10 research outputs found
Relationship between elevation change measured with LiDAR derived-DTMs and in situ measurements with pins.
In situ measured data (x axis) show difference in elevation between December 2014 (3 months after restoration) and March 2017. Left: Compares in situ data to elevation changes derived from LiDAR data taken in October 2014 and March 2017, and Right compares elevation changes between January 2015 and March 2017. No LiDAR images are available for December 2014. Solid lines show a 1:1 relationship and the dashed lines show the actual relationship (linear regression) between DTM-derived and in situ measurements (dash lines Left: R2 = 0.775, P 2 = 0.686, P = 0.002). LiDAR measurements are strongly related to in situ measurements and are not systematically biased when sampling periods are more closely matched (i.e. Right).</p
Cumulative sedimentation at Steart Marshes calculated from LiDAR DTMs (LiDAR data obtained from data.gov.uk).
(a) Change in elevation (cm) between 13/09/2018 (1470 days since breach) and 31/10/2014 (57 days since breach). (b) Cumulative change in elevation over time for individual 50x50 cm pixels. Points show median cumulative change for a random sample of 10,000 pixels. Error bars show the interquartile range for the same sample of pixels.</p
Relationship between elevation change (2014–2018) and initial elevation for a random sample of 10,000 pixels taken across Steart Marshes.
The solid line shows the relationship between elevation change and starting elevation modelled by a generalised additive model (effective df = 8.8, F = 369.2, P < 0.001). For clarity, the x-axis limits have been clipped to show only the middle 95% of data (4.25–6.60 m starting elevation), but data from all elevations were used to fit the generalised additive model. The dashed line indicates an elevation change of zero (i.e. no net accretion or erosion).</p
Carbon accumulation potential (tC ha<sup>-1</sup> yr<sup>-1</sup>) of saltmarsh restored by managed realignment.
The coloured surface shows rates of carbon accumulation for each combination of accretion and carbon density. Observed values from Steart (S and S’, this study) and published studies at Tollesbury (T [high marsh] and T’ [low marsh] from [54, 84]) and the Bay of Fundy (F, [30]) are mapped on to this carbon accumulation space. TC indicates total carbon density, and TOC indicates total organic carbon density.</p
Total carbon content of soil and sediment samples collected from Steart Marshes before and after the restoration of tidal inundation.
Soil samples were collected prior to restoration from an area heavily disturbed during construction (site A), an area of pasture (site B), grass ley (site C) and arable (site D). ‘New sediment’ are samples of newly accumulated sediments from the restored site after restoration, with data from all locations and time points pooled. Sediment was also collected from an adjacent natural saltmarsh. Differing letters denote significant differences in the carbon content of sediments between locations (P < 0.05).</p
Elements that require consideration in the quantification of a full carbon budget of a managed realignment site.
The aspects included in this study, the approaches to these that we took, and any implications of these approaches are also given.</p
Relationship between soil carbon content and depth.
Cores were taken each year at three locations in each starting land-use. Depths are expressed relative to the horizon between agricultural soil and newly deposited sediment, except for natural saltmarsh where depths are from the surface (note difference in y-axis scale for natural saltmarsh). Lines show fits of locally weighted polynomial (loess) models pooling data across locations and years. Loess models have been fit to new sediment (depth > 2 cm) and old sediment (depth < -2 cm) to reduce the effect of vegetation on the horizon.</p
Sedimentation at Steart Marshes measured by comparing LiDAR DTMs to a baseline survey on 31 October 2014, 57 days after sea defences were breached.
Sedimentation at Steart Marshes measured by comparing LiDAR DTMs to a baseline survey on 31 October 2014, 57 days after sea defences were breached.</p
Design and construction elements of Steart managed realignment, Somerset, UK.
a) Land use prior to the start of site construction in 2012, and locations of sampling points and the flood embankments constructed (new) or modified (raised) during the project; existing embankments that remained after the project are also shown. Land use classes created by authors based on data from Centre for Ecology and Hydrology Land Cover Map 2007 [82] and the project environmental statement [83]. b) Elevations across the site showing design and location of creek network, lagoons and islands. The location of the breach is also shown. Elevations based on LiDAR data from October 2014 [43].</p