5,242 research outputs found
Laboratory discharge studies of a 6 V alkaline lantern-type battery Eveready Energizer no. 528, under various ambient temperatures (-15 deg C and + 22 deg C) and loads (30 omega and 60 omega)
The voltages of two Eveready No. 528 batteries, one the test battery, the other the control battery, were simultaneously recorded as they were discharged across 30 omega loads using a dual chart recorder. The test battery was initially put in a freezer at -15 + or - 3 C. After its voltage had fallen to .6 V, it was brought back out into the room at 22 + or - 3 C. A second run was made with 60 omega loads. Assuming a 3.0 V cut-off, the total energy output of the test battery at -15 C was 26 WHr 30 omega and 35 WHr 60 omega, and the corresponding numbers for the control battery at 22 C were 91 WHr and 100 WHr. When the test battery was subsequently allowed to warm up, the voltage rose above 4 V and the total energy output rose to 80 WHr 30 omega and 82 WHR 60 omega
Impact and collisional processes in the solar system
The mechanical and thermodynamic aspects of shock impact cratering and accretionary processes on solid planets and satellites are being investigated experimentally. The recently proposed model of Melosh, describing the physics controlling the size and velocity of only lightly shocked spalled ejecta surrounding the crushed rock region of an impact crater, was studied at the Ames gun facility. Spall velocity measurements using lead and aluminum bullets were conducted. In addition, shock temperatures of silicates and volatile-bearing minerals were measured using radiative techniques. Finally impact devolatilization of minerals and accretion of planetary atmospheres were examined. Measurements of the release isentropes of CaCO3 were carried out. The effect on the water budgets of planets of reactions which occur when metallic iron (which would be present in chondritic material) is introduced into a simple accretion model is under investigation
Proposed Earth based cratering experiments at low G in hard vacuum
In order to address the question of whether the cratering scale which was developed can be extrapolated to low velocity (of planetesimals appropriate for conditions during accretion of the planets and the impact mechanics of encounters of both asteroids and the solid objects which comprise the rings of the outer major planets), a series of experiments at low gravity and at high vacuum are proposed. Specific issues which could be addressed include: the effect of very low gravity on cratering efficiency and final crater shape; and the dynamics of impact into a strengthless spherical and ellipsoidal liquid target
Penetration depth time history measurement method
A new method for measuring the depth time history of rigid body penetration into brittle materials under a deceleration of ~10^5 g. The method includes: sabot-projectile, sabot-projectile separation and penetration depth detection systems. Relatively small intrinsic time error (3%) and depth error (0.3–0.7 mm) results. Penetration depth time history in a series of 4140 steel projectile penetrations into a mortar are measured at velocities of 100 to 500 m/sec with sufficient accuracy such that differentiation with respect to time yields stopping force, via Newton's second law
Impact of an asteroid or comet in the ocean and extinction of terrestrial life
Finite difference calculations describing the impact mechanics associated with a 10 to 30 km diameter silicate or water object impacting a 5 km deep ocean overlying a silicate solid planet demonstrate that from 12 to 15% of the bolide energy resides in the water. It is speculated that minimal global tsunami run-up heights on the continents would be 300-400 meters, and that such waves would inundate all low altitude continental areas, and strip and silt-over virtually all vegetation. As a result the terrestrial animal food chain would be seriously perturbed. This could in turn cause extinction of large terrestrial animals
Shock wave propagation in porous ice
We present data on shock wave propagation in porous ice under conditions applicable to the outer solar system. The equation of state of porous ice under low temperature and low pressure conditions agrees well with measurements under terrestrial conditions implying that data on terrestrial snow may be applicable to the outer solar system. We also observe rarefaction waves from small regions of increased porosity and calculate release wave velocities
Numerical Modeling of Shock-Induced Damage for Granite under Dynamic Loading
Johnson-Holmquist constitutive model for brittle materials, coupled with a crack softening model, is used to describe the deviatoric and tensile crack propagation beneath impact crater in granite. Model constants are determined either directly from static uniaxial strain loading experiments, or indirectly from numerical adjustment. Constants are put into AUTODYN-2D from Century Dynamics to simulate the shock-induced damage in granite targets impacted by projectiles at different velocities. The agreement between experimental data and simulated results is encouraging. Instead of traditional grid-based methods, a Smooth Particle Hydrodynamics solver is used to define damaged regions in brittle media
A sensitive optical pyrometer for shock-temperature measurements
A new optical system was used to determine temperatures above 2400 K in shocked materials by measuring the spectral radiance of sub-microsecond pulses of light emitted from initially transparent solid samples in the visible and near infrared (450 to 900 nm). The high sensitivity of this optical pyrometer is attributed to the small number of channels, large aperture (0.03 steradian), the large bandwidth per channel (40 nm), and large photodiode detection area (0.2 sq cm). Improved calibration techniques reduce systematic errors encountered in previous shock-temperature experiments
Impact and explosion crater ejecta, fragment size, and velocity
A model was developed for the mass distribution of fragments that are ejected at a given velocity for impact and explosion craters. The model is semi-empirical in nature and is derived from (1) numerical calculations of cratering and the resultant mass versus ejection velocity, (2) observed ejecta blanket particle size distributions, (3) an empirical relationship between maximum ejecta fragment size and crater diameter and an assumption on the functional form for the distribution of fragements ejected at a given velocity. This model implies that for planetary impacts into competent rock, the distribution of fragments ejected at a given velocity are nearly monodisperse, e.g., 20% of the mass of the ejecta at a given velocity contain fragments having a mass less than 0.1 times a mass of the largest fragment moving at that velocity. Using this model, the largest fragment that can be ejected from asteroids, the moon, Mars, and Earth is calculated as a function of crater diameter. In addition, the internal energy of ejecta versus ejecta velocity is found. The internal energy of fragments having velocities exceeding the escape velocity of the moon will exceed the energy required for incipient melting for solid silicates and thus, constrains the maximum ejected solid fragment size
The North Carolina A and T State University Student Space Shuttle Program
Inspired into being in 1979 by the late astronaut, Dr. Ronald McNair, the primary goal of this student centered program is to perform two experiments, Arthopod Development Study and Crystal Growth Study. Since 1979, 78 different students representing 12 majors have participated in every phase of development of the payload -- from coming up with the original ideas to final fabrication and testing. Students have also been involved in many extra activities such as presenting their results at annual meetings and hosting tours of our lab for local schools. The program has received extensive outside support in the form of funds, technical assistance and donated parts. The payload, made primarily out of aluminum, consists of a central column structure, a battery box, a crystal growth box, an arthropod development box, four control circuit boxes, and a thermograph box. The battery box contains 24, Eveready 6V, Alkaline batteries. The thermograph box contains 3 Ryan TempMentors. Fabrication of the payload is essentially complete and a complete testing program has been initiated
- …