52 research outputs found
Two-dimensional leapfrog scheme for trajectories of relativistic charged particles in static axisymmetric electric and magnetic field
A method for the calculation of two-dimensional particle trajectories is proposed in this work. It makes use of the cylindrical symmetry and the simplification of the static electric field, so that there should be no systematic error for the centered large-orbit rotations nor for the acceleration or deceleration in a uniform electric field. The method also shows a lower error level than the standard Boris method in many cases. Typical applications of this method are for example, electron microscopes, electron guns and collectors of gyro-devices as well as of other vacuum tubes, which can be described in axisymmetric cylindrical coordinates. Besides, the proposed method enforces the conservation of canonical angular momentum by construction, which is expected to show its advantages in the simulation of cusp electron guns and other components relying on non-adiabatic transitions in the externally applied static magnetic field
Comparison between controlled non-adiabatic and ExB concepts for gyrotron multistage depressed collectors
Multistage Depressed Collector Design Studies for High Power Gyrotrons Based on the E×B Drift Concept
Novel High-Frequency Electric Field Sweeping Concept for High-Power Gyrotron Collectors
Future fusion power plants will require for plasma heating and noninductive current drive high-power gyrotrons, each of which generates 2 MW of continuous-wave microwave power, while another 2 MW in the spent electron beam is dissipated as heat on the collector wall. In today’s 1-MW continuous-wave gyrotrons, collector coils superimpose an ac (10–50 Hz) magnetic field to sweep the hot spots of spent electrons over a large area. However, to double today’s power, it will also be critical to reduce the hot spot dwell time preventing significant increase of material fatigue. This can be achieved by increasing the sweeping frequency. However, a higher frequency magnetic field would hardly penetrate the metallic collector vessel due to eddy currents. Instead of magnetic field, sweeping with electric fields is proposed for the first time. The presented mechanism is capable to apply several orders higher sweeping frequency to reduce the periodic variation of temperature, and thus, the device lifetime can be extended
Gyrotron multistage depressed collector based on E × B drift concept using azimuthal electric field. II: Upgraded designs
Multistage Depressed Collectors (MDCs) are nontrivial for high-frequency gyrotrons. A basic conceptual design of an E x B MDC using azimuthal electric fields was proposed in Part I of this series. In the present work, several upgraded design proposals based on the basic one will be elaborated. These proposals will significantly reduce the back-stream of electrons, which was the main drawback of the basic design proposal. Another upgraded design proposal will shrink the length and maximal radius of the MDC to be only a fraction of its full-length version. A conceptual design of the final MDC proposal will be given at the end
Toward the First Continuous Wave Compatible Multistage Depressed Collector Design for High Power Gyrotrons
The multistage depressed collector (MDC) is essential to significantly increase the overall efficiency of the gyrotron. To date, a short pulse (SP) MDC prototype system has been manufactured and is currently under test. The long-term goal that makes the most sense is to use MDCs on 2-MW fusion gyrotrons in continuous wave (CW) operation. To achieve this, a CW MDC system based on the same physical principle as the SP system is designed and analyzed for the first time. The highlights of this design are the sweeping systems to keep the thermal loading within an acceptable limit when the MDC is operated in CW. In the present analysis, the expected performance and size of the new CW MDC design are compared with that of the SP MDC prototype and with the corresponding single-stage depressed collectors (SDCs) as a reference. In addition, the effects of thermal expansion in CW operation are analyzed and discussed
Mechanical Design of the Short Pulse E×B Drift Two-Stage Depressed Collector Prototype for High Power Gyrotron
Multistage depressed collector (MDC) technology is capable of significantly increased overall tube efficiencies of vacuum electronic devices compared to conventional single stage depressed collectors (SDC). The spent electron beam sorting as used for TWT and klystron collectors is not effective in the high stray magnetic field of gyrotrons. For that reason, many new design approaches based on E×B drift concept have been theoretically investigated during the last years at KIT. The mechanical design for the first MDC for a high power gyrotron is finalized and the production started end of 2020. In this work, the fundamentals of the mechanical design and the cooling principle of the electrodes are presented
Mechanical Design of the Short Pulse E×B Drift Two-Stage Depressed Collector Prototype for High Power Gyrotron
Multistage depressed collector (MDC) technology is capable of significantly increased overall tube efficiencies of vacuum electronic devices compared to conventional single stage depressed collectors (SDC). The spent electron beam sorting as used for TWT and klystron collectors is not effective in the high stray magnetic field of gyrotrons. For that reason, many new design approaches based on E×B drift concept have been theoretically investigated during the last years at KIT. The mechanical design for the first MDC for a high power gyrotron is finalized and the production started end of 2020. In this work, the fundamentals of the mechanical design and the cooling principle of the electrodes are presented
Gyrotron multistage depressed collector based on e × B drift concept using azimuthal electric field. I. Basic design
Numerical Investigation on Spent Beam Deceleration Schemes for Depressed Collector of a High-Power Gyrotron
- …