52 research outputs found
Precision Grasp using an Arm-Hand System as a Hybrid Parallel-Serial System: A Novel Inverse Kinematics Solution
In this letter, we present a novel inverse kinematics (IK) solution for a robotic arm-hand system to achieve precision grasp. This problem is kinematically over-constrained and to address the issue and to solve the problem, we propose a new approach with three key insights. First, we propose a human-inspired thumb-first strategy and consider one finger of the robotic hand as the “thumb” to narrow down the search space and increase the success rate of our algorithm. Second, we formulate the arm-thumb serial chain as a closed chain such that the entire arm-hand system is controlled as a hybrid parallel-serial system. The closed-chain formulation simplifies the task hierarchy of the entire arm-hand system. Third, we attach a virtual revolute joint to the thumb\u27s tip with its rotation axis aligning with the thumb\u27s contact normal The virtual joint will embody the thumb\u27s functional redundancy. By selecting the thumb\u27s joints including the added virtual revolute joint as active joints of the arm-thumb closed chain, the arm-thumb system\u27s self-motion (i.e., the palm pose) and the thumb\u27s functional redundancy can be directly controlled without using the null space projection. This provides a new possibility to control the self-motion of arm-hand systems. Simulation results will demonstrate the advantages and superior performance of the proposed approach for achieving precision grasp compared to other classical approaches
Precision Grasp Planning for Integrated Arm-Hand Systems
The demographic shift has caused labor shortages across the world, and it seems inevitable to rely on robots more than ever to fill the widening gap in the workforce. The robotic replacement of human workers necessitates the ability of autonomous grasping as the most natural but rather a vital part of almost all activities. Among different types of grasping, fingertip grasping attracts much attention because of its superior performance for dexterous manipulation. This thesis contributes to autonomous fingertip grasping in four areas including hand-eye calibration, grasp quality evaluation, inverse kinematics (IK) solution of robotic arm-hand systems, and simultaneous achievement of grasp planning and IK solution.
To initiate autonomous grasping, object perception is the first needed step. Stereo cameras are well-embraced for obtaining an object\u27s 3D model. However, the data acquired through a camera is expressed in the camera frame while robots only accept the commands encoded in the robot frame. This dilemma necessitates the calibration between the robot (hand) and the camera (eye) with the main goal is of estimating the camera\u27s relative pose to the robot end-effector so that the camera-acquired measurements can be converted into the robot frame. We first study the hand-eye calibration problem and achieve accurate results through a point set matching formulation. With the object\u27s 3D measurements expressed in the robot frame, the next step is finding an appropriate grasp configuration (contact points + contact normals) on the object\u27s surface. To this end, we present an efficient grasp quality evaluation method to calculate a popular wrench-based quality metric which measures the minimum distance between the wrench space origin () to the boundary of grasp wrench space (GWS). The proposed method mathematically expresses the exact boundary of GWS, which allows to evaluate the quality of the grasp with the speed that is desirable in most robotic applications. Having obtained a suitable grasp configuration, an accurate IK solution of the arm-hand system is required to perform the planned grasp. Conventionally, the IK of the robotic hand and arm are solved sequentially, which often affects the efficiency and accuracy of the IK solutions. To overcome this problem, we kinematically integrate the robotic arm and hand and propose a human-inspired Thumb-First strategy to narrow down the search space of the IK solution. Based on the Thumb-First strategy, we propose two IK solutions. Our first solution follows a hierarchical IK strategy, while our second solution formulates the arm-hand system as a hybrid parallel-serial system to achieve a higher success rate. Using these results, we propose an approach to integrate the process of grasp planning and IK solution by following a special-designed coarse-to-fine strategy to improve the overall efficiency of our approach
A New Approach for Grasp Quality Calculation using Continuous Boundary Formulation of Grasp Wrench Space
