Nanostructured Conductive Polymers for Advanced Energy Storage

Conductive polymers combine the attractive properties associated with conventional polymers and unique electronic properties of metals or semiconductors. Recently, nanostructured conductive polymers have aroused considerable research interest owing to their unique properties over their bulk counterparts, such as large surface areas and shortened pathways for charge/mass transport, which make them promising candidates for broad applications in energy conversion and storage, sensors, actuators, and biomedical devices. Numerous synthetic strategies have been developed to obtain various conductive polymer nanostructures, and high-performance devices based on these nanostructured conductive polymers have been realized. This Tutorial review describes the synthesis and characteristics of different conductive polymer nanostructures; presents the representative applications of nanostructured conductive polymers as active electrode materials for electrochemical capacitors and lithium-ion batteries and new perspectives of functional materials for next-generation high-energy batteries, meanwhile discusses the general design rules, advantages, and limitations of nanostructured conductive polymers in the energy storage field; and provides new insights into future directions.University of Texas at Austin3M Non-tenured Faculty awardWelch Foundation F-1861Materials Science and Engineerin

Memristive excitable cellular automata

The memristor is a device whose resistance changes depending on the polarity and magnitude of a voltage applied to the device's terminals. We design a minimalistic model of a regular network of memristors using structurally-dynamic cellular automata. Each cell gets info about states of its closest neighbours via incoming links. A link can be one 'conductive' or 'non-conductive' states. States of every link are updated depending on states of cells the link connects. Every cell of a memristive automaton takes three states: resting, excited (analog of positive polarity) and refractory (analog of negative polarity). A cell updates its state depending on states of its closest neighbours which are connected to the cell via 'conductive' links. We study behaviour of memristive automata in response to point-wise and spatially extended perturbations, structure of localised excitations coupled with topological defects, interfacial mobile excitations and growth of information pathways.Comment: Accepted to Int J Bifurcation and Chaos (2011

Activation of electroneutral K flux in Amphiuma red blood cells by N-ethylmaleimide. Distinction between K/H exchange and KCl cotransport.

Exposure of Amphiuma red blood cells to millimolar concentrations of N-ethylmaleimide (NEM) resulted in net K loss. In order to determine whether net K loss was conductive or was by electroneutral K/H exchange or KCl cotransport, studies were performed evaluating K flux in terms of the thermodynamic forces to which K flux by the above pathways should couple. The direction and magnitude of the NEM-induced net K flux did not correspond with the direction and magnitude of the forces relevant to K conductance or electroneutral KCl cotransport. Both the magnitude and direction of the NEM-activated K flux responded to the driving force for K/H exchange. We therefore conclude that NEM-induced K loss, like that by osmotically swollen Amphiuma red blood cells, is by an electroneutral K/H exchanger. In addition to the above studies, we evaluated the kinetic behavior of the volume- and NEM-induced K/H exchange flux pathways in media where Cl was replaced by SCN, NO3, para-aminohippurate (PAH), or gluconate. The anion replacement studies did not permit a distinction between K/H exchange and KCl cotransport, since, depending upon the anion used as a Cl replacement, partial inhibition or stimulation of volume-activated K/H exchange fluxes was observed. In contrast, all anions used were stimulatory to the NEM-induced K loss. Since, on the basis of force-flow analysis, both volume-and NEM-induced K loss are K/H exchange, it was necessary to reevaluate assumptions (i.e., anions serve as substrates and therefore probe the translocation step) associated with the use of anion replacement as a means of flux route identification. When viewed together with the force-flow studies, the Cl replacement studies suggest that anion effects upon K/H exchange are indirect. The different anions appear to alter mechanisms that couple NEM exposure and cell swelling to the activation of K/H exchange, as opposed to exerting direct effects upon K and H translocation

Electrical conductivity of carbon nanofiber reinforced resins: potentiality of Tunneling Atomic Force Microscopy (TUNA) technique

Epoxy nanocomposites able to meet pressing industrial requirements in the field of structural material have been developed and characterized. Tunneling Atomic Force Microscopy (TUNA), which is able to detect ultra-low currents ranging from 80 fA to 120 pA, was used to correlate the local topography with electrical properties of tetraglycidyl methylene dianiline (TGMDA) epoxy nanocomposites at low concentration of carbon nanofibers (CNFs) ranging from 0.05% up to 2% by wt. The results show the unique capability of TUNA technique in identifying conductive pathways in CNF/resins even without modifying the morphology with usual treatments employed to create electrical contacts to the ground

Paper Based Pressure Sensor for Green Electronics

This work reports a resistive paper-based disposable pressure sensor based on porous 3D conductive cellulose micro-fiber network. The conductivity in microfibers was achieved by subjecting the network to graphene oxide (GO) - poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT: PSS) solution. The modified cellulose matrix is sandwiched between graphite paper electrodes so that overall structure is flexible. The device tested in 32-386 Pa range detected a minimum of 34 Pa and exhibited fast dynamic response (in tenths of seconds) with excellent repeatability. The proposed approach for disposable sensors is a step towards green electronics and holds promise for wide range of wearable applications

Origin of multi-level switching and telegraphic noise in organic nanocomposite memory devices.

The origin of negative differential resistance (NDR) and its derivative intermediate resistive states (IRSs) of nanocomposite memory systems have not been clearly analyzed for the past decade. To address this issue, we investigate the current fluctuations of organic nanocomposite memory devices with NDR and the IRSs under various temperature conditions. The 1/f noise scaling behaviors at various temperature conditions in the IRSs and telegraphic noise in NDR indicate the localized current pathways in the organic nanocomposite layers for each IRS. The clearly observed telegraphic noise with a long characteristic time in NDR at low temperature indicates that the localized current pathways for the IRSs are attributed to trapping/de-trapping at the deep trap levels in NDR. This study will be useful for the development and tuning of multi-bit storable organic nanocomposite memory device systems

Recent advances in electron transfer between biofilms and metals

Microbial biofilms produce electrochemical interactions with metal surfaces by following a wide variety of different electron exchange pathways. Reviewing the mechanisms identified in the biocorrosion of steels leads us to distinguish direct and indirect mechanisms for biofilm-catalysed cathodic reactions. Indirect mechanisms are due to the production of metal oxides or hydrogen peroxide (aerobic corrosion) or metal sulphides (anaerobic corrosion), which further react with the metal surface. Direct mechanisms involve adsorbed biocompounds, generally enzymes or their active sites, which catalyse the cathodic reduction of oxygen for aerobic biocorrosion or the proton/water reduction in anaerobic processes. Recent studies dealing with the role of hydrogenases in anaerobic corrosion have shed light on the important role of phosphate species via so-called cathodic deprotonation. Advances in the development of microbial fuel cells have also resulted in new concepts, mainly for oxidation processes. Some microbial cells have been shown to be able to produce their own electron mediators. Others can transfer electrons directly to electrodes through membrane-bound electron shuttles or achieve long-range transfer through conductive pili

Numerical simulation of spacecraft charging phenomena

A numerical simulation program is being constructed having the following features: (1) infinite circular cylindrical geometry with angle-dependence, (2) inclusion of incident particles, photoelectrons, secondary electrons, backscattered electrons, any gun emissions, and any internal current pathways including surface conductive layers, (3) quasistatic time-dependent iteration, in which sheath potential changes during particle transit times are ignored, (4) use of approximate, locally-dependent space charge density expressions in solving Poisson's equation for sheath potentials, with use of numerical orbit-following to determine surface currents, and (5) incident particle velocity distributions isotropic or beam-like, or some superposition of these. Rationales for each of these features are discussed