New information on olenelline trilobites from the Early Cambrian Sekwi Formation, Northwestern Canada

This is the author's accepted manuscript, the published version is available at http://www.nrcresearchpress.com/doi/abs/10.1139/E10-073#.U21JO4FdXUL .A new species of olenelline trilobite, Nevadella keelensis, is described from the Early Cambrian (Cambrian Series 2, Stage 3) in the Sekwi Formation, Mackenzie Mountains, Canada. The difficulty in discerning between Nevadia Walcott, 1910 and Nevadella Raw, 1936 is discussed, and a revision of the two genera is suggested, particularly with the addition of Nevadella keelensis n. sp. A holmiid trilobite, perhaps conspecific with Esmeraldina rowei (Walcott, 1910), was also confirmed from the same locality. The E. sp. aff. rowei represents the narrow form of a species known for great variability in cephalic form. The trilobite material comes from a low diversity, shallow water, peritidal facies that was not sampled in previous studies of Cambrian fossils in the area, and could prove useful in facilitating biostratigraphic correlation across the Selwyn Basin and with other parts of Laurentia as well

New olenelline trilobites from the Northwest Territories, Canada, and the phylogenetic placement of Judomia absita

This is the author's accepted manuscript, the published version is available here http://www.mapress.com/zootaxa/2011/f/z02918p028f.pdfThe Early Cambrian olenelline trilobites are a diverse clade that have been the subject of several phylogenetic analyses. Here, three new species of Bradyfallotaspis Fritz, 1972 (B. coriae, B. nicolascagei, and B. sekwiensis) and one new species of Nevadia Walcott, 1910 (N. saupeae) are described from the Sekwi Formation of the Mackenzie Mountains, Northwest Territories, Canada. In addition, new specimens potentially referable to Nevadia ovalis were recovered that may expand that species’ geographic range, which was thought to be restricted to Sonora, Mexico. A phylogenetic analysis incorporating several olenelline taxa, including Judomia absita from the Sekwi Formation, is also presented herein. This species has been assigned to various olenelline genera, including Judomia Lermontova, 1951 and Paranevadella Palmer & Repina, 1993. Phylogenetic analysis suggests this species is closely related to Judomia tera Lazarenko, 1960 from Siberia. This phylogenetic relationship provides further support for the hypothesis that a close biogeographic relationship existed between Laurentia and Siberia during the Cambrian

Factors contributing to the temperature beneath plaster or fiberglass cast material

<p>Abstract</p> <p>Background</p> <p>Most cast materials mature and harden via an exothermic reaction. Although rare, thermal injuries secondary to casting can occur. The purpose of this study was to evaluate factors that contribute to the elevated temperature beneath a cast and, more specifically, evaluate the differences of modern casting materials including fiberglass and prefabricated splints.</p> <p>Methods</p> <p>The temperature beneath various types (plaster, fiberglass, and fiberglass splints), brands, and thickness of cast material were measured after they were applied over thermometer which was on the surface of a single diameter and thickness PVC tube. A single layer of cotton stockinette with variable layers and types of cast padding were placed prior to application of the cast. Serial temperature measurements were made as the cast matured and reached peak temperature. Time to peak, duration of peak, and peak temperature were noted. Additional tests included varying the dip water temperature and assessing external insulating factors. Ambient temperature, ambient humidity and dip water freshness were controlled.</p> <p>Results</p> <p>Outcomes revealed that material type, cast thickness, and dip water temperature played key roles regarding the temperature beneath the cast. Faster setting plasters achieved peak temperature quicker and at a higher level than slower setting plasters. Thicker fiberglass and plaster casts led to greater peak temperature levels. Likewise increasing dip-water temperature led to elevated temperatures. The thickness and type of cast padding had less of an effect for all materials. With a definition of thermal injury risk of skin injury being greater than 49 degrees Celsius, we found that thick casts of extra fast setting plaster consistently approached dangerous levels (greater than 49 degrees for an extended period). Indeed a cast of extra-fast setting plaster, 20 layers thick, placed on a pillow during maturation maintained temperatures over 50 degrees of Celsius for over 20 minutes.</p> <p>Conclusion</p> <p>Clinicians should be cautious when applying thick casts with warm dip water. Fast setting plasters have increased risk of thermal injury while brand does not appear to play a significant role. Prefabricated fiberglass splints appear to be safer than circumferential casts. The greatest risk of thermal injury occurs when thick casts are allowed to mature while resting on pillow.</p

Lung Cancer and Cardiovascular Disease Mortality Associated with Ambient Air Pollution and Cigarette Smoke: Shape of the Exposure–Response Relationships

Background: Lung cancer and cardiovascular disease (CVD) mortality risks increase with smoking, secondhand smoke (SHS), and exposure to fine particulate matter < 2.5 μm in diameter (PM2.5) from ambient air pollution. Recent research indicates that the exposure–response relationship for CVD is nonlinear, with a steep increase in risk at low exposures and flattening out at higher exposures. Comparable estimates of the exposure–response relationship for lung cancer are required for disease burden estimates and related public health policy assessments

Cellulose nanocrystals in smart and stimuli-responsive materials: a review

“Smart” stimuli-responsive materials have been the subject of decades of research because of their versatility and particularly their use in medical and sensing applications. While these materials are often composed exclusively of responsive polymers, there is growing interest in smart hybrid systems that contain at least two distinct components, each contributing uniquely to the final material. Cellulose nanocrystals (CNCs) have found extensive application in smart hybrid systems, as CNCs can both contribute to the mechanical and optical properties of the system and bear stimuli-responsive surface modifications. This review covers the recent body of work on CNC-containing smart hybrid systems, with attention given to the fabrication methodologies that have been employed to generate both physically and optically adaptable CNC-based smart systems. Additionally, the unique application of CNCs in self-healing composites and shape memory polymers will be discussed.Natural Sciences and Engineering Research Council of Canad

Indirect adjustment for multiple missing variables applicable to environmental epidemiology

AbstractObjectivesDevelop statistical methods for survival models to indirectly adjust hazard ratios of environmental exposures for missing risk factors.MethodsA partitioned regression approach for linear models is applied to time to event survival analyses of cohort study data. Information on the correlation between observed and missing risk factors is obtained from ancillary data sources such as national health surveys. The relationship between the missing risk factors and survival is obtained from previously published studies. We first evaluated the methodology using simulations, by considering the Weibull survival distribution for a proportional hazards regression model with varied baseline functions, correlations between an adjusted variable and an adjustment variable as well as selected censoring rates. Then we illustrate the method in a large, representative Canadian cohort of the association between concentrations of ambient fine particulate matter and mortality from ischemic heart disease.ResultsIndirect adjustment for cigarette smoking habits and obesity increased the fine particulate matter-ischemic heart disease association by 3%–123%, depending on the number of variables considered in the adjustment model due to the negative correlation between these two risk factors and ambient air pollution concentrations in Canada. The simulations suggested that the method yielded small relative bias (<40%) for most cohort designs encountered in environmental epidemiology.ConclusionsThis method can accommodate adjustment for multiple missing risk factors simultaneously while accounting for the associations between observed and missing risk factors and between missing risk factors and health endpoints