7,458 research outputs found
Insight on Shallow Trap States-Introduced Photocathodic Performance in n-Type Polymer Photocatalysts
Graphitic carbon nitride (g-C3N4) is a robust organic semiconductor photocatalyst with proven H2 evolution ability. However, its application in a photoelectrochemical system as a photocathode for H2 production is extremely challenging with the majority of reports representing it as a photoanode. Despite research into constructing g-C3N4 photocathodes in recent years, factors affecting an n-type semiconductor’s properties as a photocathode are still not well-understood. The current work demonstrates an effective strategy to transform an n-type g-C3N4 photoanode material into an efficient photocathode through introducing electron trap states associated with both N-defects and C–OH terminal groups. As compared to the g-C3N4 photoelectrode, this strategy develops 2 orders of magnitude higher conductivity and 3 orders of magnitude longer-lived shallow-trapped charges. Furthermore, the average OCVD lifetime observed for def-g-C3N4 is 5 times longer than that observed for g-C3N4. Thus, clear photocathode behavior has been observed with negative photocurrent densities of around −10 μA/cm2 at 0 V vs RHE. Open circuit photovoltage decay (OCVD), Mott–Schottky (MS) plot, and transient absorption spectroscopy (TAS) provide consistent evidence that long-lived shallow-trapped electrons that exist at about the microsecond time scale after photoexcitation are key to the photocathode behavior observed for defect-rich g-C3N4, thus further demonstrating g-C3N4 can be both a photoanode and a photocathode candidate
Development of a Robust PET-RAFT Polymerization Using Graphitic Carbon Nitride (g-C3N4)
The metal-free semiconductor, graphitic carbon nitride (g-C3N4), was introduced into RAFT polymerization for the first time. The production of linear polyacrylate and polyacrylamide has been achieved via PET-RAFT polymerization using g-C3N4 as a photoactive organocatalyst without prior deoxygenation. The resulting polymers display controlled molecular weights, narrow polymer dispersities, and high end-group fidelity as exemplified by 1H NMR analysis, MALDI-TOF-MS measurement, and chain extension experiment. Temporal control is illustrated by intermittent light and dark cycles, with polymer growth arrested in the absence of irradiation. The effects of changing RAFT agents (i.e., trithiocarbonates), solvents, catalyst concentrations, and degrees of polymerization in this system have been investigated. The successful polymerization of nonpurified monomer (i.e., still containing radical inhibitors) demonstrates the robust nature of the presented PET-RAFT system
Ru and RuOx decorated carbon nitride for efficient ammonia photosynthesis
Photocatalytic ammonia synthesis is a promising strategy for sustainable development compared to the energy-intensive industrial Haber-Bosch approach. Herein, a ternary heterostructure that consists of ruthenium species and carbon nitride (C3N4) was rationally explored for ammonia photosynthesis. Compared to the small ammonia yield from the g-C3N4 and Ru/g-C3N4 system, the Ru/RuO2/g-C3N4 system represents 6 times higher activity with excellent stability under full-spectrum irradiation. Such an enhancement is not only due to efficient transfer of electrons and holes to Ru and RuO2, respectively, facilitating both the reduction and oxidation reaction, but also taking advantage of Ru for N[triple bond, length as m-dash]N activation
Anisotropic superconducting properties of aligned SmLaFeAsOF microcrystalline powder
The SmLaFeAsOF compound is a quasi-2D
layered superconductor with a superconducting transition temperature T = 52
K. Due to the Fe spin-orbital related anisotropic exchange coupling
(antiferromagnetic or ferromagnetic fluctuation), the tetragonal
microcrystalline powder can be aligned at room temperature using the
field-rotation method where the tetragonal -plane is parallel to the
aligned magnetic field B and -axis along the rotation axis.
Anisotropic superconducting properties with anisotropic diamagnetic ratio
2.4 + 0.6 was observed from low field susceptibility
(T) and magnetization M(B). The anisotropic low-field phase diagram
with the variation of lower critical field gives a zero-temperature penetration
depth (0) = 280 nm and (0) = 120 nm. The magnetic
fluctuation used for powder alignment at 300 K may be related with the pairing
mechanism of superconductivity at lower temperature.Comment: 4 pages, 6 figure
Fundamental considerations of three-level DC-DC converters : topologies, analyses, and control
Author name used in this publication: Chi K. Tse2008-2009 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
The effect of gamma irradiation on the biological properties of intervertebral disc allografts: in vitro and in vivo studies in a beagle model
published_or_final_versio
Treatment effect of Bushen Huayu extract on postmenopausal osteoporosis in vivo
Bushen Huayu extract (BSHY), a traditional Chinese medicine, has been demonstrated to treat postmenopausal osteoporosis, however, the underlying mechanism remains to be fully elucidated. The aim of the present study was to investigate the therapeutic effect of BSHY and the mechanisms underlying this effect in an in vivo postmenopausal osteoporosis animal model. A total of 1 g BSHY containing 7.12 μg icariin was prepared. Low-dose BSHY (BSHY-L; 11.1 g/kg), medium-dose BSHY (BSHY-M; 22.2 g/kg) and high-dose BSHY (BSHY-H; 44.4 g/kg) was administered to oophorectomized rats using intragastric infusion. Estradiol (E2), interleukin-6 (IL-6) and serum alkaline phosphatase (ALP) levels, as well as bone density, were determined. It was found that the levels of serum ALP in the BSHY-L, BSHY-M and BSHY-H groups (197.75±41.74, 166.63±44.83 and 165.63±44.90 IU/l, respectively) were significantly decreased compared with the model group (299.13±45.79 IU/l; P<0.05), whilst the levels of E2 (16.89±1.71, 17.95±1.40 and 18.34±1.43 pg/ml, respectively) increased compared with the model group (14.54±1.61; P<0.05). In addition, the levels of IL-6 decreased in the BSHY-L, BSHY-M and BSHY-H groups (91.85±14.81, 82.99±15.65 and 80.54±14.61 pg/ml, respectively) compared with the model group (105.93±16.50 pg/ml; P<0.05). Furthermore, it was demonstrated that BSHY increased the bone density in the BSHY-L, BSHY-M and BSHY-H groups (0.20±0.014, 0.22±0.016 and 0.22±0.017 g/cm2, respectively) compared with the model group (0.19±0.011 g/cm2; P<0.05). BSHY was also found to increase the number of osteoblasts in the BSHY-L, BSHY-M and BSHY-H groups (25.38±2.17, 29.25±2.12 and 30.00±2.39, respectively), compared with in the model group (14.75±2.38; P<0.05), and decrease the number of osteoclasts in the BSHY-L, BSHY-M and BSHY-H groups (4.00±1.85, 4.25±1.39 and 5.75±1.49, respectively) compared with 9.50±1.60 observed in the model group (P<0.05). These results suggest that BSHY is a potential therapeutic drug for the treatment of osteoporosis in vivo. Furthermore, these results suggest that the mechanism by which BSHY decreases the serum levels of IL-6 may be by regulating E2.published_or_final_versio
- …