63 research outputs found
Ferroelectric properties of (1 − x)Bi(Zn1/2Ti1/2)O3–xPbZrO3 ceramics
The (1 − x)Bi(Zn1/2Ti1/2)O3–xPbZrO3 solid solution ceramics were prepared by using solid-state reaction method, and their ferroelectric properties were investigated. It was found that the perovskite structure is stable for compositions with x ≥ 0.900. Within this composition range, the crystal structure of the solid solution preserves the orthorhombic symmetry of PbZrO3 (PZ). The Curie point of the ceramics was found to decrease with increasing Bi(Zn1/2Ti1/2)O3 (BZT) content. The intermediate ferroelectric phase of PZ was stabilized by BZT addition and exists within a much wider temperature range in the solid solution
The morphotropic phase boundary and electrical properties of (1 − x)Pb(Zn1/2W1/2)O3–xPb(Zr0.5Ti0.5)O3 ceramics
Ceramics in the solid solution of (1 − x)Pb(Zn1/2W1/2)O3–xPb(Zr0.5Ti0.5)O3 system, with x = 0.80, 0.85, 0.90, and 0.95, were synthesized with the solid-state reaction technique. The perovskite phase formation in the sintered ceramics was analyzed with X-ray diffraction. It shows that the rhombohedral and the tetragonal phases coexist in the ceramic with x = 0.90, indicating the morphotropic phase boundary (MPB) within this pseudo-binary system. Dielectric and ferroelectric properties measurements indicate that the transition temperature decreases while the remanent polarization increases with the addition of Pb(Zn1/2W1/2)O3. In the composition of x = 0.85 which is close to the MPB in the rhombohedral side, a high piezoelectric property with d 33 = 222 pC/N was observed
The Morphotropic Phase Boundary in the (1-x)PbZrO3–x[0.3Bi(Zn1/2Ti1/2)O3–0.7PbTiO3] Perovskite Solid Solution
Ceramics in the (1-x)PbZrO3–x[0.3Bi(Zn1/2Ti1/2)O3–0.7PbTiO3] solid solution system with 0.48 x 0.56 were investigated. A morphotropic phase boundary separating rhombohedral and tetragonal perovskite phases was identified at x = 0.52. This composition displays the maximum remanent polarization Pr of 40.7 μC/cm2 and the best piezoelectric coefficient d33 of 311 pC/N in the pseudo-binary system. However, the Curie temperature Tc for this MPB composition is 291 °C, much lower than initially expected
Cation, dipole, and spin order in Pb(Fe2/3W1/3)O3-based magnetoelectric multiferroic compounds
Long range 1:1 cation order was developed in Pb(Fe2(1−x)/3Sc2x/3W1/3)O3solid solution compounds by high temperature solid state reaction. It is found that the degree of cation order directly influences the saturation magnetization in these single phase compounds. A high saturation magnetization (∼0.61μB/f.u.) was observed for x=0.15 at 10Kunder 5T. A ferrimagnetic structure was suggested to take into account for the observed magnetic behavior. These compounds also display a saturated electrical polarization of ∼15μC/cm2 at 40kV/cm at 120K
Cation, dipole, and spin order in Pb(Fe2∕3W1∕3)O3-based magnetoelectric multiferroic compounds
Identification of Barium-Site Substitution of BiFeO3-Bi0.5K0.5TiO3 Multiferroic Ceramics: X-ray Absorption Near Edge Spectroscopy
In this work, the effects of barium substitution on the local structure, dielectric and magnetic properties of the polycrystalline ceramics 0.6BiFeO3–0.4(Bi0.5K0.5)TiO3 (0.6BFO–0.4BKT) system was investigated. A solid-state reaction technique was used to synthesize the materials with barium (Ba) doping of 1, 3, 5, 7, and 10 mol%. XRD analysis reveals the coexistence between tetragonal and rhombohedral phases of single-phase perovskite in pure 0.6BFO–0.4BKT and the rhombohedral reach phase was found with increasing Ba content. XANES simulations indicate that the majority of Ba atoms occupy A-site in BKT lattice of Ba-doped 0.6BFO-0.4BKT, the oxidation state of Fe, Ti, and Ba ions are +3, +4 and +2, respectively. At 5 mol% of Ba doping content, the dielectric measurement shows the morphotropic phase boundary (MPB) and the maximum value of ferromagnetic characteristic were observed, indicating an optimum composition, properties and production conditions
Fabrication of Relaxer-Based Piezoelectric Energy Harvesters Using a Sacrificial Poly-Si Seeding Layer
The study of dielectric, pyroelectric and piezoelectric properties on hot pressed PZT-PMN systems
Ferroelectric properties of (1 − x)Bi(Zn1/2Ti1/2)O3–xPbZrO3 ceramics
The (1 − x)Bi(Zn1/2Ti1/2)O3–xPbZrO3 solid solution ceramics were prepared by using solid-state reaction method, and their ferroelectric properties were investigated. It was found that the perovskite structure is stable for compositions with x ≥ 0.900. Within this composition range, the crystal structure of the solid solution preserves the orthorhombic symmetry of PbZrO3 (PZ). The Curie point of the ceramics was found to decrease with increasing Bi(Zn1/2Ti1/2)O3 (BZT) content. The intermediate ferroelectric phase of PZ was stabilized by BZT addition and exists within a much wider temperature range in the solid solution.This is a manuscript from Journal of Materials Science 44 (2009): 4321, doi: 10.1007/s10853-009-3644-z. The final publication is available at Springer via http://dx.doi.org/doi:10.1007/s10853-009-3644-z.</p
Cation, dipole, and spin order in Pb(Fe2/3W1/3)O3-based magnetoelectric multiferroic compounds
Long range 1:1 cation order was developed in Pb(Fe2(1−x)/3Sc2x/3W1/3)O3solid solution compounds by high temperature solid state reaction. It is found that the degree of cation order directly influences the saturation magnetization in these single phase compounds. A high saturation magnetization (∼0.61μB/f.u.) was observed for x=0.15 at 10Kunder 5T. A ferrimagnetic structure was suggested to take into account for the observed magnetic behavior. These compounds also display a saturated electrical polarization of ∼15μC/cm2 at 40kV/cm at 120K.The following article appeared in Applied Physics Letters 90 (2007)" 242905 and may be found at http://dx.doi.org/10.1063/1.2748098.</p
- …