3,966 research outputs found
Preparation of Nanocomposites from Styrene and Modified Graphite Oxides
Graphite oxide was prepared and modified with several ammonium salts and these modified graphite oxides were used to prepare nanocomposites with polystyrene by in situ polymerization of styrene monomer and by melt blending with polystyrene. Nanocomposites were characterized by X-ray diffraction, cone calorimetry, thermogravimetric analysis and the evaluation of mechanical properties. Nanocomposites are formed by in situ polymerization but not by melt blending; the graphite oxide undergoes thermal degradation at the temperature of melt blending so nanocomposite formation would be unlikely. Mechanical properties of the melt blended nanocomposites are improved relative to the virgin polystyrene while those prepared by in situ polymerization are decreased, except in the case of Young\u27s Modulus, where melt blended and in situ polymerized materials show similar results
Polystyrene/Graphite Nanocomposites: Effect on Thermal Stability
Nanocomposites consisting of polymer and clay have been shown to exhibit a significant reduction in flammability and an increase in mechanical properties. This work examines the effect of thermal stability and mechanical properties of nanocomposites prepared from potassium graphite and styrene. Synthesis of nanocomposites was accomplished by using potassium graphite (KC8) as the initiator in the polymerization of styrene. A slight increase in thermal stability is observed but mechanical properties are decreased
Polybutadiene Cross-Linked With Various Diols – Effect On Thermal Stability
The relationship between cross-linking and thermal stability as related to polybutadiene is the focus of current research. Cross-linked polybutadienes have been prepared using various diols as the cross-linking agent. Cross-linked polymers have been characterized by gel content, swelling ratios, infrared spectroscopy, and thermal analysis. These polymers are not highly cross-linked, as seen by gel content and swelling ratios, and cross-linking does not have a large effect on the onset temperature of the degradation. Nonetheless, extensive formation of a non-volatile residue occurs
Detection of fixed points in spatiotemporal signals by clustering method
We present a method to determine fixed points in spatiotemporal signals. A
144-dimensioanl simulated signal, similar to a Kueppers-Lortz instability, is
analyzed and its fixed points are reconstructed.Comment: 3 pages, 3 figure
Determination of the universality class of crystal plasticity
Although scaling phenomena have long been documented in crystalline
plasticity, the universality class has been difficult to identify due to the
rarity of avalanche events, which require large system sizes and long times in
order to accurately measure scaling exponents and functions. Here we present
comprehensive simulations of two-dimensional dislocation dynamics under shear,
using finite-size scaling to extract scaling exponents and the avalanche
profile scaling function from time-resolved measurements of slip-avalanches.
Our results provide compelling evidence that both the static and dynamic
universality classes are consistent with the mean-field interface depinning
model.Comment: 6 pages, 4 figures. Figure 4 inset has been corrected as compared to
the EPL publication. We thank Michael Zaiser for bringing its incorrect
caption to our attention. The correction leaves all results unaffecte
Expandable Graphite/Polyamide-6 Nanocomposites
Polyamide-6 (PA-6)/graphite nanocomposites were prepared by melt blending, using a variety of graphites, including virgin graphite, expandable graphites and expanded graphite. The resulting nanocomposites were characterized by X-ray diffraction, thermogravimetric analysis, cone calorimetry, and tensile mechanical analysis. Nanocomposite formation does occur, as denoted by the nanometre dispersion of graphite layers in the polymer matrix, and the dispersion depends on the graphite treatment. The material properties of the resulting composites are improved relative to the virgin/unfilled polymer; in particular, there is an enhancement of the thermal stability without any significant deterioration of the mechanical properties
Triple correlation for detection of damage-related nonlinearities in composite structures
Nonlinear effects in vibration responses are investigated for the undamaged composite plate and the composite plate with a delamination. The analysis is focused on higher harmonic generation in vibration responses for various excitation amplitude levels. This effect is investigated using the triple correlation technique. The dynamics of composite plate was modelled using two-dimensional finite elements and the classical lamination theory. The doubled-node approach was used to model delamination area. Mode shapes and natural frequencies were estimated based on numerical models. Next, the delamination divergence analysis was used to obtain relative displacements for delaminated plies. Experimental modal analysis test was carried out to verify the numerical models. The two strongest vibration modes as well as two vibration modes with the smallest and largest motion level of delaminated plies were selected for nonlinear vibration test. The Fisher criterion was employed to verify the effectiveness and confidence level of the proposed technique. The results show that the method can be used not only to reveal nonlinearities, but also to reliably detect impact damage in composites. These results are confirmed using the statistical analysis
- …