23 research outputs found
Compressive loading of the murine tibia reveals site-specific micro-scale differences in adaptation and maturation rates of bone
Loading increases bone mass and strength in a site-specific manner; however, possible effects of loading on bone matrix composition have not been evaluated. Site-specific structural and material properties of mouse bone were analyzed on the macro- and micro/molecular scale in the presence and absence of axial loading. The response of bone to load is heterogeneous, adapting at molecular, micro-, and macro-levels. INTRODUCTION: Osteoporosis is a degenerative disease resulting in reduced bone mineral density, structure, and strength. The overall aim was to explore the hypothesis that changes in loading environment result in site-specific adaptations at molecular/micro- and macro-scale in mouse bone. METHODS: Right tibiae of adult mice were subjected to well-defined cyclic axial loading for 2 weeks; left tibiae were used as physiologically loaded controls. The bones were analyzed with μCT (structure), reference point indentation (material properties), Raman spectroscopy (chemical), and small-angle X-ray scattering (mineral crystallization and structure). RESULTS: The cranial and caudal sites of tibiae are structurally and biochemically different within control bones. In response to loading, cranial and caudal sites increase in cortical thickness with reduced mineralization (-14 and -3%, p < 0.01, respectively) and crystallinity (-1.4 and -0.3%, p < 0.05, respectively). Along the length of the loaded bones, collagen content becomes more heterogeneous on the caudal site and the mineral/collagen increases distally at both sites. CONCLUSION: Bone structure and composition are heterogeneous, finely tuned, adaptive, and site-specifically responsive at the micro-scale to maintain optimal function. Manipulation of this heterogeneity may affect bone strength, relative to specific applied loads
The Effect of the CO32- to Ca2+ Ion activity ratio on calcite precipitation kinetics and Sr2+ partitioning
<p>Abstract</p> <p>Background</p> <p>A proposed strategy for immobilizing trace metals in the subsurface is to stimulate calcium carbonate precipitation and incorporate contaminants by co-precipitation. Such an approach will require injecting chemical amendments into the subsurface to generate supersaturated conditions that promote mineral precipitation. However, the formation of reactant mixing zones will create gradients in both the saturation state and ion activity ratios (i.e., <inline-formula><m:math name="1467-4866-13-1-i1" xmlns:m="http://www.w3.org/1998/Math/MathML"><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:msub><m:mrow><m:mi>O</m:mi></m:mrow><m:mrow><m:mn>3</m:mn></m:mrow></m:msub></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">-</m:mo></m:mrow></m:msup></m:mrow></m:msub><m:mo class="MathClass-bin">/</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">+</m:mo></m:mrow></m:msup></m:mrow></m:msub></m:math></inline-formula>). To better understand the effect of ion activity ratios on CaCO<sub>3 </sub>precipitation kinetics and Sr<sup>2+ </sup>co-precipitation, experiments were conducted under constant composition conditions where the supersaturation state (Ω) for calcite was held constant at 9.4, but the ion activity ratio <inline-formula><m:math name="1467-4866-13-1-i2" xmlns:m="http://www.w3.org/1998/Math/MathML"><m:mrow><m:mo class="MathClass-open">(</m:mo><m:mrow><m:mi>r</m:mi><m:mo class="MathClass-rel">=</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:msub><m:mrow><m:mi>O</m:mi></m:mrow><m:mrow><m:mn>3</m:mn></m:mrow></m:msub></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">-</m:mo></m:mrow></m:msup></m:mrow></m:msub><m:mo class="MathClass-bin">/</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">+</m:mo></m:mrow></m:msup></m:mrow></m:msub></m:mrow><m:mo class="MathClass-close">)</m:mo></m:mrow></m:math></inline-formula> was varied between 0.0032 and 4.15.</p> <p>Results</p> <p>Calcite was the only phase observed, by XRD, at the end of the experiments. Precipitation rates increased from 41.3 ± 3.4 μmol m<sup>-2 </sup>min<sup>-1 </sup>at <it>r = </it>0.0315 to a maximum rate of 74.5 ± 4.8 μmol m<sup>-2 </sup>min<sup>-1 </sup>at <it>r = </it>0.306 followed by a decrease to 46.3 ± 9.6 μmol m<sup>-2 </sup>min<sup>-1 </sup>at <it>r </it>= 1.822. The trend was simulated using a simple mass transfer model for solute uptake at the calcite surface. However, precipitation rates at fixed saturation states also evolved with time. Precipitation rates accelerated for low <it>r </it>values but slowed for high <it>r </it>values. These trends may be related to changes in effective reactive surface area. The <inline-formula><m:math xmlns:m="http://www.w3.org/1998/Math/MathML" name="1467-4866-13-1-i1"><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:msub><m:mrow><m:mi>O</m:mi></m:mrow><m:mrow><m:mn>3</m:mn></m:mrow></m:msub></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">-</m:mo></m:mrow></m:msup></m:mrow></m:msub><m:mo class="MathClass-bin">/</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">+</m:mo></m:mrow></m:msup></m:mrow></m:msub></m:math></inline-formula> ratios did not affect the distribution coefficient for Sr in calcite (D<sup>P</sup><sub>Sr</sub><sup>2+</sup>), apart from the indirect effect associated with the established positive correlation between D<sup>P</sup><sub>Sr</sub><sup>2+ </sup>and calcite precipitation rate.</p> <p>Conclusion</p> <p>At a constant supersaturation state (Ω = 9.4), varying the ion activity ratio affects the calcite precipitation rate. This behavior is not predicted by affinity-based rate models. Furthermore, at the highest ion ratio tested, no precipitation was observed, while at the lowest ion ratio precipitation occurred immediately and valid rate measurements could not be made. The maximum measured precipitation rate was 2-fold greater than the minima, and occurred at a carbonate to calcium ion activity ratio of 0.306. These findings have implications for predicting the progress and cost of remediation operations involving enhanced calcite precipitation where mineral precipitation rates, and the spatial/temporal distribution of those rates, can have significant impacts on the mobility of contaminants.</p