In this paper, we aim to use a continuous formulation to efficiently calculate the well-known wrench-based grasp metric proposed by Ferrari and Canny which is the minimum distance from the wrench space origin to the boundary of the grasp wrench space. Considering the L∞ role= presentation style= box-sizing: border-box; margin: 0px; padding: 0px; display: inline-block; line-height: normal; font-size: 16.200000762939453px; word-spacing: normal; word-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; position: relative; \u3e metric and the nonlinear friction cone model, the challenge of calculating this metric is to determine the boundary of the grasp wrench space. Instead of relying on convex hull construction, we propose to formulate the boundary of the grasp wrench space as continuous functions. By doing so, the problem of grasp quality calculation can be efficiently solved as typical least-square problems and it can be easily implemented by employing off-the-shelf optimization algorithms. Numerical tests will demonstrate the advantages of the proposed formulation compared to the conventional convex hull-based methods
Solving for Dispersivity in Field Dispersion Test of Unsteady Flow in Mixing Flow Field: Mass Transport Modeling
AbstractA combined groundwater flow and mass transport model was constructed to simulate the migration of contaminants and to obtain dispersion parameters from a field dispersion test in unsteady flow in mixing flow field in groundwater. Aquifer parameters were obtained by a pumping test. Tracer tests were carried out in order to characterize the characteristics of groundwater flow and to determine the velocity of the pollutant diffusion process from the source to the pumping well. Groundwater head and velocity were analyzed in the groundwater flow model and the total dissolved solids (TDS) concentration was computed in the mass transport model. The observed drawdown and the observed TDS concentration were found to respectively match closely with the computed drawdown and TDS concentration
Topology control of VANET based on the multi-radio in vehicle and traffic flow in road network
Za pokretnu mrežu interneta (Vehicular Ad Hoc Networks, VANET), određivanje resursa, pravila industrije transporta i potreba održavanja, rad daje sigurnu i učinkovitu topologiju mobilnog interneta i dizajnira multi-radio čvorove u vozilu, a zatim izrađuje algoritam optimizacije kolonije mrava usmjeren virtualnoj sili kroz topologiju izvornog pristupa kako bi stvorio abstraktnu cestovnu mrežu. Na osnovu tih ideja, gradimo postupak umrežavanja i održavanja u pojedinim dijelovima. Konačno provjeravamo izvedivost i učinkovitost strategije kontrole topologije VANET-a zasnovanu na multi-radiju u vozilu i toku prometa na cestovnoj mreži kroz simulirani eksperiment.For mobile internet network (Vehicular Ad Hoc Networks, VANET), resources allocation, transportation industry regulations and service business requirements, this paper builds a stable and efficient mobile internet topology and designs multi-radio nodes in vehicle, and then raises the virtual-force oriented ant colony optimization algorithm through primal approach topology to abstract road network. Based on these ideas, we design the process of networking and maintenance in sections. Finally, we verify the feasibility and effectiveness of topology control strategy of VANET based on the multi-radio in vehicle and traffic flow in road network through the simulation experiment
The multiplexed light storage of Orbital Angular Momentum based on atomic ensembles
The improvement of the multi-mode capability of quantum memory can further
improve the utilization efficiency of the quantum memory and reduce the
requirement of quantum communication for storage units. In this letter, we
experimentally investigate the multi-mode light multiplexing storage of orbital
angular momentum (OAM) mode based on rubidium vapor, and demultiplexing by a
photonic OAM mode splitter which combines a Sagnac loop with two dove prisms.
Our results show a mode extinction ratio higher than 80 at 1 s of
storage time. Meanwhile, two OAM modes have been multiplexing stored and
demultiplexed in our experimental configuration. We believe the experimental
scheme may provide a possibility for high channel capacity and multi-mode
quantum multiplexed quantum storage based on atomic ensembles
Recommended from our members
Association of increased Treg and Th17 with pathogenesis of moyamoya disease
Immuno-inflammation has been shown to play a pivotal role in the pathogenesis of moyamoya disease (MMD). However, how did circulating Treg/Th17 cells involve in MMD patients remains unclear. 26 MMD, 21 atherothrombotic stroke, and 32 healthy controls were enrolled in this study. MMD patients have a significantly higher percentage of circulating Treg and Th17 cells as well as their dominantly secreting cytokines than other groups (P < 0.0001), whereas no difference was found in the ratio of Treg/Th17 between patients in MMD and atherothrombotic stroke group or control subjects (P = 0.244). However, the increased Treg in MMD patients which were enriched with FrIII Treg cells had deficient suppressive functions (P = 0.0017) compared to healthy volunteers. There was a positive correlation between Treg or TGF-β and MMD Suzuki’s stage. And the level of circulating Treg was as an independent factor associated with MMD stage. Besides, TGF-β was also correlated with the increased expression of VEGF in MMD patients. Our findings indicated an important involvement of circulating Treg in the pathogenic development of MMD and TGF-β in Treg induced VEGF
Autophagy biomarkers in CSF correlates with infarct size, clinical severity and neurological outcome in AIS patients
- …