39 research outputs found
Design and Computational Validation of a Shear Stress Bioreactor for Conditioning Vascular Tissue to Time-Varying Multidirectional Fluid Shear Stress
Design and Computational Validation of a Shear Stress Bioreactor for Conditioning Vascular Tissue to Time-Varying Multidirectional Fluid Shear Stress
Author: Rajeshwari Raja Mentor: Dr. Jason A. Shar Department of Mechanical Engineering Kennesaw State University 1100 South Marietta Pkwy SE, 30060
Altered biological environments and conditions, such as microgravity and pregnancy, can impact vascular blood flow and, in turn, generate fluid wall shear stress (WSS; frictional force generated on the tissue surface due to blood flow) abnormalities. These abnormalities are known to affect cardiovascular tissue biology and can be replicated experimentally using a cone-and-plate shear stress bioreactor. This device exposes tissue samples mounted on a stationary place to native WSS signals via angular rotation of a cone submerged in culture medium. However, bubble formation on the tissue surface due to the moving fluid is a serious issue which may impede WSS exposure. A larger fluid volume may mitigate these issues while still transmitting the desired signal to the samples. The current study aimed to computationally characterize the impact of increasing the fluid volume within the bioreactor to mitigate bubble formation. The fluid domain was constructed based on a cone radius and angle of 40 mm and 0.5°, respectively, a plate radius of 41 mm, and an initial gap of 0.2 mm between the cone apex and plate. Based on motor requirements from theoretical torque calculations, three additional geometries were constructed by increasing the gap height to 1, 3, and 5 mm to test the ability of the device to replicate the desired WSS waveforms. Computational fluid dynamic simulations were performed using ANSYS Fluent to validate the operating conditions and design. We anticipate that this design will allow for exposure of native WSS on the tissue samples while alleviating bubble formation
Hemodynamics and Mechanobiology of Aortic Valve Inflammation and Calcification
Cardiac valves function in a mechanically
complex environment, opening and closing close to
a billion times during the average human lifetime,
experiencing transvalvular pressures and pulsatile
and oscillatory shear stresses, as well as bending
and axial stress. Although valves were originally thought to be
passive pieces of tissue, recent evidence points
to an intimate interplay between the hemodynamic
environment and biological response of the valve.
Several decades of study have been devoted to
understanding these varied mechanical stimuli and
how they might induce valve pathology. Here, we
review efforts taken in understanding the valvular
response to its mechanical milieu and key
insights gained from in vitro and
ex vivo whole-tissue studies in
the mechanobiology of aortic valve remodeling,
inflammation, and calcification
An Ex Vivo Study of the Biological Properties of Porcine Aortic Valves in Response to Circumferential Cyclic Stretch
Normal physiological mechanical forces cause constant tissue renewal in aortic valve leaflets (AVL) while altered mechanical forces incite changes in their structural and biological properties. The current study aims at characterizing the remodeling properties of AVL subjected to cyclic circumferential stretch in a sterile ex vivo bioreactor. The leaflets cultured were stretched at a maximum rate of 300%s(−1) corresponding to a 15% strain for 48 h. Collagen, sulfated glycosaminoglycan (sGAG), and elastin contents of the stretched, fresh, and statically incubated leaflets were measured. Cusp morphology and cell phenotype were also examined. AVLs exposed to cyclic stretch showed a significant increase in collagen content (p < 0.05) when compared to fresh and statically incubated AVLs. sGAG content was significantly reduced in the stretched AVLs (p < 0.05) when compared to the fresh leaflets and was comparable between stretched and statically incubated AVLs. There was no statistically significant change in elastin content in all the three groups of AVLs (p > 0.05). Native aortic valve morphology was well preserved in stretched leaflets. Immunohistochemistry and immunoblotting studies showed an increased expression of α-smooth muscle actin (α-SMA) in stretched leaflets while α-SMA expression was reduced in statically incubated AVLs when compared to the fresh leaflets. To conclude, circumferential cyclic stretch altered the extracellular matrix remodeling activity of valvular cells, and consequently the extracellular matrix composition of the AVLs. Most interestingly, the contractile and fibrotic phenotypic expression of valve interstitial cells was enhanced. These results show that circumferential cyclic stretch is a possible mediator for AVL remodeling activity
Atherogenic potential of microgravity hemodynamics in the carotid bifurcation: a numerical investigation
Long-duration spaceflight poses multiple hazards to human health, including physiological changes associated with microgravity. The hemodynamic adaptations occurring upon entry into weightlessness have been associated with retrograde stagnant flow conditions and thromboembolic events in the venous vasculature but the impact of microgravity on cerebral arterial hemodynamics and function remains poorly understood. The objective of this study was to quantify the effects of microgravity on hemodynamics and wall shear stress (WSS) characteristics in 16 carotid bifurcation geometries reconstructed from ultrasonography images using computational fluid dynamics modeling. Microgravity resulted in a significant 21% increase in flow stasis index, a 22–23% decrease in WSS magnitude and a 16–26% increase in relative residence time in all bifurcation branches, while preserving WSS unidirectionality. In two anatomies, however, microgravity not only promoted flow stasis but also subjected the convex region of the external carotid arterial wall to a moderate increase in WSS bidirectionality, which contrasted with the population average trend. This study suggests that long-term exposure to microgravity has the potential to subject the vasculature to atheroprone hemodynamics and this effect is modulated by subject-specific anatomical features. The exploration of the biological impact of those microgravity-induced WSS aberrations is needed to better define the risk posed by long spaceflights on cardiovascular health
Wall Shear Stress Directional Abnormalities in BAV Aortas: Toward a New Hemodynamic Predictor of Aortopathy?