Hydrothermal replacement of aragonite by calcite: Interplay between replacement, fracturing and growth
The hydrothermal transformation of single aragonite crystals into polycrystalline calcite has been studied under hydrothermal conditions. The transformation involves a fluid-mediated replacement reaction, associated with fracturing of the initial aragonite crystal and growth of calcite throughout various parts of the reacted aragonite. The observed overall preservation of the crystal morphology is typical of an interface-coupled dissolution-reprecipitation mechanism. Analysis of the crystallographic orientation of the product calcite using electron backscatter diffraction (EBSD) showed little to no link between the two phases under the studied conditions, with calcite crystallites exhibiting dominantly different crystallographic orientations compared to those of the aragonite and of neighbouring calcite domains.The complexity of the observed textures is mainly a result of the combination of fracturing of the crystal and initiation of nucleation and growth at different points of the exposed aragonite surface. Experiments performed with solutions enriched in 18O as a tracer for oxygen exchange and monitored by Raman spectroscopy, showed that carbonate ions in the starting solution are mixed with carbonate from the dissolving aragonite, resulting in an 18O concentration in the product calcite which depended on the local fluid transport through the fractures. As replacement processes among the CaCO3 phases are relevant to a wide range of applications, understanding the mechanisms is essential for the interpretation of observations of natural and/or experimental samples. This study describes the interplay between the replacement process, the fracturing of the crystal and growth of the new phase, calcite, and provides new insights into the mechanism of the aragonite to calcite transition. The combination of the two methods, EBSD and Raman spectroscopy, demonstrates the importance of local fluid composition and transport pathways in determining the isotope and element exchange in mineral replacement reactions
The effect of fluid composition on the mechanism of the aragonite to calcite transition
Experiments were performed to investigate the transformation of natural aragonite crystals to calcite by reaction with aqueous solutions of calcium carbonate at hydrothermal conditions for different periods of time. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy and Laser ablation inductively coupled mass spectrometry (LA-ICP-MS) were used to characterize the reaction product. The results indicate that the replacement of aragonite by calcite follows an interface-coupled dissolution-precipitation mechanism. © 2008 The Mineralogical Society
Crystal growth of apatite by replacement of an aragonite precursor
The replacement of aragonite by apatite is a process that occurs naturally during diagenesis, chemical weathering and natural hydrothermal reactions and is artificially promoted in medical sciences for use of the product material as a bone implant. We have investigated the mechanism and the kinetics of this replacement by using biogenic aragonite (cuttlebone of the Sepia officinalis) as a starting material and reacting it with di-ammonium hydrogen phosphate solution. Isothermal experiments were carried out over a range of temperatures up to 190 °C. Quantification of each solid phase, for different reaction times, was obtained by the Rietveld analysis of powder X-ray diffraction patterns. An empirical activation energy was calculated by using two different approaches to analyze the data. Scanning electron microscopy showed that the fine structure of the cuttlebone was perfectly retained even after aragonite had been completely converted to apatite. We present a detailed investigation of the kinetics of a reaction that involves interaction of a solid phase with an aqueous fluid and leads to a pseudomorphic replacement of the initial solid phase by a new, chemically different, phase. This replacement process is described in terms of an interface-coupled dissolutionreprecipitation mechanism. © 2010 Elsevier B.V
Polycrystalline apatite synthesized by hydrothermal replacement of calcium carbonates
