51 research outputs found
Single channel based interference-free and self-powered human-machine interactive interface using eigenfrequency-dominant mechanism
The recent development of wearable devices is revolutionizing the way of
human-machine interaction (HMI). Nowadays, an interactive interface that
carries more embedded information is desired to fulfil the increasing demand in
era of Internet of Things. However, present approach normally relies on sensor
arrays for memory expansion, which inevitably brings the concern of wiring
complexity, signal differentiation, power consumption, and miniaturization.
Herein, a one-channel based self-powered HMI interface, which uses the
eigenfrequency of magnetized micropillar (MMP) as identification mechanism, is
reported. When manually vibrated, the inherent recovery of the MMP caused a
damped oscillation that generates current signals because of Faraday's Law of
induction. The time-to-frequency conversion explores the MMP-related
eigenfrequency, which provides a specific solution to allocate diverse commands
in an interference-free behavior even with one electric channel. A cylindrical
cantilever model was built to regulate the MMP eigenfrequencies via precisely
designing the dimensional parameters and material properties. We show that
using one device and two electrodes, high-capacity HMI interface can be
realized when the MMPs with different eigenfrequencies have been integrated.
This study provides the reference value to design the future HMI system
especially for situations that require a more intuitive and intelligent
communication experience with high-memory demand.Comment: 35 pages, 6 figure
Enhanced energy harvesting performance in lead-free multi-layer piezoelectric composites with a highly aligned pore structure
The harvesting of mechanical energy from our living environment via piezoelectric energy harvesters to provide power for next generation wearable electronic devices and sensors has attracted significant interest in recent years. Among the range of available piezoelectric materials, porous piezoelectric ceramics exhibit potential for both sensing and energy harvesting applications due to their reduced relative permittivity and enhanced piezoelectric sensing and energy harvesting figures of merit. Despite these developments, the low output power density and the lack of optimized structural design continues to restrict their application. Here, to overcome these challenges, a lead-free multi-layer porous piezoelectric composite energy harvester with a highly aligned pore structure and three-dimensional intercalation electrodes is proposed, fabricated and characterized. The effect of material structure and multi-layer configuration of the porous piezoelectric ceramic on the dielectric properties, piezoelectric response and energy harvesting performance was investigated in detail. Since the relative permittivity is significantly reduced due to the introduction of aligned porosity within the multi-layer structure, the piezoelectric voltage coefficient, energy harvesting figure of merit and output power are greatly enhanced. The multi-layer porous piezoelectric composite energy harvester is shown to generate a maximum output current of 80 μA, with a peak power density of 209 μW cm−2, which is significantly higher than other porous piezoelectric materials reported to date. Moreover, the generated power can charge a 10 μF capacitor from 0 V to 4.0 V in 150 s. This work therefore provides a new strategy for the design and manufacture of porous piezoelectric materials for piezoelectric sensing and energy harvesting applications.</p
Enhanced energy harvesting performance in lead-free multi-layer piezoelectric composites with a highly aligned pore structure
The harvesting of mechanical energy from our living environment via piezoelectric energy harvesters to provide power for next generation wearable electronic devices and sensors has attracted significant interest in recent years. Among the range of available piezoelectric materials, porous piezoelectric ceramics exhibit potential for both sensing and energy harvesting applications due to their reduced relative permittivity and enhanced piezoelectric sensing and energy harvesting figures of merit. Despite these developments, the low output power density and the lack of optimized structural design continues to restrict their application. Here, to overcome these challenges, a lead-free multi-layer porous piezoelectric composite energy harvester with a highly aligned pore structure and three-dimensional intercalation electrodes is proposed, fabricated and characterized. The effect of material structure and multi-layer configuration of the porous piezoelectric ceramic on the dielectric properties, piezoelectric response and energy harvesting performance was investigated in detail. Since the relative permittivity is significantly reduced due to the introduction of aligned porosity within the multi-layer structure, the piezoelectric voltage coefficient, energy harvesting figure of merit and output power are greatly enhanced. The multi-layer porous piezoelectric composite energy harvester is shown to generate a maximum output current of 80 μA, with a peak power density of 209 μW cm−2, which is significantly higher than other porous piezoelectric materials reported to date. Moreover, the generated power can charge a 10 μF capacitor from 0 V to 4.0 V in 150 s. This work therefore provides a new strategy for the design and manufacture of porous piezoelectric materials for piezoelectric sensing and energy harvesting applications.</p
Comprehensive analysis of NAC transcription factors in diploid Gossypium: sequence conservation and expression analysis uncover their roles during fiber development
Flexible PET/EVA-Based Piezoelectret Generator for Energy Harvesting in Harsh Environments
Stable and repeatable operation is paramount for practical and extensive applications of all energy harvesters. Herein, we develop a new type of flexible piezoelectret generator, which converts mechanical energy into electricity consistently even under harsh environments. Specifically, the generator, with piezoelectric coefficient (d33) reaching ~ 6300 pC/N, had worked stably for continuous ~ 90000 cycles, and the generator pressed by a human hand produced load peak current and power up to ~ 29.6 μA and ~ 0.444 mW, respectively. Moreover, the capability to steadily produce electrical power under extreme moisture and temperature up to 70 oC had been achieved for possible applications in wearable devices and flexible electronics.Accepted versio
