2,401 research outputs found
Impact of rest-redistribution on fatigue during maximal eccentric knee extensions
Redistributing long inter-set rest intervals into shorter but more frequent rest intervals generally maintains concentric performance, possibly due to improved energy store maintenance. However, eccentric actions require less energy than concentric actions, meaning that shorter but more frequent sets may not affect eccentric actions to the same degree as concentric actions. Considering the increased popularity of eccentric exercise, the current study evaluated the effects of redistributing long inter-set rest periods into shorter but more frequent rest periods during eccentric only knee extensions. Eleven resistance-trained men performed 40 isokinetic unilateral knee extensions at 60°·s-1 with 285 s of total rest using traditional sets (TS; 4 sets of 10 with 95 s inter-set rest) and rest-redistribution (RR; 20 sets of 2 with 15 s inter-set rest). Before and during exercise, muscle oxygenation was measured via near-infrared spectroscopy, and rating of perceived exertion (RPE) was recorded after every 10th repetition. There were no differences between protocols for peak torque (RR, 241.58±47.20 N; TS, 231.64±48.87 N; p=0.396) or total work (RR, 215.26±41.47 J; TS, 209.71±36.02 J; p=0.601), but moderate to large effect sizes existed in later repetitions (6,8,10) with greater peak torque during RR (d=0.66-1.19). For the entire session, RR had moderate effects on RPE (RR, 5.73±1.42; TS, 6.09±1.30; p=0.307; d=0.53) and large effects on oxygen saturation (RR, 5857.4±310.0; TS, 6495.8±273.8; p=0.002, d=2.13). Therefore, RR may maintain peak torque or total work during eccentric exercise, improve oxygen utilization at the muscle, and reduce the perceived effort
Sectoral Changes in the Labour Force over the Period 1961-1980 with Particular Reference to Public Sector and Services Employment. Quarterly Economic Commentary Special Article, August 1982
A knowledge of the significant changes which have been taking place in the
sectoral composition of employment is fundamental to a proper understanding
of the recent evolution of the labour force. This paper traces the changes in the
numbers at work in broad sectors of the Irish economy over the period
1961-80. The basic information is given in Appendix I, Table A which
contains an annual sectoral subdivision under four broad headings (Agriculture,
Manufacturing, Building and Services); Tables 1 and 1A following show
these data for selected years* in this period with a somewhat more detailed
sectoral subdivision, the second table giving absolute and relative employment
changes by sector for the 1961/1971 and 1971/1979 periods
Granular clustering in a hydrodynamic simulation
We present a numerical simulation of a granular material using hydrodynamic
equations. We show that, in the absence of external forces, such a system
phase-separates into high density and low density regions. We show that this
separation is dependent on the inelasticity of collisions, and comment on the
mechanism for this clustering behavior. Our results are compatible with the
granular clustering seen in experiments and molecular dynamic simulations of
inelastic hard disks.Comment: 4 pages, 5 figure
Recent Changes in Irish Fertility. Quarterly Economic Commentary Special Article, May 1984
The main purpose of this paper is to provide a broad description of fertility
trends in Ireland over the last two decades. The analysis investigates in
particular whether there are regional (i.e., county) differences in relation to
the levels of fertility and how these have changed. In the final part of the paper
we discuss the likely future pattern of fertility trends and consider some
economic and social implications arising therefrom. The last-mentioned aspect
is now a matter of considerable significance since there are indications (from
the annual births total) that the general decline in fertility has escalated to
such an extent in recent years that the effects may be quite substantial and
materialise within a relatively short period of time
A Study of Labour Force Flows 1961-80. Quarterly Economic Commentary Special Article, May 1982
A Study of Labour Force Flows
Microscopic Structure of the Calcium Isotopes
This research was sponsored by the National Science Foundation Grant NSF PHY-931478
Load-velocity relationships and predicted maximal strength: A systematic review of the validity and reliability of current methods
Maximal strength can be predicted from the load-velocity relationship (LVR), although it is important to understand methodological approaches which ensure the validity and reliability of these strength predictions. The aim of this systematic review was to determine factors which influence the validity of maximal strength predictions from the LVR, and secondarily to highlight the effects of these factors on the reliability of predictions. A search strategy was developed and implemented in PubMed, Scopus, Web of Science and CINAHL databases. Rayyan software was used to screen titles, abstracts, and full texts to determine their inclusion/eligibility. Eligible studies compared direct assessments of one-repetition maximum (1RM) with predictions performed using the LVR and reported prediction validity. Validity was extracted and represented graphically via effect size forest plots. Twenty-five eligible studies were included and comprised of a total of 842 participants, three different 1RM prediction methods, 16 different exercises, and 12 different velocity monitoring devices. Four primary factors appear relevant to the efficacy of predicting 1RM: the number of loads used, the exercise examined, the velocity metric used, and the velocity monitoring device. Additionally, the specific loads, provision of velocity feedback, use of lifting straps and regression model used may require further consideration
Field deployments of a self-contained subsea platform for acoustic monitoring of the environment around marine renewable energy structurea
