Polarization fluctuation dominated electrical transport processes of polymer based ferroelectric-field-effect transistors

Ferroelectric field-effect transistors (FE-FETs) consisting of tunable dielectric layers are utilized to investigate interfacial transport processes. Large changes in the dielectric constant as a function of temperature are observed in FE-FETs in conjunction with the ferroelectric to paraelectric transition. The devices offer a test bed to evaluate specific effects of polarization on the electrical processes. FE-FETs have dominant contributions from polarization-fluctuation rather than static dipolar disorder prevalent in high k paraelectric dielectric-based FETs. Additionally, photo-excitation measurements in the depletion mode reveal clear features in the FET response at different temperatures, indicative of different transport regimes.Comment: 6 figure

Interface engineering of mesoscopic hybrid organic-inorganic perovskite solar cells

We report on the optimization of the interfacial properties of titania in mesoscopic CH3NH3PbI3 perovskite solar cells (PSCs). Modification of the mesoporous titania (mp-TiO2) film by TiCl4 treatment substantially reduced the surface traps, as is evident from the sharpness of the absorption edge with a significant reduction in Urbach energy (from 320 to 140 meV) determined from photothermal deflection spectroscopy, and led to an order of magnitude enhancement in the bulk electron mobility and corresponding decrease in the transport activation energy (from 170 to 90 meV) within a device. After optimization of the photoanode–perovskite interface using various sizes of TiO2 nanoparticles, the best photovoltaic efficiency of 16.3% was achieved with the mesoporous TiO2 composed of 36 nm sized nanoparticles. The improvement in device performance can be attributed to the enhanced charge collection efficiency that is driven by improved charge transport in the mesoporous TiO2 layer. Also, the decreased recombination at the TiO2–perovskite interface and better perovskite coverage play important roles

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells.

Here, we demonstrate the incorporation of monovalent cation additives into CH3NH3PbI3 perovskite in order to adjust the optical, excitonic, and electrical properties. The possibility of doping was investigated by adding monovalent cation halides with similar ionic radii to Pb2+, including Cu+, Na+, and Ag+. A shift in the Fermi level and a remarkable decrease of sub-bandgap optical absorption, along with a lower energetic disorder in the perovskite, was achieved. An order-of-magnitude enhancement in the bulk hole mobility and a significant reduction of transport activation energy within an additive-based perovskite device was attained. The confluence of the aforementioned improved properties in the presence of these cations led to an enhancement in the photovoltaic parameters of the perovskite solar cell. An increase of 70 mV in open circuit voltage for AgI and a 2 mA/cm2 improvement in photocurrent density for NaI- and CuBr-based solar cells were achieved compared to the pristine device. Our work paves the way for further improvements in the optoelectronic quality of CH3NH3PbI3 perovskite and subsequent devices. It highlights a new avenue for investigations on the role of dopant impurities in crystallization and controls the electronic defect density in perovskite structures.M. Abdi-Jalebi thanks Nava Technology Limited for a PhD scholarship. M.I. Dar and M.Grätzel thank the King Abdulaziz City for Science and Technology (KACST) and the Swiss National Science Foundation (SNSF) for financial support

Solution‐processed high‐performance ZnO nano‐FETs fabricated with direct‐write electron‐beam‐lithography‐based top‐down route

Zinc oxide (ZnO) has been extensively investigated for use in large-area electronics; in particular, the solution-processing routes have shown increasing promise towards low-cost fabrication. However, top-down fabrication approaches with nanoscale resolution, towards aggressively scaled device platforms, are still underexplored. This study reports a novel approach of direct-write electron-beam lithography (DW-EBL) of solution precursors as negative tone resists, followed by optimal precursor processing to fabricate micron/nano-field-effect transistors (FETs). It is demonstrated that the mobility and current density of ZnO FETs can be increased by two orders of magnitude as the precursor pattern width is decreased from 50 µm to 100 nm. These nano-FET devices exhibit field-effect mobility exceeding ≈30 cm2 V−1 s−1 and on-state current densities reaching 10 A m−1, the highest reported so far for direct-write precursor-patterned nanoscale ZnO FETs. Using atomic force microscopy and parametric modeling, the origin of such device performance improvement is investigated. The findings emphasize the influence of pre-decomposition nanoscale precursor patterning on the grain morphology evolution in ZnO and, consequently, open up large-scale integration, and miniaturization opportunities for solution-processed, high-performance nanoscale oxide FETs

Self-Assembled Photochromic Molecular Dipoles for High-Performance Polymer Thin-Film Transistors.

The development of high-performance multifunctional polymer-based electronic circuits is a major step toward future flexible electronics. Here, we demonstrate a tunable approach to fabricate such devices based on rationally designed dielectric super-lattice structures with photochromic azobenzene molecules. These nanodielectrics possessing ionic, molecular, and atomic polarization are utilized in polymer thin-film transistors (TFTs) to realize high-performance electronics with a p-type field-effect mobility (μFET) exceeding 2 cm2 V-1 s-1. A crossover in the transport mechanism from electrostatic dipolar disorder to ionic-induced disorder is observed in the transistor characteristics over a range of temperatures. The facile supramolecular design allows the possibility to optically control the extent of molecular and ionic polarization in the ultrathin nanodielectric. Thus, we demonstrate a 3-fold increase in the capacitance from 0.1 to 0.34 μF/cm2, which results in a 200% increase in TFT channel current

Substitution of lead with tin suppresses ionic transport in halide perovskite optoelectronics.

