111 research outputs found

    SKELETAL AND DENTAL CHANGES INDUCED BY BIONATOR IN EARLY TREATMENT OF CLASS II

    Get PDF
    The purpose was to investigate the amount of skeletal and dentoalveolar changes after early treatment of Class II, Division 1 malocclusion with bionator appliance in prepubertal growing patients. Forty Class II patients (19 male and 21 female) were divided in two groups. Treated group consisted of 20 subjects (10 male and 10 female) treated consecutively with bionator. Mean age at the start of treatment (T0) was 9.1 years, while it was 10.6 years at the end of treatment (T1). Mean treatment time was 17.7 months. Pretreatment and post-treatment cephalometric records of treated group were evaluated and compared with a control group consisted of 20 patients (09 male and 11 female) with untreated Class II malocclusion. Intergroup comparisons were performed using Student’s t-tests and chi-square test with Yates’ correction at a significance level of 5 per cent. Bionator appliance was effective in generating differential growth between the jaws. Cephalometric skeletal measurements ANB, WITS, LAFH, Co-A and dental L6-Mp, U1.Pp, IsIi, OB, OJ showed statistically significantly different from the control. The bionator induced more dentoalveolar changes than skeletal during treatment in prepurbetal stage

    Effect of angiotensin-converting enzyme inhibitor and angiotensin receptor blocker initiation on organ support-free days in patients hospitalized with COVID-19

    Get PDF
    IMPORTANCE Overactivation of the renin-angiotensin system (RAS) may contribute to poor clinical outcomes in patients with COVID-19. Objective To determine whether angiotensin-converting enzyme (ACE) inhibitor or angiotensin receptor blocker (ARB) initiation improves outcomes in patients hospitalized for COVID-19. DESIGN, SETTING, AND PARTICIPANTS In an ongoing, adaptive platform randomized clinical trial, 721 critically ill and 58 non–critically ill hospitalized adults were randomized to receive an RAS inhibitor or control between March 16, 2021, and February 25, 2022, at 69 sites in 7 countries (final follow-up on June 1, 2022). INTERVENTIONS Patients were randomized to receive open-label initiation of an ACE inhibitor (n = 257), ARB (n = 248), ARB in combination with DMX-200 (a chemokine receptor-2 inhibitor; n = 10), or no RAS inhibitor (control; n = 264) for up to 10 days. MAIN OUTCOMES AND MEASURES The primary outcome was organ support–free days, a composite of hospital survival and days alive without cardiovascular or respiratory organ support through 21 days. The primary analysis was a bayesian cumulative logistic model. Odds ratios (ORs) greater than 1 represent improved outcomes. RESULTS On February 25, 2022, enrollment was discontinued due to safety concerns. Among 679 critically ill patients with available primary outcome data, the median age was 56 years and 239 participants (35.2%) were women. Median (IQR) organ support–free days among critically ill patients was 10 (–1 to 16) in the ACE inhibitor group (n = 231), 8 (–1 to 17) in the ARB group (n = 217), and 12 (0 to 17) in the control group (n = 231) (median adjusted odds ratios of 0.77 [95% bayesian credible interval, 0.58-1.06] for improvement for ACE inhibitor and 0.76 [95% credible interval, 0.56-1.05] for ARB compared with control). The posterior probabilities that ACE inhibitors and ARBs worsened organ support–free days compared with control were 94.9% and 95.4%, respectively. Hospital survival occurred in 166 of 231 critically ill participants (71.9%) in the ACE inhibitor group, 152 of 217 (70.0%) in the ARB group, and 182 of 231 (78.8%) in the control group (posterior probabilities that ACE inhibitor and ARB worsened hospital survival compared with control were 95.3% and 98.1%, respectively). CONCLUSIONS AND RELEVANCE In this trial, among critically ill adults with COVID-19, initiation of an ACE inhibitor or ARB did not improve, and likely worsened, clinical outcomes. TRIAL REGISTRATION ClinicalTrials.gov Identifier: NCT0273570

