55 research outputs found
Quantum interference induced by multiple Landau-Zener transitions in a strongly driven rf-SQUID qubit
We irradiated an rf-SQUID qubit with large-amplitude and high frequency
electromagnetic field. Population transitions between macroscopic distinctive
quantum states due to Landau-Zener transitions at energy-level avoided
crossings were observed. The qubit population on the excited states as a
function of flux detuning and microwave power exhibits interference patterns.
Some novel features are found in the interference and a model based on rate
equations can well address the features.Comment: 6 pages, 3 figures, comments are welcom
Population inversion induced by Landau--Zener transition in a strongly driven rf superconducting quantum interference device
This is the published version, also available here: http://dx.doi.org/10.1063/1.3093823.Microwave resonances between discrete macroscopically distinct quantum states with single photon and multiphoton absorption are observed in a strongly driven radio frequency superconducting quantum interference device flux qubit. The amplitude of the resonant peaks and dips are modulated by the power of the applied microwave irradiation and a population inversion is generated at low flux bias. These results, which can be addressed with Landau–Zener transition, are useful to develop an alternative means to initialize and manipulate the flux qubit, as well as to do a controllable population inversion used in a micromaser
Population Inversion Induced by Landau-Zener Transition in a Strongly Driven rf-SQUID
Microwave resonances between discrete macroscopically distinct quantum states
with single photon and multiphoton absorption are observed in a strongly driven
radio frequency superconducting quantum interference device flux qubit. The
amplitude of the resonant peaks and dips are modulated by the power of the
applied microwave irradiation and a population inversion is generated at low
flux bias. These results, which can be addressed with Landau-Zener transition,
are useful to develop an alternative means to initialize and manipulate the
flux qubit, as well as to do a controllable population inversion used in a
micromaser.Comment: 4pages, 3 figures; Selected as the cover of the March 9 issue of AP
PS106. Transplantation of Purified CD34+ Cells from Peripheral Blood in Treatment of No-option Critical Limb Ischemia: A Pilot Study
CyclinG1 Amplification Enhances Aurora Kinase Inhibitor-Induced Polyploid Resistance and Inhibition of Bcl-2 Pathway Reverses the Resistance
High-dose clevudine impairs mitochondrial function and glucose-stimulated insulin secretion in INS-1E cells
<p>Abstract</p> <p>Background</p> <p>Clevudine is a nucleoside analog reverse transcriptase inhibitor that exhibits potent antiviral activity against hepatitis B virus (HBV) without serious side effects. However, mitochondrial myopathy has been observed in patients with chronic HBV infection taking clevudine. Moreover, the development of diabetes was recently reported in patients receiving long-term treatment with clevudine. In this study, we investigated the effects of clevudine on mitochondrial function and insulin release in a rat clonal β-cell line, INS-1E.</p> <p>Methods</p> <p>The mitochondrial DNA (mtDNA) copy number and the mRNA levels were measured by using quantitative PCR. MTT analysis, ATP/lactate measurements, and insulin assay were performed.</p> <p>Results</p> <p>Both INS-1E cells and HepG2 cells, which originated from human hepatoma, showed dose-dependent decreases in mtDNA copy number and cytochrome c oxidase-1 (Cox-1) mRNA level following culture with clevudine (10 μM-1 mM) for 4 weeks. INS-1E cells treated with clevudine had reduced total mitochondrial activities, lower cytosolic ATP contents, enhanced lactate production, and more lipid accumulation. Insulin release in response to glucose application was markedly decreased in clevudine-treated INS-1E cells, which might be a consequence of mitochondrial dysfunction.</p> <p>Conclusions</p> <p>Our data suggest that high-dose treatment with clevudine induces mitochondrial defects associated with mtDNA depletion and impairs glucose-stimulated insulin secretion in insulin-releasing cells. These findings partly explain the development of diabetes in patients receiving clevudine who might have a high susceptibility to mitochondrial toxicity.</p
Interfacial Bond-Slip Model for CFRP Plate Externally Bonded to Corroded Steel Plate