Aragonite and calcite single crystals can be readily transformed into polycrystalline hydroxyapatite pseudomorphs by hydrothermal treatment in a (NH4)2HPO4 solution. Scanning electron microscopy of the reaction products showed that the transformation of aragonite to apatite is characterised by the formation of a sharp interface between the two phases and by the development of intracrystalline porosity in the hydroxyapatite phase. In addition, electron backscattered diffraction (EBSD) imaging showed that the c-axis of apatite is predominantly oriented perpendicular to the reaction front with no crystallographic relationship to the aragonite lattice. However, the Ca isotopic composition of the parent aragonite, measured by thermal ionization mass spectrometry was inherited by the apatite product.Hydrothermal experiments conducted with use of phosphate solutions prepared with water enriched in 18O (97%) further revealed that the 18O from the solution is incorporated in the product apatite, as measured by micro-Raman spectroscopy. Monitoring the distribution of 18O with Raman spectroscopy was possible because the incorporation of 18O in the PO4 group of apatite generates four new Raman bands at 945.8, 932, 919.7 and 908.8cm-1, in addition to the ?1(PO4) symmetric stretching band of apatite located at 962cm-1, which can be assigned to four 18O-bearing PO4 species. The relative intensities of these bands reflect the 18O content in the PO4 group of the apatite product. By using equilibrated and non-equilibrated solutions, with respect to the 18O distribution between aqueous phosphate and water, we could show that the concentration of 18O in the apatite product is linked to the degree of 18O equilibration in the solution. The textural and chemical observations are indicative of a coupled mechanism of aragonite dissolution and apatite precipitation taking place at a moving reaction interface
Experimental study of the aragonite to calcite transition in aqueous solution
The experimental replacement of aragonite by calcite was studied under hydrothermal conditions at temperatures between 160 and 200 °C using single inorganic aragonite crystals as a starting material. The initial saturation state and the total [Ca2+]:[CO32−] ratio of the experimental solutions was found to have a determining effect on the amount and abundance of calcite overgrowths as well as the extent of replacement observed within the crystals. The replacement process was accompanied by progressive formation of cracks and pores within the calcite, which led to extended fracturing of the initial aragonite. The overall shape and morphology of the parent aragonite crystal were preserved. The replaced regions were identified with scanning electron microscopy and Raman spectroscopy.Experiments using carbonate solutions prepared with water enriched in 18O (97%) were also performed in order to trace the course of this replacement process. The incorporation of the heavier oxygen isotope in the carbonate molecule within the calcite replacements was monitored with Raman spectroscopy. The heterogeneous distribution of 18O in the reaction products required a separate study of the kinetics of isotopic equilibration within the fluid to obtain a better understanding of the 18O distribution in the calcite replacement. An activation energy of 109 kJ/mol was calculated for the exchange of oxygen isotopes between [C16O32−]aq and [H218O] and the time for oxygen isotope exchange in the fluid at 200 °C was estimated at ∼0.9 s. Given the exchange rate, analyses of the run products imply that the oxygen isotope composition in the calcite product is partly inherited from the oxygen isotope composition of the aragonite parent during the replacement process and is dependent on access of the fluid to the reaction interface rather than equilibration time. The aragonite to calcite fluid-mediated transformation is described by a coupled dissolution–reprecipitation mechanism, where aragonite dissolution is coupled to the precipitation of calcite at an inwardly moving reaction interface
Pseudomorphic replacement of single calcium carbonate crystals by polycrystalline apatite
During chemical weathering and natural hydrothermal reactions, apatite can form by replacing calcium carbonates. In hydrothermal experiments in which aragonite and calcite single crystals have been reacted with phosphate solutions, the carbonates are replaced by polycrystalline hydroxylapatite (HAP). In both cases the crystals have retained their overall morphology while their compositions have changed significantly. The HAP appears to have a crystallographic relationship to the parent carbonate crystals. The textural relationships are consistent with an interface-coupled dissolution-precipitation mechanism. Structural relationships and relative molar volumes and solubilities appear to be factors that greatly affect replacement reactions. © 2008 The Mineralogical Society
Correction to:Compressive loading of the murine tibia reveals site-specific micro-scale differences in adaptation and maturation rates of bone (Osteoporosis International, (2017), 28, 3, (1121-1131), 10.1007/s00198-016-3846-6)
This article was originally published under a CC BY-NC-ND 4.0 license, but has now been made available under a CC BY 4.0 license. The PDF and HTML versions of the paper have been modified accordingly
Cryo-Biopsy versus 19G needle versus 22G needle with EBUS-TBNA endoscopy
Introduction: We have been using cryo-biopsy for endobronchial lesions for lung cancer diagnosis and debulking. Cryo-biopsy is also known to be an excellent tool for diagnosis of lung interstitial disease. Recently cryo-biopsy with the 1.1mm probe was used for lymphnode biopsy. Patients and Methods: 311 patients participated with lymphadenopathy and at least one lung lesion. The following tools were used for diagnosis; 22G Mediglobe Sonotip, 22G Medigolbe, 21G Olympus, 19G Olympus and 1.1mm cryo probe ERBE CRYO 2 system (3 seconds froze). A PENTAX Convex-probe EBUS was used for biopsy guidance. Results: Cell-blocks slices had a higher number in the 19G needle group (19G> Cryo Probe>22G Mediglobe Sonotip >21G Olympus >22G Mediglobe). Conclusion: Cryo biopsy of the lymphnodes is safe with the 1.1mm cryo probe. Further studies are needed in order to evaluate new probes and the technique specifications. © The author(s)