    Ary dos Santos Pinto

    No full text

    Mudanças dimensionais dos arcos dentários em crianças entre 3 e 6 anos de idade

    No full text
    Para o presente trabalho, 235 crianças pertencentes às creches da Prefeitura Municipal de Araraquara foram avaliadas e moldadas com um dispositivo confeccionado com cera utilidade e palito abaixador de língua na forma dos arcos dentários. No intervalo de um ano as mesmas crianças foram remoldadas afim de se verificar se houveram ou não mudanças nas dimensões do arco dentário decíduo. A partir da obtenção dos modelos em gesso, foram realizadas medições por meio de um dispositivo digitalizador tridimensional denominado MicroScribe-3DX nos instantes inicial (primeira moldagem) e final (moldagem após um ano). Foram avaliadas medidas referentes às distâncias inter-segundos molares, interprimeiros molares, intercaninos, perímetro, comprimento de arco e espaços primatas. Consideraram-se ainda dimorfismo sexual, tipo de arco e influência de hábitos. Concluiu-se que as dimensões transversais sofreram aumento significativo na dentadura decídua, enquanto que o perímetro, o comprimento e os espaços primatas permaneceram constantes. As distâncias intermolares apresentaram dimorfismo sexual, com dimensões maiores no gênero feminino. Com relação às medidas de perímetro, comprimento e espaços primatas não ocorreram diferenças significantes em relação ao gênero. As dimensões de comprimento nos arcos não diferem nos arcos decíduos Tipo I e Tipo II de Baume, enquanto que o diâmetro dos arcos Tipo I de Baume, são maiores do que os do Tipo II. Os hábitos de sucção de dedo e chupeta não provocaram alterações nas dimensões dos arcos decíduos no período observado, de um ano.Two hundred and thirty five children enrolled in kindergarden of Araraquara public school system were evalueted and cast models were obtained. For this purpose a special apparatus was confeccioned with utility wax and exam stick following the dental arch form. After an year same children were evaluated again in order to observe possible changes in the primary dental arches. Using the cast models some measurements were acquired by a tridimensional digitalizer, MicroScribe-3DX, on the first and after one year cast models. Second molars, first molars and canine width, arch perimeter, arch length and primate space were evaluated. Gender dimorphism, arch type and finger or pacifier sucking habits were also considered. It was concluded that the transverse measurements showed a significant increase in primary dentition, while the perimeter, arch length and primate spaces were stable. The first and second molars width presented gender dimorphism, with higher values in the females. Considering the perimeter, arch length and primate spaces there were no significant differences according to gender. The arch length dimensions were not different between Baume Type I and II arches, althougth Baume Type I arch width were larger than Type II. Finger and pacifier sucking habits had no effect on primary dentition dimensions during the observed period of one year

    Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

    No full text
    INTRODUCTION:Due to the lack of studies that distinguish between dentoalveolar and basal changes caused by the Thurow appliance, this clinical study, carried out by the School of Dentistry - State University of São Paulo/Araraquara, aimed at assessing the dental and skeletal changes induced by modified Thurow appliance.METHODS:The sample included an experimental group comprising 13 subjects aged between 7 and 10 years old, with Class II malocclusion and anterior open bite, and a control group comprising 22 subjects similar in age, sex and mandibular plane angle. Maxillary/mandibular, horizontal/vertical, dental/skeletal movements (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6) were assessed, based on 14 landmarks, 8 angles (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB) and 3 linear measures (N-Me, ANS-Me, S-Go).RESULTS:Treatment caused significantly greater angle decrease between the palatal and the mandibular plane of the experimental group, primarily due to an increase in the palatal plane angle. ANB, SNA and S-N-ANS angles significantly decreased more in patients from the experimental group. PNS was superiorly remodeled. Lower face height (ANS-Me) decreased in the experimental group and increased in the control group.CONCLUSIONS:The modified Thurow appliance controlled vertical and horizontal displacements of the maxilla, rotated the maxilla and improved open bite malocclusion, decreasing lower facial height.INTRODUÇÃO:devido ao número reduzido de estudos que distinguem entre as mudanças dentoalveolares e ósseas produzidas pelo aparelho de Thurow, esse estudo clínico, conduzido pelo departamento de Ortodontia da Faculdade de Odontologia de Araraquara, foi proposto para avaliar as mudanças dentárias e esqueléticas induzidas pelo aparelho de Thurow modificado.MÉTODOS:a amostra incluiu um grupo experimental de 13 indivíduos, entre 7 e 10 anos de idade, com má oclusão Classe II e mordida aberta anterior, e um grupo controle de 22 indivíduos, com idades, plano mandibular e má oclusão similares. Com base em 14 pontos cefalométricos, 8 ângulos (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB) e 3 medidas lineares (N-Me, ANS-Me, S-Go), foram avaliados movimentos maxilares e mandibulares horizontais e verticais dentários e esqueléticos (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6).RESULTADOS:o tratamento produziu diminuição significativamente maior no ângulo entre o plano palatino e o plano mandibular do grupo controle, devido ao aumento do ângulo do plano palatino. Os ângulos A-N-B, S-N-A e S-N-ANS diminuíram significativamente mais no grupo tratado. A PNS sofreu remodelação superior. A altura facial inferior (ANS-Me) diminuiu no grupo tratado, ao passo que aumentou no grupo controle.CONCLUSÕES:o aparelho controlou deslocamento vertical e horizontal da maxila, rotacionou a maxila para melhorar a mordida aberta e diminuiu a altura facial inferior

