Health monitoring of federated future internet experimentation facilities

The federation of Future Internet testbeds as envisaged by the Fed4FIRE project is a complex undertaking. It combines a large number of existing, independent testbeds in a single federation, and presents them to the experimenter as if it were a single infrastructure. Operating and using such an infrastructure requires a profound knowledge of the status of the health of the underlying independent systems. Inspired by network monitoring techniques used to operate the Internet today, this paper considers how a centralized health monitoring system can be set up in a federated environment of Future Internet Experimentation Facilities. We show why it is a vital tool for experimenters and First Level Support in the federation, which health monitoring information must be captured, and how this information can be displayed most appropriately

Image Enhancement through Square Illumination Shaping

Optical imaging is traditionally carried out using circular pupils, assuring the absence of orientation dependency. In the case of IC microlithography however, such dependency exists and is generally limited to orthogonal axes. We have previously reported the potential improvement to lithographic imaging through the use of a square character to an illumination pupil using fully open pupils, square rings, and slot shapes. In this paper we show lithographic results for this shaping at 193nm using a full field (ASML) imaging tool. Results show improvement in both DOF and exposure latitude over conventional circular shaping, leading to the consideration of this approach as a manufacturable method of resolution enhancement

NEMA NU 2-2007 performance characteristics of GE Signa integrated PET/MR for different PET isotopes

BackgroundFully integrated PET/MR systems are being used frequently in clinical research and routine. National Electrical Manufacturers Association (NEMA) characterization of these systems is generally done with F-18 which is clinically the most relevant PET isotope. However, other PET isotopes, such as Ga-68 and Y-90, are gaining clinical importance as they are of specific interest for oncological applications and for follow-up of Y-90-based radionuclide therapy. These isotopes have a complex decay scheme with a variety of prompt gammas in coincidence. Ga-68 and Y-90 have higher positron energy and, because of the larger positron range, there may be interference with the magnetic field of the MR compared to F-18. Therefore, it is relevant to determine the performance of PET/MR for these clinically relevant and commercially available isotopes.MethodsNEMA NU 2-2007 performance measurements were performed for characterizing the spatial resolution, sensitivity, image quality, and the accuracy of attenuation and scatter corrections for F-18, Ga-68, and Y-90. Scatter fraction and noise equivalent count rate (NECR) tests were performed using F-18 and Ga-68. All phantom data were acquired on the GE Signa integrated PET/MR system, installed in UZ Leuven, Belgium.Results(18)F, Ga-68, and Y-90 NEMA performance tests resulted in substantially different system characteristics. In comparison with F-18, the spatial resolution is about 1mm larger in the axial direction for Ga-68 and no significative effect was found for Y-90. The impact of this lower resolution is also visible in the recovery coefficients of the smallest spheres of Ga-68 in image quality measurements, where clearly lower values are obtained. For Y-90, the low number of counts leads to a large variability in the image quality measurements. The primary factor for the sensitivity change is the scale factor related to the positron emission fraction. There is also an impact on the peak NECR, which is lower for Ga-68 than for F-18 and appears at higher activities.ConclusionsThe system performance of GE Signa integrated PET/MR was substantially different, in terms of NEMA spatial resolution, image quality, and NECR for Ga-68 and Y-90 compared to F-18. But these differences are compensated by the PET/MR scanner technologies and reconstructions methods

Generalized phonon-assisted Zener tunneling in indirect semiconductors with non-uniform electric fields : a rigorous approach

A general framework to calculate the Zener current in an indirect semiconductor with an externally applied potential is provided. Assuming a parabolic valence and conduction band dispersion, the semiconductor is in equilibrium in the presence of the external field as long as the electronphonon interaction is absent. The linear response to the electron-phonon interaction results in a non-equilibrium system. The Zener tunneling current is calculated from the number of electrons making the transition from valence to conduction band per unit time. A convenient expression based on the single particle spectral functions is provided, enabling the numerical calculation of the Zener current under any three-dimensional potential profile. For a one dimensional potential profile an analytical expression is obtained for the current in a bulk semiconductor, a semiconductor under uniform field and a semiconductor under a non-uniform field using the WKB (Wentzel-Kramers-Brillouin) approximation. The obtained results agree with the Kane result in the low field limit. A numerical example for abrupt p - n diodes with different doping concentrations is given, from which it can be seen that the uniform field model is a better approximation than the WKB model but a direct numerical treatment is required for low bias conditions.Comment: 29 pages, 7 figure

