1,756 research outputs found
Measurements of 12 C ion fragmentation on thin carbon target from the FIRST collaboration at GSI
The FIRST (Fragmentation of Ions Relevant for Space and Therapy) experiment
at GSI laboratory took data in summer 2011, studying the collisions of a 12C ion beam with
Carbon and Au thin targets. The experiment main purpose is the double dierential cross
section measurement of the carbon ion fragmentation at energies that are relevant both for
tumor therapy and space radiation protection applications (100-1000 MeV/u). The FIRST
dataset contains carbon ions collisions on a 3.43 gcm2
carbon target (about 24 M events) and
on a 0.96 gcm2 Au target (about 4.5 M events). The SIS (heavy ion synchrotron) was used
to accelerate the 12C ions at the energy of 400 MeV/u. The preliminary results of dierential
cross sections measurements as a function of angle and energy for carbon target, in the small
angle region ( < 5), are presente
BCI-assisted training for upper limb motor rehabilitation: estimation of effects on individual brain connectivity and motor functions
The aim of the study is to quantify individual changes in scalp connectivity patterns associated to the affected hand movement in stroke patients after a 1-month training based on BCIsupported motor imagery to improve upper limb motor recovery. To perform the statistical evaluation between pre- and post-training conditions at the single subject level, a resampling approach was applied to EEG datasets acquired from 12 stroke patients during the execution of a motor task with the stroke affected hand before and after the rehabilitative intervention. Significant patterns of the network reinforced after the training were extracted and a significant correlation was found between indices related to the reinforced pattern and the clinical outcome indicated by clinical scales
Self-adapting double and triple-lift absorption cycles for low-grade heat driven cooling
Multiple-lift absorption cycles are an interesting option for cooling and refrigeration driven by waste or renewable heat. Compared with single effect cycles, they allow higher thermal lift or lower thrust, but they often require the use of controlled valves, which can cause stability and control issues. The self-adapting concept, firstly introduced in the two-pump series-flow double-lift cycle, replaces the valve with a phase separator, overcoming this drawback. In this work, five new cycle layouts, incorporating the self-adapting concept, are presented: the one-pump series-flow double-lift cycle and four triple-lift cycles. The cycles are compared in terms of COP and heat duties under various conditions, using NH3–H2O and NH3–LiNO3 as working pairs. It is found that the double-lift cycles have a COP in the range 0.35–0.20, about 0.1 higher than the triple-lift cycles. However, triple-lift cycles accept cooling water temperature up to 8 °C higher. Cycles with multiple pumps have higher efficiency than single-pump cycles, especially at high lift conditions. The use of NH3–H2O as working pair guarantees higher COP at low thermal lift, while NH3–LiNO3 has wider operating range and better performances at high thermal lift
Modelling of a falling-film evaporator for adsorption chillers.
The objective of the present study was to develop a dynamic model to simulate a prototype falling-film evap-orator that is part of a single-bed adsorption chiller test bench located at the Department of Energy of the Politecnico di Milano. The model is based on the evaporator energy and mass balances and was calibrated and validated using experimental data coming from realistic operating conditions in a range of inlet chilled water temperatures (Tin,chw) from 15 to 25 °C. From the experimental data, it was obtained that the average overall heat transfer conductance (UA) was approximately 530 W/K for all temperatures during the quasi steady-state section of the process. A correlation to calculate the wetted surface through a variable called wettability factor (fwet) was developed from experimental data. The fwet factors were identified using the model and were in the range of 0.80 - 0.20 (Tin,chw= 15 °C) and 0.60 - 0.20 (Tin,chw= 25 °C). It was seen that, the higher the Tin,chw, the lower the fwet values. The UA and saturation temperature (Tref,sat) values from the model were in good accordance with experimental data during the quasi steady-state section of the process. Nevertheless, the final transition stage (i. e., a situation in which the evaporator's refrigerant pool is empty) required an additional hypothesis due to the uncertain process' dynamics. The mass and energy balances that are part of the hydrodynamics and heat transfer sections of the model use Nusselt's classic theory for falling-film
Development of a gas absorption heat pump for residential applications
Thermally Driven Heat Pumps represent an option to reduce the energy consumption for space heating and
domestic hot water in hard-to-decarbonize buildings without impacting the electrical grid and utilizing the
current and future gaseous energy vectors with high efficiency. Ariston Group and Politecnico di Milano
developed a gas absorption heat pump for the residential market, exploiting design and manufacturing solutions to enable large-scale production and introducing technical features to assure high performance over the entire working range.