    Comparison of space analysis performed on plaster vs. digital dental casts applying Tanaka and Johnston's equation

    No full text
    OBJETIVO: comparar medidas de tamanhos dentários, suas reprodutibilidades e a aplicação da equação de regressão de Tanaka e Johnston na predição do tamanho dos caninos e pré-molares em modelos de gesso e digital. MÉTODOS: trinta modelos de gesso foram escaneados para obtenção dos modelos digitais. As medidas do comprimento mesiodistal dos dentes foram obtidas com paquímetro digital nos modelos de gesso e nos modelos digitais utilizando o software O3d (Widialabs). A somatória do tamanho dos incisivos inferiores foi utilizada para obter os valores de predição do tamanho dos pré-molares e caninos utilizando equação de regressão, e esses valores foram comparados ao tamanho real dos dentes. Os dados foram analisados estatisticamente, aplicando-se aos resultados o teste de correlação de Pearson, a fórmula de Dahlberg, o teste t pareado e a análise de variância (p < 0,05). RESULTADOS: excelente concordância intraexaminador foi observada nas medidas realizadas em ambos os modelos. O erro aleatório não esteve presente nas medidas obtidas com paquímetro, e o erro sistemático foi mais frequente no modelo digital. A previsão de espaço obtida pela aplicação da equação de regressão foi maior que a somatória dos pré-molares e caninos presentes nos modelos de gesso e nos modelos digitais. CONCLUSÃO: apesar da boa reprodutibilidade das medidas realizadas em ambos os modelos, a maioria das medidas dos modelos digitais foram superiores às do modelos de gesso. O espaço previsto foi superestimado em ambos os modelos e significativamente maior nos modelos digitais.OBJECTIVE: The purpose of this study was to compare dental size measurements, their reproducibility and the application of Tanaka and Johnston regression equation in predicting the size of canines and premolars on plaster and digital dental casts. METHODS: Thirty plaster casts were scanned and digitized. Mesiodistal measurements of the teeth were then performed with a digital caliper on the plaster and digital casts using O3d software system (Widialabs©).The sum of the sizes of the lower incisors was used to obtain predictive values of the sizes of the premolars and canines using the regression equation, and these values were compared with the actual sizes of the teeth. The data were statistically analyzed by applying to the results Pearson's correlation test, Dahlberg's formula, paired t-test and analysis of variance (p<0.05). RESULTS: Excellent intraexaminer agreement was observed in the measurements performed on both dental casts. No random error was present in the measurements obtained with the caliper and systematic error (bias) was more frequent in the digital casts. Space prediction obtained by applying the regression equation was greater than the sum of the canines and premolars on the plaster and digital casts. CONCLUSIONS: Despite an adequate reproducibility of the measurements performed on both casts, most measurements on the digital casts were higher than those on the plaster casts. The predicted space was overestimated in both models and significantly higher in the digital casts
    • …
    corecore