Identification of MicroRNA-like RNAs in Mycelial and yeast phases of the thermal dimorphic fungus Penicillium marneffei

published_or_final_versio

Current status of urban wastewater treatment plants in China

© 2016 Elsevier Ltd. The study reported and analyzed the current state of wastewater treatment plants (WWTPs) in urban China from the perspective of treatment technologies, pollutant removals, operating load and effluent discharge standards. By the end of 2013, 3508 WWTPs have been built in 31 provinces and cities in China with a total treatment capacity of 1.48 × 108 m3/d. The uneven population distribution between China's east and west regions has resulted in notably different economic development outcomes. The technologies mostly used in WWTPs are AAO and oxidation ditch, which account for over 50% of the existing WWTPs. According to statistics, the efficiencies of COD and NH3-N removal are good in 656 WWTPs in 70 cities. The overall average COD removal is over 88% with few regional differences. The average removal efficiency of NH3-N is up to 80%. Large differences exist between the operating loads applied in different WWTPs. The average operating loading rate is approximately 83%, and 52% of WWTPs operate at loadings of <80%, treating up to 40% of the wastewater generated. The implementation of discharge standards has been low. Approximately 28% of WWTPs that achieved the Grade I-A Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant (GB 18918-2002) were constructed after 2010. The sludge treatment and recycling rates are only 25%, and approximately 15% of wastewater is inefficiently treated. Approximately 60% of WWTPs have capacities of 1 × 104 m3/d-5 × 104 m3/d. Relatively high energy consumption is required for small-scale processing, and the utilization rate of recycled wastewater is low. The challenges of WWTPs are discussed with the aim of developing rational criteria and appropriate technologies for water recycling. Suggestions regarding potential technical and administrative measures are provided

An agile vehicle-based dynamic user equilibrium scheme for urban traffic signal control

Traffic Signal Control (TSC) is a fundamental task in modern intelligent transport systems. TSC is often formulated as a bi-level optimization problem, comprised by the signal timing at the upper level and the Dynamic User Equilibrium (DUE) traffic assignment at the lower level. Since DUE is non-convex, existing methods either formulate approximation models or adopt traffic simulators. However, approximation models may oversimplify the practical situations, while traffic simulators are usually time-consuming. This paper formulates a vehicle-based DUE (vDUE) model and proposes an agile method that can simultaneously maintain the computational simplicity and the traffic dynamics for the traffic assignment. Further, an agile TSC system is built by combining the vDUE at the lower level for the traffic assignment with an adaptive differential evolution algorithm at the upper level for the signal timing optimization. To enhance the effectiveness of optimization, the TSC problem formulation is also improved to make it better characterize the practical requirements. In the experiments undertaken, comparisons of different TSC methods are carried out on both real-world and synthetic transportation networks. The experimental results validate the effectiveness of the proposed agile TSC system in various traffic situations

Elastic differential evolution for automatic data clustering

In many practical applications, it is crucial to perform automatic data clustering without knowing the number of clusters in advance. The evolutionary computation paradigm is good at dealing with this task, but the existing algorithms encounter several deficiencies, such as the encoding redundancy and the cross-dimension learning error. In this article, we propose a novel elastic differential evolution algorithm to solve automatic data clustering. Unlike traditional methods, the proposed algorithm considers each clustering layout as a whole and adapts the cluster number and cluster centroids inherently through the variable-length encoding and the evolution operators. The encoding scheme contains no redundancy. To enable the individuals of different lengths to exchange information properly, we develop a subspace crossover and a two-phase mutation operator. The operators employ the basic method of differential evolution and, in addition, they consider the spatial information of cluster layouts to generate offspring solutions. Particularly, each dimension of the parameter vector interacts with its correlated dimensions, which not only adapts the cluster number but also avoids the cross-dimension learning error. The experimental results show that our algorithm outperforms the state-of-the-art algorithms that it is able to identify the correct number of clusters and obtain a good cluster validation value

Cancer-selective, single agent chemoradiosensitising gold nanoparticles

Two nanometre gold nanoparticles (AuNPs), bearing sugar moieties and/or thiol-polyethylene glycol-amine (PEG-amine), were synthesised and evaluated for their in vitro toxicity and ability to radiosensitise cells with 220 kV and 6 MV X-rays, using four cell lines representing normal and cancerous skin and breast tissues. Acute 3 h exposure of cells to AuNPs, bearing PEG-amine only or a 50:50 ratio of alpha-galactose derivative and PEG-amine resulted in selective uptake and toxicity towards cancer cells at unprecedentedly low nanomolar concentrations. Chemotoxicity was prevented by co-administration of N-acetyl cysteine antioxidant, or partially prevented by the caspase inhibitor Z-VAD-FMK. In addition to their intrinsic cancer-selective chemotoxicity, these AuNPs acted as radiosensitisers in combination with 220 kV or 6 MV X-rays. The ability of AuNPs bearing simple ligands to act as cancer-selective chemoradiosensitisers at low concentrations is a novel discovery that holds great promise in developing low-cost cancer nanotherapeutics

Control of magnetic anisotropy by orbital hybridization in (La0.67Sr0.33MnO3)n/(SrTiO3)n superlattice

The asymmetry of chemical nature at the hetero-structural interface offers an unique opportunity to design desirable electronic structure by controlling charge transfer and orbital hybridization across the interface. However, the control of hetero-interface remains a daunting task. Here, we report the modulation of interfacial coupling of (La0.67Sr0.33MnO3)n/(SrTiO3)n superlattices by manipulating the periodic thickness with n unit cells of SrTiO3 and n unit cells La0.67Sr0.33MnO3. The easy axis of magnetic anisotropy rotates from in-plane (n = 10) to out-of-plane (n = 2) orientation at 150 K. Transmission electron microscopy reveals enlarged tetragonal ratio > 1 with breaking of volume conservation around the (La0.67Sr0.33MnO3)n/(SrTiO3)n interface, and electronic charge transfer from Mn to Ti 3d orbitals across the interface. Orbital hybridization accompanying the charge transfer results in preferred occupancy of 3d3z2-r2 orbital at the interface, which induces a stronger electronic hopping integral along the out-of-plane direction and corresponding out-of-plane magnetic easy axis for n = 2. We demonstrate that interfacial orbital hybridization in superlattices of strongly correlated oxides may be a promising approach to tailor electronic and magnetic properties in device applications

Zika Virus Infection in Dexamethasone-immunosuppressed Mice Demonstrating Disseminated Infection with Multi-organ Involvement Including Orchitis Effectively Treated by Recombinant Type I Interferons

published_or_final_versio