48 research outputs found
Steel Module-to-Concrete Core Connection Methods in High Rise Modular Buildings: A Critical Review
Modularization in a high-rise building is different from a small building, as it is exposed to more lateral forces like wind and earthquakes. The integrity, robustness, and overall stability of the modules and their performance is based on the joining techniques and strong structural systems. High lateral stiff construction structures like concrete shear walls and frames, braced steel frames, and steel moment frames are used for the stability of high-rise modular buildings. Similarly, high-rise stick-built buildings have concrete cores and perimeter frames for lateral load strength and stiffness. Methods for general steel-concrete connections are available in many works of literature. However, there are few modular-related papers describing this connection system in modular buildings. This paper aims to review the various research and practice adopted for steel-to-concrete connections in construction and compare the methods between stick-built buildings and modular buildings. The literature review shows that the practice of steel module-to-concrete core connection in high-rise modular buildings is like outrigger beams-to-concrete core connection in stick-built framed buildings. This paper concludes that further studies are needed in developing proper guidelines for a steel module-to-concrete core connection system in high-rise modular buildings
Lessons Learned during the Early Phases of a Modular Project: A Case Study of UNLV\u27s Solar Decathlon 2020 Project
The U.S. Department of Energy conducts the Solar Decathlon competition as a student-based achievement that encourages sustainable design with energy efficiency and solar energy technologies. In the 2020 competition, the University of Nevada, Las Vegas (UNLV) team designed, fabricated, and constructed a net-zero modular house that applies innovative and highly efficient building technologies. This paper focused on the lessons learned during the early phases of this ongoing modular project. The research methodology included obtaining feedback from key project participants using a well-structured questionnaire. The results showed that the major items/challenges in the project’s planning phase included selecting the modular size, planning the construction system, planning the materials and procurement, estimating costs and duration, selecting a fabricator, collaboration and communication, safety, and planning module transportation. These findings will help modular practitioners and future Solar Decathlon competition participants better understand how and what factors they should consider most during the early phases through the lessons learned
Cutting-edge Technologies to Achieve a Higher Level of Modular Construction – Literature Review
Cost overruns, schedule delays, and a shortage of skilled labor are common problems the construction industry is currently experiencing. Modularization and standardization strategies have the potential to resolve the various problems mentioned above and have been applied for various construction applications for a long time. However, the level of modularization remains low, and modular construction projects have not been getting the full benefits. Thus, this review investigated the cutting-edge technologies currently being utilized to develop the modular construction field. For this paper, qualified research papers were identified using predetermined keywords from previous related research papers. Identified literature was then filtered and analyzed. According to the included reviews, several technologies are being developed for modular construction. For example, automated design and monitoring systems for modularization were developed. In addition, research labs are utilizing robotic arms for modular construction to achieve a high level of completion in the construction industry, as is seen in the manufacturing industry. Despite these efforts, more research and development are necessary because some automation technologies still require manual activities. Thus, there is great potential for further development of modularization techniques, and further research is recommended to achieve high levels of modularization
The Current State and Future Directions of Industrial Robotic Arms in Modular Construction
Industrial robotic arms are widely adopted in numerous industries for manufacturing automation under factory settings, which eliminates the limitations of manual labor and provides significant productivity and quality benefits. The U.S. modular construction industry, despite having similar controlled factory environments, still heavily relies on manual labor. Thus, this study investigates the U.S., Canada, and Europe-based leading modular construction companies and research labs implementing industrial robotic arms for manufacturing automation. The investigation mainly considered the current research scope, industry state, and constraints, as well as identifying the types and specifications of the robotic arms in use. First, the study investigated well-recognized modular building associations, the Modular Building Institute (MBI), and renowned architecture design magazine, Dezeen to gather industry updates. The authors discovered one university lab and a few companies that adopted Switzerland-based robotic arms, ABB. Researching ABB robotics led to the discovery of ABB’s competitor, Germany-based KUKA robotic arms. Consequently, research extended to the companies and labs adopting KUKA models. In total, this study has identified seven modular companies and four research labs. All companies employed robotic arms and gantry robot combinations in a production-line-like system for partial automation, and some adopted design standardization for optimization. The common goal among the labs was to achieve greater flexibility and full automation with robotic arms. This study will help companies better implement robotic arm automation by providing recommendations from investigating its current industry status
Addressing Negative Transfer in Diffusion Models
Diffusion-based generative models have achieved remarkable success in various
domains. It trains a model on denoising tasks that encompass different noise
levels simultaneously, representing a form of multi-task learning (MTL).
However, analyzing and improving diffusion models from an MTL perspective
remains under-explored. In particular, MTL can sometimes lead to the well-known
phenomenon of , which results in the performance
degradation of certain tasks due to conflicts between tasks. In this paper, we
aim to analyze diffusion training from an MTL standpoint, presenting two key
observations: the task affinity between denoising tasks
diminishes as the gap between noise levels widens, and negative
transfer can arise even in the context of diffusion training. Building upon
these observations, our objective is to enhance diffusion training by
mitigating negative transfer. To achieve this, we propose leveraging existing
MTL methods, but the presence of a huge number of denoising tasks makes this
computationally expensive to calculate the necessary per-task loss or gradient.