The bicuspid aortic valve (BAV) generates wall shear stress (WSS) abnormalities in the ascending aorta (AA) that may be responsible for the high prevalence of aortopathy in BAV patients. While previous studies have analyzed the magnitude and oscillatory characteristics of the total or streamwise WSS in BAV AAs, the assessment of the circumferential component is lacking despite its expected significance in this highly helical flow environment. This gap may have hampered the identification of a robust hemodynamic predictor of BAV aortopathy. The objective of this study was to perform a global and component-specific assessment of WSS magnitude, oscillatory and directional characteristics in BAV AAs. The WSS environments were computed in the proximal and middle convexity of tricuspid aortic valve (TAV) and BAV AAs using our previous valve-aorta fluid-structure interaction (FSI) models. Component-specific WSS characteristics were investigated in terms of temporal shear magnitude (TSM) and oscillatory shear index (OSI). WSS directionality was quantified in terms of mean WSS vector magnitude and angle, and angular dispersion index (Dα). Local WSS magnitude and multidirectionality were captured in a new shear magnitude and directionality index (SMDI) calculated as the product of the mean WSS magnitude and Dα. BAVs subjected the AA to circumferential TSM overloads (2.4-fold increase vs. TAV). TAV and BAV AAs exhibited a unidirectional circumferential WSS (OSI < 0.04) and an increasingly unidirectional longitudinal WSS between the proximal (OSI > 0.21) and middle (OSI < 0.07) sections. BAVs generated mean WSS vectors skewed toward the anterior wall and WSS angular distributions exhibiting decreased uniformity in the proximal AA (0.27-point increase in Dα vs. TAV). SMDI was elevated in all BAV AAs but peaked in the proximal LR-BAV AA (3.6-fold increase vs. TAV) and in the middle RN-BAV AA (1.6-fold increase vs. TAV). This analysis demonstrates the significance of the circumferential WSS component and the existence of substantial WSS directional abnormalities in BAV AAs. SMDI abnormality distributions in BAV AAs follow the morphotype-dependent occurrence of dilation in BAV AAs, suggesting the predictive potential of this metric for BAV aortopathy
Discrete Subaortic Stenosis: Perspective Roadmap to a Complex Disease
Discrete subaortic stenosis (DSS) is a congenital heart disease that results in the formation of a fibro-membranous tissue, causing an increased pressure gradient in the left ventricular outflow tract (LVOT). While surgical resection of the membrane has shown some success in eliminating the obstruction, it poses significant risks associated with anesthesia, sternotomy, and heart bypass, and it remains associated with a high rate of recurrence. Although a genetic etiology had been initially proposed, the association between DSS and left ventricle (LV) geometrical abnormalities has provided more support to a hemodynamic etiology by which congenital or post-surgical LVOT geometric derangements could generate abnormal shear forces on the septal wall, triggering in turn a fibrotic response. Validating this hypothetical etiology and understanding the mechanobiological processes by which altered shear forces induce fibrosis in the LVOT are major knowledge gaps. This perspective paper describes the current state of knowledge of DSS, articulates the research needs to yield mechanistic insights into a significant pathologic process that is poorly understood, and proposes several strategies aimed at elucidating the potential mechanobiological synergies responsible for DSS pathogenesis. The proposed roadmap has the potential to improve DSS management by identifying early targets for prevention of the fibrotic lesion, and may also prove beneficial in other fibrotic cardiovascular diseases associated with altered flow
Role of Hemodynamic Shear Stress Abnormalities in the Early Pathogenesis of Bicuspid Aortic Valve Calcification
Flow Characterization and Modeling of Cartilage Development in a Spinner-Flask Bioreactor
Bioreactors are devices used for the growth of tissues in a laboratory environment. They exist in many different forms, each designed to enable the production of high-quality tissues. The dynamic environment within bioreactors is known to significantly affect the growth and development of the tissue. Chondrocytes, the building blocks of articular cartilage, for example, are stimulated by mechanical stresses such as shear, as compared with those in tissues grown under static incubation conditions. On the other hand, high shear can damage cells. Consequently the shear-stress level has to be controlled in order to optimize the design and the operating conditions of bioreactors.
Spinner flasks have been used for the production of articular cartilage in vitro. Assuming the existence of a relation between the cellular glycosaminoglycan (GAG) synthesis and the local shear stresses on the construct surfaces, this research focuses on the development of a model for cartilage growth in such devices. The flow produced in a model spinner flask is characterized experimentally using particle-image velocimetry (PIV). A computational fluid dynamic (CFD) model validated with respect to the laboratory measurements is constructed in order to predict the local shear stresses on the construct surfaces. Tissue growth experiments conducted in the prototype bioreactor permit construct histologies and GAG contents to be analyzed and then correlated with the shear-stress predictions. The integration of this relation into the CFD model enables the prediction of GAG synthesis through convective effects. Coupling this convective model to an existing diffusive model produces a complete cartilage-growth model for use in aiding the optimization of existing bioreactors, and in the design of new ones.Ph.D.Committee Chair: Neitzel, G. Paul; Committee Member: Guldberg, Robert E.; Committee Member: Smith, Marc K.; Committee Member: Vunjak-Novakovic, Gordana; Committee Member: Yeung, Pui-Kue