Gray Assist Bar OPC

Assist bar Optical Proximity Correction (OPC) has been demonstrated to increase across pitch performance and depth-of- focus of semi-dense to isolated lines1. As the sub-resolution assist feature (SRAF) or assist bar’s size increases, so does its desired lithographic effect, as well as its undesired printability. In other words, when large assist features are required at isolated pitches, the assist features may print. A frequency-preserving assist bar solution is the most preferred one, but difficult to realize for opaque assist features due to printability. The concept of frequency-preserving Gray Assist Bar OPC has been introduced as a method to extend imaging performance for small features across a wide rage of duty ratios3. In this paper, we will present the experimental validation of this concept. The Gray Assist Bar mask was manufactured using a two-level lithography process, and the optical properties have been characterized using a Woollam VUV VASE system. Additional metrology was performed using an AFM (SNP9000) and CD SEM (KLA8250XR). Exposures on a 0.75NA 193nm scanner clearly show the expected effects. The use of the Gray Assist Bar features reduces the through pitch critical dimension (CD) variations significantly and can hence be regarded as an ‘Optical Proximity Correction’. The isofocal inflection point of aerial images is shifted in cases with Gray Assist Bars, resulting in flatter bossung curves and a larger depth of focus (DOF) for the various features through pitch at their target size. This results in larger overlapping process windows. The Gray Assist Bars has also shown a very low printability, even with aggressive off-axis illumination (OAI) settings

The implications of K-Ar glauconite dating of the Diest Formation on the paleogeography of the Upper Miocene in Belgium

The glauconite-rich Diest Formation in central and north Belgium contains sands in the Campine subsurface and the hilly Hageland area that can be distinguished from each other. The Hageland Diest Sands member contains no stratigraphically relevant fossils while in the Campine subsurface dinoflagellate cysts are common and show a stratigraphic range covering the entire Tortonian stage. K-Ar dates were determined for glauconite from 13 selected samples spread over both areas. A glauconite date corresponding to the earliest Tortonian indicates newly formed glauconite was incorporated into a greensand at the base of the Diest Formation in the central Campine area. All other dates point at reworked glauconite and can be organized in two groups, one reflecting a Burdigalian age and another reflecting a Langhian age. These data and the thickness and glauconite content of the Diest Formation imply massive reworking of older Miocene deposits. The paleogeographic implications of these data lead to the tentative recognition of two Tortonian sedimentary sequences. An older one corresponding to dinoflagellate biochron DN8 comprises the Deurne Member, part of the Dessel Member, the Hageland Diest member, the eastern Campine Diest member and some basal sands of the Diest Formation in the central Campine. A younger sequence corresponding to dinoilagellate biochrons DN9 and 10 was strongly influenced by the prograding proto-Rhine delta front in the Roer Valley Graben to the northeast. The subsiding Campine basin was filled from east to west during this second cycle

Calibration of the modified Bartlett-Lewis model using global optimization techniques and alternative objective functions

The calibration of stochastic point process rainfall models, such as of the Bartlett-Lewis type, suffers from the presence of multiple local minima which local search algorithms usually fail to avoid. To meet this shortcoming, four relatively new global optimization methods are presented and tested for their ability to calibrate the Modified Bartlett-Lewis Model. The list of tested methods consists of: the Downhill Simplex Method, Simplex-Simulated Annealing, Particle Swarm Optimization and Shuffled Complex Evolution. The parameters of these algorithms are first optimized to ensure optimal performance, after which they are used for calibration of the Modified Bartlett-Lewis model. Furthermore, this paper addresses the choice of weights in the objective function. Three alternative weighing methods are compared to determine whether or not simulation results (obtained after calibration with the best optimization method) are influenced by the choice of weights

Quantum Detection with Unknown States

We address the problem of distinguishing among a finite collection of quantum states, when the states are not entirely known. For completely specified states, necessary and sufficient conditions on a quantum measurement minimizing the probability of a detection error have been derived. In this work, we assume that each of the states in our collection is a mixture of a known state and an unknown state. We investigate two criteria for optimality. The first is minimization of the worst-case probability of a detection error. For the second we assume a probability distribution on the unknown states, and minimize of the expected probability of a detection error. We find that under both criteria, the optimal detectors are equivalent to the optimal detectors of an ``effective ensemble''. In the worst-case, the effective ensemble is comprised of the known states with altered prior probabilities, and in the average case it is made up of altered states with the original prior probabilities.Comment: Refereed version. Improved numerical examples and figures. A few typos fixe

Optimal Unravellings for Feedback Control in Linear Quantum Systems

For quantum systems with linear dynamics in phase space much of classical feedback control theory applies. However, there are some questions that are sensible only for the quantum case, such as: given a fixed interaction between the system and the environment what is the optimal measurement on the environment for a particular control problem? We show that for a broad class of optimal (state-based) control problems (the stationary Linear-Quadratic-Gaussian class), this question is a semi-definite program. Moreover, the answer also applies to Markovian (current-based) feedback.Comment: 5 pages. Version published by Phys. Rev. Let