15 research outputs found
Fluid dynamics of aortic root dilation in Marfan syndrome
Aortic root dilation and propensity to dissection are typical manifestations
of the Marfan Syndrome (MS), a genetic defect leading to the degeneration of
the elastic fibres. Dilation affects the structure of the flow and, in turn,
altered flow may play a role in vessel dilation, generation of aneurysms, and
dissection. The aim of the present work is the investigation in-vitro of the
fluid dynamic modifications occurring as a consequence of the morphological
changes typically induced in the aortic root by MS. A mock-loop reproducing the
left ventricle outflow tract and the aortic root was used to measure time
resolved velocity maps on a longitudinal symmetry plane of the aortic root. Two
dilated model aortas, designed to resemble morphological characteristics
typically observed in MS patients, have been compared to a reference, healthy
geometry. The aortic model was designed to quantitatively reproduce the change
of aortic distensibility caused by MS. Results demonstrate that vorticity
released from the valve leaflets, and possibly accumulating in the root, plays
a fundamental role in redirecting the systolic jet issued from the aortic
valve. The altered systolic flow also determines a different residual flow
during the diastole.Comment: Accepted versio
The development of visuotactile congruency effects for sequences of events.
Abstract Sensitivity to the temporal coherence of visual and tactile signals increases perceptual reliability and is evident during infancy. However, it is not clear how, or whether, bidirectional visuotactile interactions change across childhood. Furthermore, no study has explored whether viewing a body modulates how children perceive visuotactile sequences of events. Here, children aged 5–7 years (n = 19), 8 and 9 years (n = 21), and 10–12 years (n = 24) and adults (n = 20) discriminated the number of target events (one or two) in a task-relevant modality (touch or vision) and ignored distractors (one or two) in the opposing modality. While participants performed the task, an image of either a hand or an object was presented. Children aged 5–7 years and 8 and 9 years showed larger crossmodal interference from visual distractors when discriminating tactile targets than the converse. Across age groups, this was strongest when two visual distractors were presented with one tactile target, implying a "fission-like" crossmodal effect (perceiving one event as two events). There was no influence of visual context (viewing a hand or non-hand image) on visuotactile interactions for any age group. Our results suggest robust interference from discontinuous visual information on tactile discrimination of sequences of events during early and middle childhood. These findings are discussed with respect to age-related changes in sensory dominance, selective attention, and multisensory processing
Neuromorphic vibrotactile stimulation of fingertips for encoding object stiffness in telepresence sensory substitution and augmentation applications
We present a tactile telepresence system for real-time transmission of information about object stiffness to the human fingertips. Experimental tests were performed across two laboratories (Italy and Ireland). In the Italian laboratory, a mechatronic sensing platform indented different rubber samples. Information about rubber stiffness was converted into on-off events using a neuronal spiking model and sent to a vibrotactile glove in the Irish laboratory. Participants discriminated the variation of the stiffness of stimuli according to a two-alternative forced choice protocol. Stiffness discrimination was based on the variation of the temporal pattern of spikes generated during the indentation of the rubber samples. The results suggest that vibrotactile stimulation can effectively simulate surface stiffness when using neuronal spiking models to trigger vibrations in the haptic interface. Specifically, fractional variations of stiffness down to 0.67 were significantly discriminated with the developed neuromorphic haptic interface. This is a performance comparable, though slightly worse, to the threshold obtained in a benchmark experiment evaluating the same set of stimuli naturally with the own hand. Our paper presents a bioinspired method for delivering sensory feedback about object properties to human skin based on contingency-mimetic neuronal models, and can be useful for the design of high performance haptic devices
Haptic Glove and Platform with Gestural Control For Neuromorphic Tactile Sensory Feedback In Medical Telepresence †
Haptic Glove and Platform with Gestural Control For Neuromorphic Tactile Sensory Feedback In Medical Telepresence
Advancements in the study of the human sense of touch are fueling the field of haptics. This is paving the way for augmenting sensory perception during object palpation in tele-surgery and reproducing the sensed information through tactile feedback. Here, we present a novel tele-palpation apparatus that enables the user to detect nodules with various distinct stiffness buried in an ad-hoc polymeric phantom. The contact force measured by the platform was encoded using a neuromorphic model and reproduced on the index fingertip of a remote user through a haptic glove embedding a piezoelectric disk. We assessed the effectiveness of this feedback in allowing nodule identification under two experimental conditions of real-time telepresence: In Line of Sight (ILS), where the platform was placed in the visible range of a user; and the more demanding Not In Line of Sight (NILS), with the platform and the user being 50 km apart. We found that the entailed percentage of identification was higher for stiffer inclusions with respect to the softer ones (average of 74% within the duration of the task), in both telepresence conditions evaluated. These promising results call for further exploration of tactile augmentation technology for telepresence in medical interventions
Encapsulation of Piezoelectric Transducers for Sensory Augmentation and Substitution with Wearable Haptic Devices
