access to minerals is an important issue. There are approximately 2600 land orders and acts classifying land in Alaska that restrict the utilization of our minerals resources. As of April 1977, approximately twenty-six percent of Alaska, or 100,875,391 acres was open to mineral entry and location under the Federal Mining Laws and the State Mining and Mineral leasing Laws

Compilation of Giant Electric Dipole Resonances Built on Excited States

Giant Electric Dipole Resonance (GDR) parameters for gamma decay to excited states with finite spin and temperature are compiled. Over 100 original works have been reviewed and from some 70 of which more than 300 parameter sets of hot GDR parameters for different isotopes, excitation energies, and spin regions have been extracted. All parameter sets have been brought onto a common footing by calculating the equivalent Lorentzian parameters. The current compilation is complementary to an earlier compilation by Samuel S. Dietrich and Barry L. Berman (At. Data Nucl. Data Tables 38(1988)199-338) on ground-state photo-neutron and photo-absorption cross sections and their Lorentzian parameters. A comparison of the two may help shed light on the evolution of GDR parameters with temperature and spin. The present compilation is current as of January 2006.Comment: 31 pages including 1 tabl

Cryogenic Data Center Activities Semiannual Progress Report, 1 Jan. - 30 Jun. 1966

Activities of Data Compilation and Documentation unit

Materials data handbook, aluminum alloy 6061

Comprehensive compilation of technical data on aluminum alloy 6061 is presented in handbook form. The text includes data on the properties of the alloy at cryogenic, ambient, and elevated temperatures and other pertinent information required for the design and fabrication of components and equipment utilizing this alloy

Investigation of spacecraft coatings

Literature review provides compilation of properties of coating materials used for external application on space vehicles. Attention is given to absorptance-emittance data and experimental spectral reference curves

A compilation of information and data on the Manson impact structure

A problem for the impact hypothesis for the Cretaceous-Tertiary (K-T) mass extinction is the apparent absence of an identifiable impact site. The Manson Impact Structure is a candidate because it is the largest recognized in the U.S.; it is relatively close to the largest and most abundant shocked quartz grains found at the K-T boundary; and its age is indistinguishable from that of the K-T boundary based on paleontological evidence, fission track dates, and preliminary Ar-40/Ar-39 measurements. The region of northwest central Iowa containing the Manson Impact Structure is covered by Quaternary glacial deposits underlain by Phanerozoic sedimentary rocks (mostly flat-lying carbonates) and Proterozoic red clastic, metamorphic, volcanic, and plutonic rocks. In a circular area about 22 miles (35 km) in diameter around Manson, Iowa, this normal sequence is absent or disturbed and near the center of the disturbed area granitic basement rocks have been uplifted some 20,000 ft (6000m). Attention was drawn to Manson initially by the unusual quality of the groundwater there. Within the structure three roughly concentric zones of rock associations have been identified: (1) displaced strata; (2) completely disrupted strata, and igneous and metamorphic rocks. Manson was established as an impact structure based on its circular shape, its central uplift, and the presence of shocked quartz within the granitic central uplift. A gravity survey identified locations of low-density brecciated rocks and high-density uplifted crystalline rocks, but the outer boundary of the structure could not be established. Aeromagnetic and ground magnetic surveys showed locations and depths of shallowly buried crystalline rock and the locations of faults. A refraction seismic survey identified the crystalline central uplift, determined that the average elevation of bedrock is 70 ft (20 m) higher outside the structure than within, and was used to map the bedrock topography within the structure. A connection between the Manson impact and the K-T boundary may be established or refuted through study of the impact energy, the impact time, and composition of host rock, possible impactors, and impact melts

Bearing tester data compilation, analysis, and reporting and bearing math modeling

The Shaberth bearing analysis computer program was developed for the analysis of jet engine shaft/bearing systems operating above room temperature with normal hydrocarbon lubricants. It is also possible to use this tool to evaluate the shaft bearing systems operating in cryogenics. Effects such as fluid drag, radial temperature gradients, outer race misalignments and clearance changes were simulated and evaluated. In addition, the speed and preload effects on bearing radial stiffness was evaluated. The Shaberth program was also used to provide contact stresses from which contact geometry was calculated to support other analyses such as the determination of cryogenic fluid film thickness in the contacts and evaluation of surface and subsurface stresses necessary for bearing failure evaluation. This program was a vital tool for the thermal analysis of the bearing in that it provides the heat generation rates at the rolling element/race contacts for input into a thermal model of the bearing/shaft assembly