1,491 research outputs found
Recommended from our members
Simulation of wellbore construction in offshore unconsolidated methane hydrate-bearing formation
The unconsolidated nature of offshore methane hydrate-bearing formation poses challenges to sustainable methane gas production as the weak formation is susceptible to disturbance during wellbore construction. This could contribute to loss of well integrity which could manifest as sand production and error in the interpretation of downhole tests such as mini-frac tests. In this study, a simulation methodology of wellbore construction process is proposed. A finite element model adopting this methodology is developed in order to assess the effect of wellbore construction process on the integrity of the unconsolidated methane hydrate-bearing formation in the Nankai Trough, Japan. The main objectives are (i) to develop a modelling methodology of well construction process for numerical simulations, (ii) to assess the zone and magnitude of well construction-induced stress/strain disturbance in the formation and (iii) to evaluate relative impact of each well construction stage on the integrity of the formation. The results from this study show that the zone of horizontal stress disturbance from the geostatic state due to wellbore construction could extend to more than three times the radius of the wellbore. Following the wellbore construction, the deviator stress is concentrated in the hydrate reservoir sublayers with high hydrate saturation while plastic deviatoric strain has accumulated in the sublayers with low hydrate saturation. The results also show that modelling of cement shrinkage process is crucial in predicting the concentration of deviator stress in the high hydrate saturation layers
Water absorption and shrinkage behaviour of early-age cement in wellbore annulus
Controlling cement shrinkage in a wellbore is important in maintaining its integrity. Although numerous laboratory experiments on the water absorption and shrinkage behaviour of oil well cement have been reported in the past, such behaviour in the wellbore annulus with consideration of pore water migration from the surrounding formation has seldom been examined. In this study, using a cement shrinkage model calibrated against available experimental data, a coupled hydromechanical finite element analysis of a cement-formation model is conducted to simulate the water migration, absorption and shrinkage behaviour of early-age cement placed in the annulus of a wellbore. The objectives of this study are (i) to identify the threshold permeability value of the formation above which there is no longer a bottleneck for pore water to flow into the cement and (ii) to estimate a reasonable range of cement bulk shrinkage volume in wellbore annulus geometry. Results show that the threshold permeability of the formation would be around 0.1 mD for three different types of cement examined in this study: Class G cement, rapid setting (RS) cement and Schlumberger optimized particle size distribution (OPSD) technology cement. The bulk shrinkage volume varies from 0.01% to 2.4% depending on cement type and formation permeability (1 mD to 0.1 ÎĽD). The proposed methodology facilitates the simulation of water migration/absorption and shrinkage behaviour of well cement in different formations
Properties of ((CH3NH3)1-xCsx)3Bi2I9: (x=0-1.0) Hybrid Perovskite Solar Cells with Chlorobenzene Treatment
Abstract: Hybrid-perovskite solar cells, a promising lead-free perovskite material, have been attracted for optoelectronic applications due to an excellent optical and electrical properties with low production cost. Herein, methylammonium bismuth iodide and cesium bismuth iodide were mixed to form hybrid structure for the improvement of photovoltaic properties, which were fabricated using all-solution processed multi-step spin coating technique with changing the composition, x, of CBI, ((CH3NH3)1-xCsx)3Bi2I9; (x=0 – 1.0). Chlorobenzene was added to the solution to improve the surface morphology. By optimizing the composition of CBI in MBI, the morphology, structural and optical properties of HPeSCs have been improved. It showed that the morphology is homogeneous, compact and a uniform layer, while the crystallinity shows an improvement as well. The open circuit voltage, the short circuit current and the power conversion efficiency were much improved with using hybrid structure. Our study shows that the significance of the hybridization process gives a new route in fabricating a better active absorber layer of PeSCs in the future
Recommended from our members
Considerations for monitoring of deep circular excavations
Understanding the magnitude and distribution of ground movements associated with deep shaft construction is a key factor in designing efficient damage prevention/mitigation measures. Therefore, a large-scale monitoring scheme was implemented at Thames Water's 68 m deep Abbey Mills Shaft F in East London, UK, constructed as part of the Lee Tunnel Project. The scheme comprised inclinometers and extensometers which were installed in the diaphragm walls and in boreholes around the shaft to measure deflections and ground movements. However, interpreting the measurements from inclinometers can be a challenging task, as it is often not feasible to extend the boreholes into ground unaffected by movements. The paper describes in detail how the data are corrected. The corrected data showed very small wall deflections of less than 4 mm at the final shaft excavation depth. Similarly, very small ground movements were measured around the shaft. Empirical ground settlement prediction methods derived from different shaft construction methods significantly overestimate settlements for a diaphragm wall shaft. The results of this study will help to inform future projects, such as the forthcoming 25 km long Thames Tideway Tunnel with its 18 deep shafts being constructed adjacent to existing infrastructure. Engineering and Physical Sciences Research CouncilThis is the author accepted manuscript. The final version is available from ICE Publishing via http://dx.doi.org/10.1680/jgeen.15.0006
Re-thinking uk transport emissions – Getting to the 2050 targets
Transport is a complex system, integral to national and international structure and without which society cannot function. At the same time, transport is a significant contributor to global greenhouse gas emissions. In the UK a step change is required in the transport sector to achieve the legally binding reduction targets of the Climate Change Act 2008. Following the UK government’s 2013 review of carbon dioxide emissions from infrastructure, this paper looks at the country’s present and projected transport emissions in the context of the transport status quo and plans for growth. It argues there is an urgent need to rebalance the transport modal mix, with all modes integrated into a seamless transport system with smart interfacing between them. Drivers for behavioural change are also essential.Engineering and Physical Sciences Research CouncilThis is the final version of the article. It first appeared from ICE Publishing via https://doi.org/10.1680/jcien.15.0007
- …