The purpose of this study is to establish the interfacial bond-slip model for CFRP plate externally bonded to corroded steel plate. The present bond-slip models for CFRP materials bonded to uncorroded steel plate were first reviewed. Thirty-four double-lap joints were tested to investigate the effect of corrosion duration and adhesive thickness on the bond behavior between CFRP plates and corroded steel plates, and the bond-slip curves for the bonding interface with different adhesive thickness and corrosion duration were obtained combined with the CFRP plate strain distribution data. A new bond-slip model for CFRP plate externally bonded to corroded steel plate was proposed, and the expression of the characteristic parameters, which included the maximum bond resistance τf, the relative slip at the peak bond stress s1, the fitting parameter α, and the interfacial fracture energy Gf, were also developed based on the careful regression analysis of the present data. The influence of the corrosion duration and construction adhesive thickness on the bond-slip relationship were accounted together and expressed as a new parameter; that is, the effective adhesive thickness teff. The comparison between the predicted values and experimental results indicated that the proposed bond-slip model can be applied to reproduce the structural response of the CFRP plate-corroded steel plate double-lap joint with reasonable accuracy. The outcome of this study can provide meaningful references and essential data for the reliable application of CFRP strengthening systems in the performance improvement of corroded steel structures
Three-Dimensional Surface Parameters and Multi-Fractal Spectrum of Corroded Steel.
To study multi-fractal behavior of corroded steel surface, a range of fractal surfaces of corroded surfaces of Q235 steel were constructed by using the Weierstrass-Mandelbrot method under a high total accuracy. The multi-fractal spectrum of fractal surface of corroded steel was calculated to study the multi-fractal characteristics of the W-M corroded surface. Based on the shape feature of the multi-fractal spectrum of corroded steel surface, the least squares method was applied to the quadratic fitting of the multi-fractal spectrum of corroded surface. The fitting function was quantitatively analyzed to simplify the calculation of multi-fractal characteristics of corroded surface. The results showed that the multi-fractal spectrum of corroded surface was fitted well with the method using quadratic curve fitting, and the evolution rules and trends were forecasted accurately. The findings can be applied to research on the mechanisms of corroded surface formation of steel and provide a new approach for the establishment of corrosion damage constitutive models of steel
Three-Dimensional Morphology and Watershed-Algorithm-Based Method for Pitting Corrosion Evaluation
Pitting corrosion and stress concentration at rust pits are the principal reasons for severe degradation in fatigue performance of corroded steel structures. The accurate evaluation of rust pits on rough and uneven corrosion surfaces is the foundation of fatigue life estimation for corroded steel structures. In this paper, a new method for the identification, extraction, and evaluation of rust pits on the surface of corroded steel structures was proposed based on a three-dimensional morphology and watershed algorithm. An accelerated corrosion experiment was first executed to acquire corroded steel plates, and then surface profile measurements were conducted to obtain the three-dimensional morphology of the corroded steel surfaces. Furthermore, the surface topography data of the corroded steel surfaces were written into a gray matrix through coordinate transformation. Then, the gray matrix was successively filtered and gradient-mapped, and the watershed was calculated to obtain the pit mark matrix and pit depth matrix. A calculation method for the size and shape of rust pits was consequently developed, and a statistical analysis of the extraction results of the rust pits was also conducted. The results showed that rust pit density had a peak value at the corrosion duration of 3 months, and rust pit density showed a fluctuating process with corrosion duration that continued to increase until 15 months. The values of the depth diameter ratios of rust pits were concentrated in the range of 0.1~0.8. With corrosion duration increasing from 3 months to 4, 6, 8, 12, and 15 months, the distribution range of the depth diameter ratios of rust pits decreased at first and then increased, followed by decrease and, finally, increase. The width distribution of the rust pits was independent of the depth distribution of the rust pits. The values of the volume ratios were mostly distributed between π/12 and π/4, and the shapes of most rust pits were similar to half (ellipsoidal) spheres
- …