Microscopic Description of Band Structure at Very Extended Shapes in the A ~ 110 Mass Region

Recent experiments have confirmed the existence of rotational bands in the A \~ 110 mass region with very extended shapes lying between super- and hyper-deformation. Using the projected shell model, we make a first attempt to describe quantitatively such a band structure in 108Cd. Excellent agreement is achieved in the dynamic moment of inertia J(2) calculation. This allows us to suggest the spin values for the energy levels, which are experimentally unknown. It is found that at this large deformation, the sharply down-sloping orbitals in the proton i_{13/2} subshell are responsible for the irregularity in the experimental J(2), and the wave functions of the observed states have a dominant component of two-quasiparticles from these orbitals. Measurement of transition quadrupole moments and g-factors will test these findings, and thus can provide a deeper understanding of the band structure at very extended shapes.Comment: 4 pages, 3 eps figures, final version accepted by Phys. Rev. C as a Rapid Communicatio

A CMOS 100 MHz continuous-time seventh order 0.05° equiripple linear phase leapfrog multiple loop feedback Gm-C filter

“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”A novel 100 MHz CMOS Gm-C seventh-order 0.05° equiripple linear phase low-pass multiple loop feedback (MLF) filter based on leapfrog (LF) topology is presented. The filter is implemented using a fully-differential linear, high performance operational transconductance amplifier (OTA) based on cross-coupled pairs. PSpice simulations in a standard TSMC 0.25 μm CMOS process and with a single 5 V power supply have shown that the cut-off frequency of the filter without and with gain boost ranges from 8-32 MHz and 15-100 MHz, respectively. With gain boost, total harmonic distortion (THD) for a differential input voltage Vid of 315 mVpp at 1 MHz is less than -40 dB, dynamic range at 1% THD is over 55 dB, output noise with bandwidth 500 MHz is only 300 μVRMS, and power consumption is 322 mW

Self-organizing peer-to-peer social networks

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2008 The Authors.Peer-to-peer (P2P) systems provide a new solution to distributed information and resource sharing because of its outstanding properties in decentralization, dynamics, flexibility, autonomy, and cooperation, summarized as DDFAC in this paper. After a detailed analysis of the current P2P literature, this paper suggests to better exploit peer social relationships and peer autonomy to achieve efficient P2P structure design. Accordingly, this paper proposes Self-organizing peer-to-peer social networks (SoPPSoNs) to self-organize distributed peers in a decentralized way, in which neuron-like agents following extended Hebbian rules found in the brain activity represent peers to discover useful peer connections. The self-organized networks capture social associations of peers in resource sharing, and hence are called P2P social networks. SoPPSoNs have improved search speed and success rate as peer social networks are correctly formed. This has been verified through tests on real data collected from the Gnutella system. Analysis on the Gnutella data has verified that social associations of peers in reality are directed, asymmetric and weighted, validating the design of SoPPSoN. The tests presented in this paper have also evaluated the scalability of SoPPSoN, its performance under varied initial network connectivity and the effects of different learning rules.National Natural Science of Foundation of Chin

Oscillation-based Test Method for Continuous-time OTA-C Filters

“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”Design for testability technique using oscillation-based test topology for KHN OTA-C filters is proposed. The oscillation-based test structure is a vectorless output test strategy easily extendable to built-in self-test. During test mode, the filter under test is converted into an oscillator by establishing the oscillation condition in its transfer function. The oscillator frequency can be measured using digital circuitry and deviations from the cut-off frequency indicate the faulty behaviour of the filter. The proposed method is suitable for both catastrophic and parametric fault diagnosis as well as effective in detecting single and multiple faults. The validity of the proposed method has been verified using comparison between faulty and fault-free simulation results of KHN OTA-C filter. Simulation results in 0.25mum CMOS technology show that the proposed oscillation-based test strategy has 84% fault coverage and with a minimum number of extra components, requires a negligible area overhead.Final Published versio

Discussion on `Characterization of 1-3 piezoelectric polymer composites - a numerical and analytical evaluation procedure for thickness mode vibrations' by C.V. Madhusudhana Rao, G. Prasad, Condens. Matter Phys., 2010, Vol.13, No.1, 13703

In the paper entitled "Characterization of 1-3 piezoelectric polymer composites - a numerical and analytical evaluation procedure for thickness mode vibrations", the dependence of the thickness electromechanical coupling coefficient on the aspect ratio of piezoceramic fibers is studied by finite element simulation for various volume fractions of piezoceramic fibers in a 1-3 composite. The accuracy of the results is questionable because the boundary condition claiming that `predefined displacements are applied perpendicularly on $C^+$ plane on all nodes' is not suitable for the analysis of 1-3 composite with comparatively large aspect ratio from 0.2 to 1. A discussion regarding this problem and the suggested corrections are presented in this paper.Comment: 4 pages, 3 figure

A channel estimation method for MIMO-OFDM Mobile WiMax systems

This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.In this paper, channel estimation for Space-Time Block Code (STBC) - Orthogonal Frequency Division Multiplexing (OFDM) is investigated for Mobile WiMax systems. A new channel estimation approach is proposed using the dedicated pilot subcarriers defined at constant intervals by the WiMax standard. The estimation method has low computation as only linear operations are needed due to orthogonal pilot coding. The performances of the proposed method have been demonstrated by extensive computer simulations. For the OFDM system with two transmit antennas and one to four receive antennas and using QPSK modulation, the simulated results under different Stanford University Interim (SUI) channels show that the proposed method has only a 4dB loss compared to the ideal case where the channel is known at the receiver

A sparse semi-blind source identification method and its application to Raman spectroscopy for explosives detection

Rapid and reliable detection and identification of unknown chemical substances are critical to homeland security. It is challenging to identify chemical components from a wide range of explosives. There are two key steps involved. One is a non-destructive and informative spectroscopic technique for data acquisition. The other is an associated library of reference features along with a computational method for feature matching and meaningful detection within or beyond the library. In this paper, we develop a new iterative method to identify unknown substances from mixture samples of Raman spectroscopy. In the first step, a constrained least squares method decomposes the data into a sum of linear combination of the known components and a non-negative residual. In the second step, a sparse and convex blind source separation method extracts components geometrically from the residuals. Verification based on the library templates or expert knowledge helps to confirm these components. If necessary, the confirmed meaningful components are fed back into step one to refine the residual and then step two extracts possibly more hidden components. The two steps may be iterated until no more components can be identified. We illustrate the proposed method in processing a set of the so called swept wavelength optical resonant Raman spectroscopy experimental data by a satisfactory blind extraction of a priori unknown chemical explosives from mixture samples. We also test the method on nuclear magnetic resonance (NMR) spectra for chemical compounds identification. © 2013 Published by Elsevier B.V