A Survey on Users' Perspectives to Functionalities of Web-Based Construction Collaboration Extranets

Construction collaboration extranets (CCEs) provide various functionalities depending on the vendors' origins, history, experiences, and financial status. Previous research has listed and described the functionalities that extranet systems can be capable of providing. However, no publication was found so far to systematically analyze users' perspectives to the provided functionalities. This article is to bridge this gap through a questionnaire survey to the users. It aims at examining user's attitude to functionalities of CCEs. The result may be useful to information system vendors, end-users and researchers involved in CCEs development and implementation

Hypertension in China: burdens, guidelines and policy responses: a state-of-the-art review.

Hypertension is a leading risk factor of cardiovascular disease and it is becoming increasingly prevalent globally. Correspondingly, the Chinese government and public health institutions have issued a series of policy documents and guidelines for hypertension. However, no comprehensive review of such documents has been conducted. Hence, this review aims to provide an up-to-date and comprehensive assessment of not only the disease burden, but also hypertension management policies and guidelines in China. A total of 15 epidemiological studies based on national population surveys, 15 Chinese Hypertension Guidelines, and seven policy documents were identified. We found a larger burden of hypertension in men, while the awareness, treatment, and control rates have remained low in both sexes. The ranges of hypertension prevalence, awareness, treatment, and control rate among hypertensive patients were 18.0-44.7%, 23.6-56.2%, 14.2-48.5%, and 4.2-30.1% respectively. Chinese hypertension guidelines provide evidence-based instructions to healthcare practitioners over hypertension management in which primary healthcare is increasingly emphasized. Finally, the policy documents set national goals for hypertension management and standardized the services provided in primary healthcare. The findings highlight the importance of integrating new guidelines into hypertension management provided by primary healthcare practitioners and the need to evaluate the implementation of guidelines and policies

A Holistic Review of Cement Composites Reinforced with Graphene Oxide

Adopting a holistic review approach, this study started from the scientometric analysis by analyzing the mainstream journals, keywords, scholars, publications, and institutions active in the research of cement composites reinforced with graphene oxide (GO). Further statistical summary of research themes and in-depth discussion addressed the current research findings and gaps in terms of workability, mechanical properties, durability, and other issues when adding GO into cementitious materials. Recommendations for future research were provided, including but not limited to the necessity to study the long-term mechanical properties of cement composites reinforced with GO, and the application of GO in concrete

Temporally and Longitudinally Tailored Dynamic Space-Time Wave Packets

In general, space-time wave packets with correlations between transverse spatial fields and temporal frequency spectra can lead to unique spatiotemporal dynamics, thus enabling control of the instantaneous light properties. However, spatiotemporal dynamics generated in previous approaches manifest themselves at a given propagation distance yet not arbitrarily tailored longitudinally. Here, we propose and demonstrate a new versatile class of judiciously synthesized wave packets whose spatiotemporal evolution can be arbitrarily engineered to take place at various predesigned distances along the longitudinal propagation path. Spatiotemporal synthesis is achieved by introducing a 2-dimensional spectrum comprising both temporal and longitudinal wavenumbers associated with specific transverse Bessel-Gaussian fields. The resulting spectra are then employed to produce wave packets evolving in both time and axial distance - in full accord with the theoretical analysis. In this respect, various light degrees of freedom can be independently manipulated, such as intensity, polarization, and transverse spatial distribution (e.g., orbital angular momentum). Through a temporal-longitudinal frequency comb spectrum, we simulate the synthesis of the aforementioned wave packet properties, indicating a decrease in relative error compared to the desired phenomena as more spectral components are incorporated. Additionally, we experimentally demonstrate tailorable spatiotemporal fields carrying time- and longitudinal-varying orbital angular momentum, such that the local topological charge evolves every ~1 ps in the time domain and 10 cm axially. We believe that our space-time wave packets can significantly expand the exploration of spatiotemporal dynamics in the longitudinal dimension, and potentially enable novel applications in ultrafast microscopy, light-matter interactions, and nonlinear optics

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Numerical Investigation on Proppant–Water Mixture Transport in Slot under High Reynolds Number Conditions

Water hydraulic fracturing involves pumping low viscosity fluid and proppant mixture into the artificial fracture under a high pumping rate. In that high Reynolds number conditions (HRNCs, Re > 2000), the turbulence effect is one of the key factors affecting proppant transportation and placement. In this paper, a Eulerian multiphase model was used to simulate the proppant particle transport in a parallel slot under HRNCs. Turbulence effects in high pumping rates and frictional stress among the proppant particles were taken into consideration, and the Johnson-Jackson wall boundary conditions were used to describe the particle-wall interaction. The numerical simulation result was validated with laboratory-scale slot experiment results. The simulation results demonstrate that the pattern of the proppant bank is significantly affected by the vortex near the wellbore, and the whole proppant transport process can be divided into four stages under HRNCs. Furthermore, the proppant placement structure and the equilibrium height of proppant dune under HRNCs are comprehensively discussed by a parametrical study, including injection position, velocity, proppant density, concentration, and diameter. As the injection position changes from the lower one to the top one, the unpropped area near the entrance decrease by 7.1 times, and the equilibrium height for the primary dune increase by 5.3%. As the velocity of the slurry jet increases from 2 m/s to 5 m/s (Re = 2000–5000), the vortex becomes stronger, so the non-propped area near the inlet increase by 5.3 times, and the equilibrium height decrease by 5.2%. The change of proppant properties does not significantly change the vortex; however, the equilibrium height is affected by the high-speed flush. Thus, the conventional equilibrium height prediction correlation is not suitable for the HRNCs. Therefore, a modified bi-power law prediction correlation was proposed based on the simulation data, which can be used to accurately predict the equilibrium height of the proppant bank under HRNCs (mean deviation = 3.8%)

Storm Water Management of Low Impact Development in Urban Areas Based on SWMM

LID (low impact development) is the storm management technique designed for controlling runoff in urban areas, which can be used to solve urban flooding disasters. Taking Sucheng District of Suqian City, Jiangsu Province, China as an example, this project used SWMM (storm water management model) to study the effect of four different types of LID scenarios (① no LID technique, ② LID technique based on infiltration, ③ LID technique based on water storage, ④ LID technique based on the combination of infiltration and water storage) on urban flooding under different rainfall patterns. For the whole study area, the results show that infiltration facilities have the greater reduction rate of surface runoff compared with storage facilities. The combined model (infiltration + storage) works best in the reduction of peak flow and flood volume, with the maximum reduction rate of peak flow (32.5%), and the maximum reduction rate of flood volume (31.8%). For local nodes, infiltration facilities and water storage facilities have different effects. Infiltration facilities significantly reduce runoff of node 47, the reduction rate of ponding time ranges from 73.1% to 54.5%, while water storage facilities have no effects on it. Storage facilities significantly reduce runoff of node 52, the reduction rate of ponding time is 100%, while infiltration facilities have no effects on it. Under all the LID designs, runoff reduction gradually increases with the increasing rainfall amount, and peak reduction becomes stable when rainfall amount reaches about 81.8 mm. In general, the combined model (infiltration + storage) performs better than any other scenarios in runoff reduction. The research shows that LID facilities can greatly mitigate flood, thus the urban flooding disasters caused by extreme rainstorms can be prevented