In particular, the use of a variable restrictor setup coupled with a patented solution, called “booster”, can reduce the temperature of the generator at high load and high lift conditions, enabling the heat pump to provide the nominal capacity from -22 °C to +40 °C of outdoor air temperature, with supply temperature up to 70 °C.
Moreover, coupled with a specifically designed combustion system, the heat pump can modulate at 1:6 ratio
of its nominal capacity. This feature makes it possible to maintain high efficiency also at part load conditions,
avoiding the on-off operation and making redundant the installation of inertial buffer.
Additionally, an innovative strategy to perform the defrosting of the air-sourced heat exchanger without the
need of acting on the thermodynamic cycle has been developed. This allows defrosting operations extremely
fast, while offering an almost negligible effect on the heat pump performance and substantially no interruption to the heating service and contributing to the elimination of the need to install an inertial buffer.
The thermodynamic core of the appliance was built targeting large scale production. It allows for high specific
capacity (kg/kW) and a small footprint (m2/kW) with the ability to serve nominal capacities ranging from 8 to
15 kW based on the configurations. Laboratory test to assess the performances based on the European Standard
EN 12309 returned a seasonal gas utilization efficiency on the net calorific of 1.50, a seasonal primary energy
ratio of 1.27, and extremely low electrical consumption for the auxiliaries
A novel approach to measure brain-to-brain spatial and temporal alignment during positive empathy
: Empathy is defined as the ability to vicariously experience others' suffering (vicarious pain) or feeling their joy (vicarious reward). While most neuroimaging studies have focused on vicarious pain and describe similar neural responses during the observed and the personal negative affective involvement, only initial evidence has been reported for the neural responses to others' rewards and positive empathy. Here, we propose a novel approach, based on the simultaneous recording of multi-subject EEG signals and exploiting the wavelet coherence decomposition to measure the temporal alignment between ERPs in a dyad of interacting subjects. We used the Third-Party Punishment (TPP) paradigm to elicit the personal and vicarious experiences. During a positive experience, we observed the simultaneous presence in both agents of the Late Positive Potential (LPP), an ERP component related to emotion processing, as well as the existence of an inter-subject ERPs synchronization in the related time window. Moreover, the amplitude of the LPP synchronization was modulated by the presence of a human-agent. Finally, the localized brain circuits subtending the ERP-synchronization correspond to key-regions of personal and vicarious reward. Our findings suggest that the temporal and spatial ERPs alignment might be a novel and direct proxy measure of empathy
Multiple-Brain connectivity during third party punishment: an EEG hyperscanning study
Compassion is a particular form of empathic reaction to harm that befalls others and is accompanied by a desire to alleviate their suffering. This altruistic behavior is often manifested through altruistic punishment, wherein individuals penalize a deprecated human's actions, even if they are directed toward strangers. By adopting a dual approach, we provide empirical evidence that compassion is a multifaceted prosocial behavior and can predict altruistic punishment. In particular, in this multiple-brain connectivity study in an EEG hyperscanning setting, compassion was examined during real-time social interactions in a third-party punishment (TPP) experiment. We observed that specific connectivity patterns were linked to behavioral and psychological intra- and interpersonal factors. Thus, our results suggest that an ecological approach based on simultaneous dual-scanning and multiple-brain connectivity is suitable for analyzing complex social phenomena
Testing of an adsorption chiller prototype for data center cooling.
