Information-Control Software for Handling Serial Devices in an EPICS Environment

Each accelerator control system has a variety of measurement devices. One of the most common types of instrument interfaces used for their control is a serial (RS-232) bus. It is inexpensive and adequate for relatively simple measurement and control devices such as switchers, amplifiers, voltmeters, and steppermotors. Since the RS-232 specification is very broad and does not require uniformity above the basic communication protocol level, one of the major problems associated with the use of RS-232 is that the command protocol for each device is unique. This makes it difficult to design generic drivers for RS-232 and also hampers efforts to design generic troubleshooting methods. This paper presents software developed independently at three other labs and integrated into a single system at Jefferson Lab to handle serial devices in a generic manner. The software is based on the EPICS toolkit and uses a 3-tier architecture including a common serial driver at the bottom, a top-level protocol to specify individual device commands in a generic manner, and a mid-level of software to "glue" the two together.Comment: 3 pages, paper presented at Conference ICALEPCS-2001, San Jose, CA, November, 200

Tactiques individuellement adaptées du traitement de la néphroptose

La néphroptose est une condition de mobilité pathologique du rein, qui transmet sa mobilité physiologique au repos et avec les changements de position du corps humain. Synonyme du nom de la maladie - rein pathologiquement mobile. Elle peut être unilatérale ou bilatérale. Le problème principal et le plus difficile de la néphroptose est de déterminer le type de traitement approprié. À l'heure actuelle, selon les protocoles de traitement, une approche méthodologique de l'élimination progressive de cette pathologie a été établie. Cependant, en urologie, cette maladie a de nombreux points de vue contradictoires sur la fourniture de soins efficaces aux patients atteints de néphroptose. La néphroptose s'accompagne de troubles urodynamiques, qui comprennent le phénomène de dilatation des voies urinaires supérieures, la présence d'une infection secondaire, l'allongement de l'os vasculaire du rein avec le développement ultérieur d'une hypoxie et ses conséquences sur le parenchyme rénal. Il existe de nombreuses causes d'insuffisance rénale. Les antécédents héréditaires, les traumatismes, la perte de poids et la diminution de la pression intra-abdominale n'expliquent pas complètement les causes de l'insuffisance rénale, mais contribuent à la néphroptose. Les caractéristiques anatomiques de la structure de la forme du corps masculin et féminin expliquent le fait que la néphroptose est plus fréquente chez les femmes (en particulier bilatérales) que chez les hommes

HIGH-LEVEL APPLICATION FRAMEWORK FOR LCLS*

each other easily. Also, many components such as Help, A framework for high level accelerator application Search, Cut, Copy and Paste are seamlessly integrated software is being developed for the Linac Coherent Light through the Eclipse framework. Source (LCLS). The framework is based on plug-in technology developed by an open source project, Eclipse. Many existing functionalities provided by Eclipse are available to high-level applications written within this framework. The framework also contains static data storage configuration and dynamic data connectivity. Because the framework is Eclipse-based, it is highly compatible with any other Eclipse plug-ins. The entire infrastructure of the software framework will be presented. Planned applications and plug-ins based on the framework are also presented

Advances on ELIC Design Studies

An electron-ion collider of a center-of-mass energy up to 90 GeV at luminosity up to 1035 cm-2s-1 with both beams highly polarized is essential for exploring the new QCD frontier of strong color fields in nuclear and precisely imaging the sea-quarks and gluons in the nucleon. A conceptual design of a ring-ring collider based on CEBAF (ELIC) with energies up to 9 GeV for electrons/positrons and up to 225 GeV for protons and 100 GeV/u for ions has been proposed to fulfill the science desire and to serve as the next step for CEBAF after the planned 12 GeV energy upgrade of the fixed target program. Here, we summarize recent design progress for the ELIC complex with four interaction points (IP); including interaction region optics with chromatic aberration compensation scheme and complete lattices for the Figure-8 collider rings. Further optimization of crab crossing angles at the IPs, simulations of beam-beam interactions and electron polarization in the Figure-8 ring and its matching at the IPs are also discussed

Electron Bunch Length Measurement for LCLS at SLAC

At Stanford Linear Accelerator Center (SLAC) a Bunch Length Measurement system has been developed to measure the length of the electron bunch for its new Linac Coherent Light Source (LCLS). This destructive measurement uses a transverse-mounted RF deflector (TCAV) to vertically streak the electron beam and an image taken with an insertable screen and a camera. The device control software was implemented with the Experimental Physics and Industrial Control System (EPICS) toolkit. The analysis software was implemented in Matlab{trademark} using the EPICS/Channel Access Interface for Scilab{trademark} and Matlab{trademark} (labCA). This architecture allowed engineers and physicists to develop and integrate their control and analysis without duplication of effort

Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jefferson Lab

This report presents a brief summary of the science opportunities and program of a polarized medium energy electron-ion collider at Jefferson Lab and a comprehensive description of the conceptual design of such a collider based on the CEBAF electron accelerator facility.Comment: 160 pages, ~93 figures This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC05-06OR23177, DE-AC02-06CH11357, DE-AC05-060R23177, and DESC0005823. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purpose

Advances on ELIC Design Studies

A conceptual design of a ring-ring electron-ion collider based on CEBAF with a center-of-mass energy up to 90 GeV at luminosity up to 1035 cm-2s-1 has been proposed at JLab to fulfil science requirements. Here, we summarize design progress including collider ring and interaction region optics with chromatic aberration compensation. Electron polarization in the Figure-8 ring, stacking of ion beams in an accumulator-cooler ring, beam-beam simulations and a faster kicker for the circulator electron cooler ring are also discussed

A compact and cost-effective hard X-ray free-electron laser driven by a high-brightness and low-energy electron beam

We present the first lasing results of SwissFEL, a hard X-ray free-electron laser (FEL) that recently came into operation at the Paul Scherrer Institute in Switzerland. SwissFEL is a very stable, compact and cost-effective X-ray FEL facility driven by a low-energy and ultra-low-emittance electron beam travelling through short-period undulators. It delivers stable hard X-ray FEL radiation at 1-Å wavelength with pulse energies of more than 500 μJ, pulse durations of ~30 fs (root mean square) and spectral bandwidth below the per-mil level. Using special configurations, we have produced pulses shorter than 1 fs and, in a different set-up, broadband radiation with an unprecedented bandwidth of ~2%. The extremely small emittance demonstrated at SwissFEL paves the way for even more compact and affordable hard X-ray FELs, potentially boosting the number of facilities worldwide and thereby expanding the population of the scientific community that has access to X-ray FEL radiation

Gluons and the quark sea at high energies:distributions, polarization, tomography

This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei at high energies, offering unprecedented possibilities for in-depth studies of quantum chromodynamics. This report is organized around four major themes: i) the spin and flavor structure of the proton, ii) three-dimensional structure of nucleons and nuclei in momentum and configuration space, iii) QCD matter in nuclei, and iv) Electroweak physics and the search for physics beyond the Standard Model. Beginning with an executive summary, the report contains tables of key measurements, chapter overviews for each of the major scientific themes, and detailed individual contributions on various aspects of the scientific opportunities presented by an EIC