To address this challenge, we propose clustering the denoising tasks into small
task clusters and applying MTL methods to them. Specifically, based on
, we employ interval clustering to enforce temporal proximity
among denoising tasks within clusters. We show that interval clustering can be
solved with dynamic programming and utilize signal-to-noise ratio, timestep,
and task affinity for clustering objectives. Through this, our approach
addresses the issue of negative transfer in diffusion models by allowing for
efficient computation of MTL methods. We validate the proposed clustering and
its integration with MTL methods through various experiments, demonstrating
improved sample quality of diffusion models.Comment: 22 pages, 12 figures, under revie
Towards Practical Plug-and-Play Diffusion Models
Diffusion-based generative models have achieved remarkable success in image
generation. Their guidance formulation allows an external model to
plug-and-play control the generation process for various tasks without
fine-tuning the diffusion model. However, the direct use of publicly available
off-the-shelf models for guidance fails due to their poor performance on noisy
inputs. For that, the existing practice is to fine-tune the guidance models
with labeled data corrupted with noises. In this paper, we argue that this
practice has limitations in two aspects: (1) performing on inputs with
extremely various noises is too hard for a single model; (2) collecting labeled
datasets hinders scaling up for various tasks. To tackle the limitations, we
propose a novel strategy that leverages multiple experts where each expert is
specialized in a particular noise range and guides the reverse process at its
corresponding timesteps. However, as it is infeasible to manage multiple
networks and utilize labeled data, we present a practical guidance framework
termed Practical Plug-And-Play (PPAP), which leverages parameter-efficient
fine-tuning and data-free knowledge transfer. We exhaustively conduct ImageNet
class conditional generation experiments to show that our method can
successfully guide diffusion with small trainable parameters and no labeled
data. Finally, we show that image classifiers, depth estimators, and semantic
segmentation models can guide publicly available GLIDE through our framework in
a plug-and-play manner
Recommended from our members
Performance/outcomes data and physician process challenges for practical big data efforts in radiation oncology
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/146290/1/mp13136.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/146290/2/mp13136_am.pd
The value of diffusion-weighted imaging in assessing the ADC changes of tissues adjacent to breast carcinoma
<p>Abstract</p> <p>Background</p> <p>To define a threshold value of apparent diffusion coefficient (ADC) with which malignant breast lesions can be distinguished from benign lesions, and to evaluate the ADC change of peri-tumor tissue in breast carcinoma by echo planar-diffusion weighted imaging (EPI-DWI).</p> <p>Methods</p> <p>57 breast lesions were scanned by routine MRI and EPI-DWI. The ADC values were compared between malignant and benign lesions. The sensitivity and specificity of EPI-DWI and the threshold ADC value were evaluated by Receiver Operating Characteristic curve (ROC). The ADC values of malignant lesion and layered peri-tumor tissues (from innermost layer 1 to outermost layer 4 with 5 mm every layer) in different directions were compared and the ADC values among different layers were compared.</p> <p>Results</p> <p>The ADC value of 35 malignant lesions was statistically lower than that of 22 benign lesions (P < 0.05). In ROC curve, the threshold value was 1.24 +/- 0.25*10E-3 mm<sup>2</sup>/s (b = 500) or 1.20 +/- 0.25*10E-3 mm<sup>2</sup>/s (b = 1000). The ADC value of malignant lesions was statistically lower than that of peri-tumor tissues in different directions (P < 0.05). For peri-tumor tissues, the ADC values increased gradually from layer 1 to layer 4 and there was a significant difference between the ADC values of layer 1 and layer 2 (P < 0.05); while from layer 2 outwards, there was no statistical difference among different layers.</p> <p>Conclusion</p> <p>ADC value was a sensitive and specific parameter that could help to differentiate benign and malignant breast lesions. ADC changes in tissues adjacent to breast carcinoma could be detected by EPI-DWI, which made EPI-DWI a promising method for helping to determine surgical scope of breast carcinoma.</p
Efficacy and safety of gonadotropin-releasing hormone agonists used in the treatment of prostate cancer
Androgen deprivation therapy (ADT) is the most effective systemic treatment for prostate cancer. ADT has been shown to have a high rate of response and to improve overall survival in patients with metastatic prostate cancer. In addition, multiple studies have shown that adding ADT to external beam radiation therapy leads to improvement in cure rates and overall survival in prostate cancer patients. The most commonly used ADT is gonadotropin-releasing hormone (GnRH) agonist therapy. Although GnRH agonist therapy has significant benefits for patients with prostate cancer, it has also been shown to have significant side effects, including fatigue, hot flashes, decreased libido, decreased quality of life, obesity, diabetes mellitus, coronary artery disease, decreased bone mineral density, and increased risk of fractures. Therefore, it is crucial that the benefits of ADT be weighed against its potential adverse effects before its use