The main objective of this study is to present a novel adsorption chiller prototype (designed and realized by the company Sorption Technologies GmbH) that is suitable for cooling of data center servers. This prototype has been designed to fit into commercially-available data center racks. This adsorption prototype has been designed to cool down the rack servers by means of liquid cooling. Furthermore, an air-cooler heat exchanger is also integrated into the adsorption machine to cool down the rest of the rack components (i.e., patch panels, HDD).
This way, the adsorption system is able to cool down all rack components. Phase-change chambers are integrated into the adsorption modules for direct evaporation/condensation, removing the need of large vacuum valves and allowing to have a more simpler and compact vacuum system. This also means that the refrigerant distribution is completely done in liquid phase. The prototype is installed at the Department of Energy at the Politecnico di Milano and testing will be carried out using cooling water temperatures in the range 25 – 30 °C and hot water temperatures in the range 55 – 65 °C
Eukaryotic and prokaryotic phytochelatin synthases differ less in functional terms than previously thought: a comparative analysis of Marchantia polymorpha and Geitlerinema sp. PCC 7407
This paper reports functional studies on the enzyme phytochelatin synthase in the liverwortMarchantia polymorphaand the cyanobacteriumGeitlerinemasp. strain PCC 7407. In vitro activity assays in control samples (cadmium-untreated) showed that phytochelatin synthase was constitutively expressed in both organisms. In the presence of 100 mu M cadmium, in both the liverwort and the cyanobacterium, the enzyme was promptly activated in vitro, and produced phytochelatins up to the oligomer PC4. Likewise,in vivoexposure to 10-36 mu M cadmium for 6-120 h induced in both organisms phytochelatin synthesis up to PC4. Furthermore, the glutathione (GSH) levels inM. polymorphawere constitutively low (compared with the average content in higher plants), but increased considerably under cadmium stress. Conversely, the GSH levels inGeitlerinemasp. PCC 7407 were constitutively high, but were halved under metal treatments. At odds with former papers, our results demonstrate that, as inM. polymorphaand other plants, the cyanobacterial phytochelatin synthase exposed to cadmium possesses manifest transpeptidasic activity, being able to synthesize phytochelatins with a degree of oligomerization higher than PC2. Therefore, prokaryotic and eukaryotic phytochelatin synthases differ less in functional terms than previously thought
Scintillating fiber devices for particle therapy applications
Particle Therapy (PT) is a radiation therapy technique in which solid tumors are treated with charged ions and exploits the achievable highly localized dose delivery, allowing to spare healthy tissues and organs at risk. The development of a range monitoring technique to be used on-line, during the treatment, capable to reach millimetric precision is considered one of the important steps towards an optimization of the PT efficacy and of the treatment quality. To this aim, charged secondary particles produced in the nuclear interactions between the beam particles and the patient tissues can be exploited. Besides charged secondaries, also neutrons are produced in nuclear interactions. The secondary neutron component might cause an undesired and not negligible dose deposition far away from the tumor region, enhancing the risk of secondary malignant neoplasms that can develop even years after the treatment. An accurate neutron characterization (flux, energy and emission profile) is hence needed for a better evaluation of long-term complications. In this contribution two tracker detectors, both based on scintillating fibers, are presented. The first one, named Dose Profiler (DP), is planned to be used as a beam range monitor in PT treatments with heavy ion beams, exploiting the charged secondary fragments production. The DP is currently under development within the INSIDE (Innovative Solutions for In-beam DosimEtry in hadrontherapy) project. The second one is dedicated to the measurement of the fast and ultrafast neutron component produced in PT treatments, in the framework of the MONDO (MOnitor for Neutron Dose in hadrOntherapy) project. Results of the first calibration tests performed at the Trento Protontherapy center and at CNAO (Italy) are reported, as well as simulation studies
- …