Despite the rapid rise in the performance of a variety of perovskite optoelectronic devices with vertical charge transport, the effects of ion migration remain a common and longstanding Achilles' heel limiting the long-term operational stability of lead halide perovskite devices. However, there is still limited understanding of the impact of tin (Sn) substitution on the ion dynamics of lead (Pb) halide perovskites. Here, we employ scan-rate-dependent current-voltage measurements on Pb and mixed Pb-Sn perovskite solar cells to show that short circuit current losses at lower scan rates, which can be traced to the presence of mobile ions, are present in both kinds of perovskites. To understand the kinetics of ion migration, we carry out scan-rate-dependent hysteresis analyses and temperature-dependent impedance spectroscopy measurements, which demonstrate suppressed ion migration in Pb-Sn devices compared to their Pb-only analogues. By linking these experimental observations to first-principles calculations on mixed Pb-Sn perovskites, we reveal the key role played by Sn vacancies in increasing the iodide ion migration barrier due to local structural distortions. These results highlight the beneficial effect of Sn substitution in mitigating undesirable ion migration in halide perovskites, with potential implications for future device development

Systematic Study of Ferromagnetism in CrxSb2-xTe3 Topological Insulator Thin Films using Electrical and Optical Techniques.

Ferromagnetic ordering in a topological insulator can break time-reversal symmetry, realizing dissipationless electronic states in the absence of a magnetic field. The control of the magnetic state is of great importance for future device applications. We provide a detailed systematic study of the magnetic state in highly doped CrxSb2-xTe3 thin films using electrical transport, magneto-optic Kerr effect measurements and terahertz time domain spectroscopy, and also report an efficient electric gating of ferromagnetic order using the electrolyte ionic liquid [DEME][TFSI]. Upon increasing the Cr concentration from x = 0.15 to 0.76, the Curie temperature (Tc) was observed to increase by ~5 times to 176 K. In addition, it was possible to modify the magnetic moment by up to 50% with a gate bias variation of just ±3 V, which corresponds to an increase in carrier density by 50%. Further analysis on a sample with x = 0.76 exhibits a clear insulator-metal transition at Tc, indicating the consistency between the electrical and optical measurements. The direct correlation obtained between the carrier density and ferromagnetism - in both electrostatic and chemical doping - using optical and electrical means strongly suggests a carrier-mediated Ruderman-Kittel-Kasuya-Yoshida (RKKY) coupling scenario. Our low-voltage means of manipulating ferromagnetism, and consistency in optical and electrical measurements provides a way to realize exotic quantum states for spintronic and low energy magneto-electronic device applications

Impact of a Mesoporous Titania-Perovskite Interface on the Performance of Hybrid Organic-Inorganic Perovskite Solar Cells.

We report on the optimization of the interfacial properties of titania in mesoscopic CH3NH3PbI3 solar cells. Modification of the mesoporous TiO2 film by TiCl4 treatment substantially reduced the surface traps, as is evident from the sharpness of the absorption edge with a significant reduction in Urbach energy (from 320 to 140 meV) determined from photothermal deflection spectroscopy, and led to an order of magnitude enhancement in the bulk electron mobility and corresponding decrease in the transport activation energy (from 170 to 90 meV) within a device. After optimization of the photoanode-perovskite interface using various sizes of TiO2 nanoparticles, the best photovoltaic efficiency of 16.3% was achieved with the mesoporous TiO2 composed of 36 nm sized nanoparticles. The improvement in device performance can be attributed to the enhanced charge collection efficiency that is driven by improved charge transport in the mesoporous TiO2 layer. Also, the decreased recombination at the TiO2-perovskite interface and better perovskite coverage play important roles.Nava Technology Limited (Ph.D. scholarship), Indo−UK APEX project, Royal Society London (Newton Fellowship), Engineering and Physical Sciences Research Council, King Abdulaziz City for Science and Technology (KACST), CCEM-CH in the 9th call proposal 906: CONNECT PV, Swiss National Science FoundationThis is the author accepted manuscript. The final version is available from the American Chemical Society via http://dx.doi.org/10.1021/acs.jpclett.6b0161

Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices.

One source of instability in perovskite solar cells (PSCs) is interfacial defects, particularly those that exist between the perovskite and the hole transport layer (HTL). We demonstrate that thermally evaporated dopant-free tetracene (120 nm) on top of the perovskite layer, capped with a lithium-doped Spiro-OMeTAD layer (200 nm) and top gold electrode, offers an excellent hole-extracting stack with minimal interfacial defect levels. For a perovskite layer interfaced between these graded HTLs and a mesoporous TiO2 electron-extracting layer, its photoluminescence yield reaches 15% compared to 5% for the perovskite layer interfaced between TiO2 and Spiro-OMeTAD alone. For PSCs with graded HTL structure, we demonstrate efficiency of up to 21.6% and an extended power output of over 550 hours of continuous illumination at AM1.5G, retaining more than 90% of the initial performance and thus validating our approach. Our findings represent a breakthrough in the construction of stable PSCs with minimized nonradiative losses.Cambridge Materials Limite