55 research outputs found
A CMOS Spiking Neuron for Dense Memristor-Synapse Connectivity for Brain-Inspired Computing
Neuromorphic systems that densely integrate CMOS spiking neurons and
nano-scale memristor synapses open a new avenue of brain-inspired computing.
Existing silicon neurons have molded neural biophysical dynamics but are
incompatible with memristor synapses, or used extra training circuitry thus
eliminating much of the density advantages gained by using memristors, or were
energy inefficient. Here we describe a novel CMOS spiking leaky
integrate-and-fire neuron circuit. Building on a reconfigurable architecture
with a single opamp, the described neuron accommodates a large number of
memristor synapses, and enables online spike timing dependent plasticity (STDP)
learning with optimized power consumption. Simulation results of an 180nm CMOS
design showed 97% power efficiency metric when realizing STDP learning in
10,000 memristor synapses with a nominal 1M{\Omega} memristance, and only
13{\mu}A current consumption when integrating input spikes. Therefore, the
described CMOS neuron contributes a generalized building block for large-scale
brain-inspired neuromorphic systems.Comment: This is a preprint of an article accepted for publication in
International Joint Conference on Neural Networks (IJCNN) 201
Homogeneous Spiking Neuromorphic System for Real-World Pattern Recognition
A neuromorphic chip that combines CMOS analog spiking neurons and memristive
synapses offers a promising solution to brain-inspired computing, as it can
provide massive neural network parallelism and density. Previous hybrid analog
CMOS-memristor approaches required extensive CMOS circuitry for training, and
thus eliminated most of the density advantages gained by the adoption of
memristor synapses. Further, they used different waveforms for pre and
post-synaptic spikes that added undesirable circuit overhead. Here we describe
a hardware architecture that can feature a large number of memristor synapses
to learn real-world patterns. We present a versatile CMOS neuron that combines
integrate-and-fire behavior, drives passive memristors and implements
competitive learning in a compact circuit module, and enables in-situ
plasticity in the memristor synapses. We demonstrate handwritten-digits
recognition using the proposed architecture using transistor-level circuit
simulations. As the described neuromorphic architecture is homogeneous, it
realizes a fundamental building block for large-scale energy-efficient
brain-inspired silicon chips that could lead to next-generation cognitive
computing.Comment: This is a preprint of an article accepted for publication in IEEE
Journal on Emerging and Selected Topics in Circuits and Systems, vol 5, no.
2, June 201
A CMOS Spiking Neuron for Brain-Inspired Neural Networks with Resistive Synapses and In-Situ Learning
Nanoscale resistive memories are expected to fuel dense integration of
electronic synapses for large-scale neuromorphic system. To realize such a
brain-inspired computing chip, a compact CMOS spiking neuron that performs
in-situ learning and computing while driving a large number of resistive
synapses is desired. This work presents a novel leaky integrate-and-fire neuron
design which implements the dual-mode operation of current integration and
synaptic drive, with a single opamp and enables in-situ learning with crossbar
resistive synapses. The proposed design was implemented in a 0.18 m CMOS
technology. Measurements show neuron's ability to drive a thousand resistive
synapses, and demonstrate an in-situ associative learning. The neuron circuit
occupies a small area of 0.01 mm and has an energy-efficiency of 9.3
pJspikesynapse
Evaluation of Performance of Bus Lanes on Urban Expressway Using Paramics Micro-simulation Model
AbstractUrban expressway, as the main skeleton of the road network, is the aorta between urban regions and urban external traffic communication, but also bears the commuter channel. It makes a large amount of traffic flow into the expressway, resulting the congestion in the expressway in many big cities, including Beijing. Taking the Beijing southwest third ring expressway for example, a simulation model was built using Paramics. The simulation model was pre-evaluated before and after the bus lanes set, and the model was post-evaluated to verify the validity of the model after the bus lanes were implemented, it has important theoretical and practical value
A Comprehensive Design Approach for a MZM Based PAM-4 Silicon Photonic Transmitter
A 4-level pulse amplitude modulation (PAM-4) silicon photonic transmitter targeting operation at 25 Gb/s is designed using an electrical-photonic co-design methodology. The prototype consists of an electrical circuit and a photonics circuit, which were designed in 130 nm IBM SiGe BiCMOS process and 130nm IME SOI CMOS process, respectively. Then the two parts will be interfaced via side-by-side wire bonding. The electrical die mainly includes a 12.5 GHz PLL, a full-rate 4- channel uncorrelated 27 − 1 pseudo-random binary sequence (PRBS) generator and CML drivers. The photonics die is a 2-segment Mach-Zehnder modulator (MZM) silicon photonics device with thermal tuning feature for PAM-4. Verilog-A model for the MZM entails the system simulation for optical devices together with electrical circuitry using custom IC design tools. A full-rate 4-channel uncorrelated PRBS design using transition matrix method is detailed, in which any two of the 4-channels can be used for providing random binary sequence to drive the two segments of the MZM to generate the PAM-4 signal
A CMOS Spiking Neuron for Brain-Inspired Neural Networks with Resistive Synapses and \u3cem\u3eIn-Situ\u3c/em\u3e Learning
Nano-scale resistive memories are expected to fuel dense integration of electronic synapses for large-scale neuromorphic system. To realize such a brain-inspired computing chip, a compact CMOS spiking neuron that performs in-situ learning and computing while driving a large number of resistive synapses is desired. This work presents a novel leaky integrate-and-fire neuron design which implements the dual-mode operation of current integration and synaptic drive, with a single opamp and enables in-situ learning with crossbar resistive synapses. The proposed design was implemented in a 0.18μm CMOS technology. Measurements show neuron’s ability to drive a thousand resistive synapses, and demonstrate an in-situ associative learning. The neuron circuit occupies a small area of 0.01mm2 and has an energy-efficiency of 9.3pJ/spike/synapse
Design Considerations for Traveling-Wave Modulator-Based CMOS Photonic Transmitters
Systematic design and simulation methodology for hybrid optical transmitters that combine CMOS circuits in a 130 nm process, and a traveling-wave Mach-Zehnder modulator (TWMZM) in 130 nm SOI CMOS process, is presented. A compact Verilog-A model for the TWMZM is adopted for the electrooptical simulation. A bond wire model using a high-frequency solver is included for accurate package simulation. Transmitter post-layout simulation result exhibits 5.48 dB extinction ratio, 9.6 ps peak-to-peak jitter, and the best power efficiency of 5.81 pJ/bit when operating up to 12.5 Gb/s non-return-to-zero data. A pulse amplitude modulation 4-level transmitter with detailed linearity design procedure is presented which has horizontal and vertical eye opening of 49 ps and 203 μW when operating at 25 Gb/s, and the power efficiency is 5.09 pJ/bit
Design Analysis of a 12.5 GHz PLL in 130 nm SiGe BiCMOS Process
A systematic design method is applied to study and analyze the loop stability and phase noise of a type-II 3rd-order charge pump PLL. The designed PLL outputs at 12.5 GHz, which is intended to provide a clock for a silicon photonic transmitter prototype. The charge pump current and loop filter resistor are made tunable to cover process and temperature variations. The PLL is designed in a 130 nm SiGe BiCMOS process. The rms jitter of the studied PLL output is about 5 ps with a 97.7 MHz reference clock with 4.9 ps rms jitter from a 0.05 to 12.5 GHz signal generator. The total power consumption of the PLL is less than 175 mW from a 2.5 V power supply
- …