The drive towards sustainable energy has seen rapid development of marine renewable energy devices, and current efforts are focusing on wave and tidal stream energy. The NERC/DEFRA collaboration FLOWBEC-4D (Flow, Water column & Benthic Ecology 4D) is addressing the lack of knowledge of the environmental and ecological effects of installing and operating large arrays of wave and tidal energy devices. The FLOWBEC sonar platform combines a number of instruments to record information at a range of physical and multi-trophic levels. Data are recorded at a resolution of several measurements per second, for durations of 2 weeks to capture an entire spring-neap tidal cycle. An upward-facing multifrequency Simrad EK60 echosounder (38, 120 and 200 kHz) is synchronized with an upward-facing Imagenex 837B Delta T multibeam sonar (120° × 20° beamwidth, 260 kHz) aligned with the tidal flow. An ADV is used for local current measurements and a fluorometer is used to measure chlorophyll (as a proxy for plankton) and turbidity. The platform is self-contained with no cables or anchors, facilitating rapid deployment and recovery in high-energy sites and flexibility in allowing baseline data to be gathered. Five 2-week deployments were completed in 2012 and 2013 at wave and tidal energy sites, both in the presence and absence of renewable energy structures. These surveys were conducted at the European Marine Energy Centre, Orkney, UK. Algorithms for noise removal, target detection and target tracking have been written using a combination of LabVIEW, MATLAB and Echoview. Target morphology, behavior and frequency response are used to aid target classification, with concurrent shore-based seabird observations used to ground truth the acoustic data. Using this information, the depth preference and interactions of birds, fish schools and marine mammals with renewable energy structures can be tracked. Seabird and mammal dive profiles, predator-prey interactions a- d the effect of hydrodynamic processes during foraging events throughout the water column can also be analyzed. These datasets offer insights into how fish, seabirds and marine mammals successfully forage within dynamic marine habitats and also whether individuals face collision risks with tidal stream turbines. Measurements from the subsea platform are complemented by 3D hydrodynamic model data and concurrent shore-based marine X-band radar. This range of concurrent fine-scale information across physical and trophic levels will improve our understanding of how the fine-scale physical influence of currents, waves and turbulence at tidal and wave energy sites affect the behavior of marine wildlife, and how tidal and wave energy devices might alter the behavior of such wildlife. Together, the results from these deployments increase our environmental understanding of the physical and ecological effects of installing and operating marine renewable energy devices. These results can be used to guide marine spatial planning, device design, licensing and operation, as individual devices are scaled up to arrays and new sites are considered. The combination of our current technology and analytical approach can help to de-risk the licensing process by providing a higher level of certainty about the behavior of a range of mobile marine species in high energy environments. It is likely that this approach will lead to greater mechanistic understanding of how and why mobile predators use these high energy areas for foraging. If a fuller understanding and quantification can be achieved at single demonstration scales, and these are found to be similar, then the predictive power of the outcomes might lead to a wider strategic approach to monitoring and possibly lead to a reduction in the level of monitoring required at each commercial site
Recommended from our members
Residual stresses and stress corrosion cracking in pipe fittings
Residual stresses can play a key role in the SCC performance of susceptible materials in PWR primary water applications. Residual stresses are stresses stored within the metal that develop during deformation and persist in the absence of external forces or temperature gradients. Sources of residual stresses in pipe fittings include fabrication processes, installation and welding. There are a number of methods to characterize the magnitude and orientation of residual stresses. These include numerical analysis, chemical cracking tests, and measurement (e.g., X-ray diffraction, neutron diffraction, strain gage/hole drilling, strain gage/trepanning, strain gage/section and layer removal, and acoustics). This paper presents 400 C steam SCC test results demonstrating that residual stresses in as-fabricated Alloy 600 pipe fittings are sufficient to induce SCC. Residual stresses present in as-fabricated pipe fittings are characterized by chemical cracking tests (stainless steel fittings tested in boiling magnesium chloride solution) and by the sectioning and layer removal (SLR) technique
Radiofrequency Ablation Resulting in Left Lobe Hypertrophy and Improved Resectability
Surgical resection for colorectal liver metastases may only be considered when an adequate functional residual volume can be preserved. Selective portal venous embolisation may be used to increase this volume, whilst chemotherapy and radiofrequency ablation (RFA) can be used to treat inoperable lesions. A 73-year-old man with liver metastasis proceeded to surgery, with the intention to perform a right hemi-hepatectomy. Unexpectedly at laparotomy, despite adequate pre-operative imaging, both the right and middle hepatic veins were involved. At that time extended right hemi-hepatectomy was contraindicated by insufficient residual volume and RFA was performed. Follow-up imaging revealed atrophy of the lesion. Significantly, there was also left lateral lobe hypertrophy sufficient to permit resection, which was performed without complication. Thrombosis of intra-hepatic portal veins is a recognised complication of RFA but here it appears to have been beneficial. The case highlights the need for regular review of unresectable hepatic disease by a liver surgeon and could suggest new modalities of portal embolisation
- …