The integration of polymeric actuators in haptic displays is widespread nowadays, especially in virtual reality and rehabilitation applications. However, we are still far from optimizing the transducer ability in conveying sensory information. Here, we present a vibrotactile actuator characterized by a piezoelectric disk embedded in a polydimethylsiloxane (PDMS) shell. An original encapsulation technique was performed to provide the stiff active element with a compliant cover as an interface towards the soft human skin. The interface stiffness, together with the new geometry, generated an effective transmission of vibrotactile stimulation and made the encapsulated transducer a performant component for the development of wearable tactile displays. The mechanical behavior of the developed transducer was numerically modeled as a function of the driving voltage and frequency, and the exerted normal forces were experimentally measured with a load cell. The actuator was then tested for the integration in a haptic glove in single-finger and bi-finger condition, in a 2-AFC tactile stimulus recognition test. Psychophysical results across all the tested sensory conditions confirmed that the developed integrated haptic system was effective in delivering vibrotactile information when the frequency applied to the skin is within the 200–700 Hz range and the stimulus variation is larger than 100 Hz
Tactile sensor array integrating fiber Bragg grating transducers for biomechanical measurement
Design and preliminary evaluation of haptic devices for upper limb stimulation and integration within a virtual reality cave
During the last decade significant advances have been made in vibrotactile actuator design that are leading to the development of novel haptic technologies. Similarly, important innovations have been made in the area of virtual reality for scene rendering and user tracking. However, the integration of these technologies has not been well explored. In this paper, we outline a broad design philosophy and integration plan of these tools. In addition, we give an overview of applications for such a cohesive set of technologies. Preliminary results are provided to demonstrate their critical importance and future widespread use
Neuromorphic haptic glove and platform with gestural control for tactile sensory feedback in medical telepresence applications
This paper presents a tactile telepresence system employed for the localization of stiff inclusions embedded in a soft matrix. The system delivers a neuromorphic spike-based haptic feedback, encoding object stiffness, to the human fingertip. For the evaluation of the developed system, in this study a customized silicon phantom was fabricated inserting 12 inclusions made of 4 different polymers (3 replicas for each material). Such inclusions, all of them having the same shape, were encapsulated in a softer silicon matrix in randomized positions. Two main blocks composed the experimental setup. The first sub-setup included an optical sensor for tracking human hand movements and a piezoelectric disk, inserted into a glove at the level of the index fingertip, to deliver tactile feedback. The second sub-setup was a 3-axis cartesian motorized sensing platform which explored the silicon phantom through a spherical indenter mechanically linked to a load cell. The movements of the platform were based on the acquired hand gestures of the user. The normal force exerted during the active sliding was converted into temporal patterns of spikes through a neuronal model, and delivered to the fingertip via the vibrotactile glove. Inclusions were detected through modulation in the aforementioned patterns generated during the experimental trials. Results suggest that the presented system allows the recognition of the stiffness variation between the encapsulated inclusions and the surrounding matrix. As expected, stiffer inclusions were more frequently discriminated than softer ones, with about 70% of stiffer inclusions being identified in the proposed task. Future works will address the investigation of a larger set of materials in order to evaluate a finer distribution of stiffness values
Neuromorphic haptic glove and platform with gestural control for tactile sensory feedback in medical telepresence applications
This paper presents a tactile telepresence system employed for the localization of stiff inclusions embedded in a soft matrix. The system delivers a neuromorphic spike-based haptic feedback, encoding object stiffness, to the human fingertip. For the evaluation of the developed system, in this study a customized silicon phantom was fabricated inserting 12 inclusions made of 4 different polymers (3 replicas for each material). Such inclusions, all of them having the same shape, were encapsulated in a softer silicon matrix in randomized positions. Two main blocks composed the experimental setup. The first sub-setup included an optical sensor for tracking human hand movements and a piezoelectric disk, inserted into a glove at the level of the index fingertip, to deliver tactile feedback. The second sub-setup was a 3-axis cartesian motorized sensing platform which explored the silicon phantom through a spherical indenter mechanically linked to a load cell. The movements of the platform were based on the acquired hand gestures of the user. The normal force exerted during the active sliding was converted into temporal patterns of spikes through a neuronal model, and delivered to the fingertip via the vibrotactile glove. Inclusions were detected through modulation in the aforementioned patterns generated during the experimental trials. Results suggest that the presented system allows the recognition of the stiffness variation between the encapsulated inclusions and the surrounding matrix. As expected, stiffer inclusions were more frequently discriminated than softer ones, with about 70% of stiffer inclusions being identified in the proposed task. Future works will address the investigation of a larger set of materials in order to evaluate a finer distribution of stiffness values