Fiber-Based Generator for Wearable Electronics and Mobile Medication
Smart garments for monitoring physiological and biomechanical signals of the human body are key sensors for personalized healthcare. However, they typically require bulky battery packs or have to be plugged into an electric plug in order to operate. Thus, a smart shirt that can extract energy from human body motions to run body-worn healthcare sensors is particularly desirable. Here, we demonstrated a metal-free fiber-based generator (FBG) <i>via</i> a simple, cost-effective method by using commodity cotton threads, a polytetrafluoroethylene aqueous suspension, and carbon nanotubes as source materials. The FBGs can convert biomechanical motions/vibration energy into electricity utilizing the electrostatic effect with an average output power density of ∼0.1 μW/cm<sup>2</sup> and have been identified as an effective building element for a power shirt to trigger a wireless body temperature sensor system. Furthermore, the FBG was demonstrated as a self-powered active sensor to quantitatively detect human motion
Fossil and Non-fossil Fuel Sources of Organic and Elemental Carbonaceous Aerosol in Beijing, Shanghai, and Guangzhou: Seasonal Carbon Source Variation
We measured the radiocarbon isotope signals in various fractions of carbonaceous aerosols sampled across four seasons (Oct 2013–Jul 2014) in three megacities of China, viz., Beijing, Shanghai, and Guangzhou. The contributions of fossil fuel (FF) and non-fossil fuel (NF) to the carbonaceous aerosol were estimated based on the radiocarbon content in the organic carbon (OC), water-soluble organic carbon (WSOC), water-insoluble organic carbon (WIOC), and elemental carbon (EC). Although NF generated the primary share (> 55%) during autumn in all of the cities, the seasonal contributions of the sources differed by location during the rest of the year. During winter, FF emissions constituted the majority of the carbonaceous pollution (64%) in Beijing, probably as a result of increased coal combustion for heating. On average, the EC, WSOC, and WIOC generated by FF composed ~10%, 35%, and 19% of the total carbon (TC). Overall, NF was identified as the largest source of carbonaceous aerosol in Guangzhou (63%), whereas FF was the largest source, contributing slightly more than NF, in Shanghai (54%). During spring and summer, FF played a greater role than NF in Beijing (~55%) and Guangzhou (~63%); additionally, based on our limited number of samples, it contributed 71% in Shanghai during the latter season, with a significant portion due to fuel combustion (i.e., industrial, vehicular, fishing-boat, and large-vessel emissions)
Perspective on Porous Piezoelectric Ceramics to Control Internal Stress
Due to the unique electromechanical energy conversion capability of ferroelectric materials, they have been at the forefront of materials science for a variety of applications such as sensors, actuators and energy harvesting. Researchers have focused on exploring approaches to achieve improved ferroelectric performance, and to ensure that the available material systems are more environmentally friendly. This comprehensive review summarizes recent research progress on porous ceramics and highlights the variety of factors that are often ignored, namely the influence of porosity on the Curie temperature, and applications of porous ferroelectric materials with adjustable Curie temperature. Finally, the development trends and challenges of porous ferroelectric materials are discussed, aiming to provide new insights for the design and construction of ferroelectric materials
A theoretical study on the optical properties of black silicon
There is a wide application prospect in black silicon, especially in solar cells and photoelectric detectors. For further optimization of black silicon, it is important to study its optical properties. Especially, the influence of the surface nanostructures on these properties and the light propagation within the nanostructures are relevant. In this paper, two kinds of black silicon models are studied via the finite differences time domain method. The simulated reflectance spectra matches well with the measured curve. Also, the light intensity distribution within the nanostructures shows that near 80% of the incident light are redirected and subjected to internal reflection, which provides powerful support for the good light trapping properties of black silicon
Characterisation of Pasting, Structural and Volatile Properties of Potato Flour
Potato flour is an important raw material for potato staple food products; nevertheless, the quality and flavor vary significantly due to process changes. In this study, the physicochemical features of fresh and five different dehydration temperature potato samples, including the degree of starch gelatinization (DG), pasting, structure properties and volatile components, were compared to investigate the effect of hot air drying (HAD) on potato flour. The results showed that the degree of pasting, viscosity and volatile aroma components changed significantly with differences in drying temperature. With the increase in drying temperature, the gelatinization degree and peak viscosity of potato powder increased or decreased, the breakdown viscosity of HAD-50 was higher, the setback viscosity of HAD-90 was higher, while the crystallization zone of HAD-90 was destroyed due to the high temperature. The flavor components of potato flour are increased during processing due to lipid oxidation, Maillard reaction and thermal degradation. The level of aldehydes,3,5-Octadien-2-one and E,E)-3,5-Octadien-2-one gradually reduced as the processing temperature increased, while the content of furans grew and then decreased, nonanal and 2-Penty-l-Furan increased. Overall, lower HAD temperatures are beneficial for the quality and flavor of potato flour. The information presented here will be useful for the further development of potato flour products
- …