Mathematical Modeling of Sun and Solar Drying Kinetics of Fermented Cocoa Beans

In this study, thin layer drying experiments were conducted to compute drying characteristics of fermented cocoa beans in open sun and indirect natural convection solar dryer. The drying experiments were conducted at the same time for comparison. Three different thin layers drying of the fermented beans were examined under field conditions for Akure, Nigeria. The drying process took place only in the falling rate period. The drying curves obtained from the experimental data were fitted to thirteen (13) different thin layer mathematical models. All the models were compared according to three evaluation parameters. These include coefficient of determination (R2), Root mean square error (RMSE) and Chi-square (X2).The results showed that increasing drying air temperature resulted to shorter drying times. The Vermal et al. model was found to be the most suitable for describing the drying curve of the convective indirect solar drying process of cocoa beans with R2 = 0.9562, X2=0.0069 and RMSE=0.0067; while, the Midilli and Kucuk model, best described the drying curve of fermented cocoa beans under open sun with R2 = 0.9866, X2=0.0024 and RMSE=0.0023

Modelling of Moisture Loss and Oil Uptake During Deep-Fat Frying of Plantain (Dodo)

In this study, model was developed to predict moisture loss and oil uptake during deep-fat frying of plantain (dodo). Plantain samples were sliced and fried at different frying temperatures (150, 160, 170, 180 and 190 °C) in a deep fryer for periods varying from 2 to 4 min. Moisture and fat analyses were determined based on the AOAC standard method. Mathematical model was developed from fundamental law of mass diffusion with the aim of predicting moisture loss and oil uptake rate during DFF of dodo. The model was solved numerically using explicit Finite Difference Technique (FDT). Computer codes were written in MATLAB environment for moisture loss and oil uptake in the slices at different frying conditions. The predicted results were compared with experimental data and good agreement was obtained. The correlation coefficients between the predicted and experimental values of moisture and oil transfer models ranged from 0.988 to 0.994 and 0.958 to 0.978, respectively. The results show that the model is consistent and it may be used to predict moisture loss and oil uptake during deep-fat fried of dodo

Production and Storage of Cassava Chips for Reconversion into Gari

Cassava chips (7% moisture level) produced from cassava root (IITA 94/0561) was stored for 6 months in high density polyethylene bag. Stored chips were coarse milled, rehydrated to 62.51% and seeded with fresh cassava mash (FCM) at levels of 5%, 10% and 20%. The resulting mash was fermented for 72 hr, with pH monitored every 24 hr, and processed to gari. Yield and swelling capacity of gari were determined. Sensory evaluation was carried out on water soaked gari and gari paste (‘eba’). While least values for pH was obtained in FCM throughout the fermentation period, there was reduction in values in all samples with increase in fermentation time from 30.01 to 33.40%. Yield of gari from the seeded chips ranged from 64.4-72.3%, while that of FCM was 18.7%. Swelling capacity of gari ranged from 2.0 - 3.0 in FCM and that seeded with 20% FCM, respectively. Sensory evaluation result revealed that gari produced from cassava chips seeded at 10% level is adequate for making ‘eba’ while that seeded at 5% level is adequate for consumption as soaked gari (p<0.05). Use of stored cassava chips with 10% FCM for gari production could be encouraged to reduce postharvest problem of cassava roots and the drudgery of gari processing. Keywords: Cassava chips, cassava mash, gari, ‘eba’, postharvest losses, storag

Health seeking behaviour in management of erectile dysfunction among men in an urban African population

Background: Erectile dysfunction (ED) is consistent inability to achieve/maintain penile erection sufficiently enough for satisfactory sexual intercourse. It is a major sexual disorder causing significant distress in men with associated poor quality of life. Despite it being a common sexual disorder, many of the affected people do not seek medical care. The study sought to investigate health seeking behaviour in management of ED among urban dwelling African men.Methods: A cross-sectional descriptive survey method was adopted. The study population comprised of men drawn from an urban setting in Nigeria using a multi-stage sampling technique. Three hypotheses were formulated which were cultural beliefs, financial status and medical access/perception on quality of care will not significantly influence health seeking behaviour for management of ED. Researchers’ designed questionnaire validated by three experts drawn from the relevant fields with reliability co-efficient of 0.77 obtained through split half method by Pearson product moment correlation was used for data collection. The three postulated hypotheses were tested using Person product moment correlation.Results: All the three hypotheses were rejected at 0.05 alpha level of significance because their calculated r-values were greater than their critical values.Conclusions: It was concluded that cultural beliefs, financial status and access to medical facilities/perception of quality of care from such medical facilities influence the health seeking behaviour of men in the management of ED.

ANALYSES OF COPPER CONCENTRATIONS IN PALM KERNEL CAKE FROM THREE INDUSTRIAL PALM KERNEL OIL MILLS.

Palm kernel cake, a by-product of palm kernel seed oil processing was analysed for its metallic contamination as livestock feed without modification or Zinc supplementation. Metalloid analysis of cake from industrial output revealed Copper II ion (Cu2+) concentration in quantities dangerous to livestock. Samples of Palm kernel cake, De-oxidised cake and Palm kernel oil products from industrial lines were analysed to determine sources of contamination in the cake using flame photometry, flame emission spectroscopy and Atomic Absorption Spectrometry. The sources of contamination were traced to the feed quality, materials of construction of the expeller section and degree of purification of bye-product and waste discharged. Preliminary investigation in fresh fruit showed that copper was a component, in the range of 14.43±0.4 and 17.03±0.6 (µg/g) but  higher copper content was later found associated with by–products at higher concentrations along the  process lines, especially at the crushing and solvent extraction stages. To take care of high copper concentrations and obtain less contaminated cake from industrial practices with a good inventory mechanism with free and dried kernel with concerns to the materials of construction to enhance continuous usage of cake as livestock feed supplement was proposed

Lesser Known Seed: A Renewable Pathway for Sustainable Animal Production

ABSTRACT The study was conducted to compare the effect of soybean meal based diet and Mucuna pruriens seed meal on feed intake, digestibility, and body weight changes of West Africa dwarf sheep (WAD). Thirty sheep with a mean body weight of 12.30 kg (±1.45), were used in a completely randomized design model for a 112 day period. The three dietary treatments consisted of soybean meal alone (control diet, A) , 50% soybean meal +50% Mucuna seed meal (diet B) and 100% Mucuna seed meal (diet C) were randomly assigned to each sheep. The animals were fed and watered ad-libitum throughout the experimental period. The results revealed improvement (p<0.05) in the acid detergent fiber (ADF), neutral detergent fiber (NDF) , cellulose, and lignin intakes of animal fed diet B compared to diets A (control) and C. The dry matter intake (DMI), crude protein intake (CPI) and ether extract intake (EEI) were similar between diets A and B and the least was diet C. The apparent digestibility of Mucuna seed meal based diets, B and C, was significantly higher than that of the control diet A. Animals fed diet B had significantly higher body weight gain and feed efficiency. Additionally, the cost of feed per kg was cheaper in diet C, followed closely by diet B, and the least was diet A (control). It was concluded that 50% of the soybean meal can be replaced with 50% Mucuna seed meal without any detrimental effect on the animal

Development and Evaluation of a Combined Castor Seed Roaster-Oil Expeller

This study evaluated optimal process parameters for mechanical oil expression from castor seeds after designing a castor seed roaster-expeller. The effect of input variables (Moisture Content at 6, 7, 8, 9 and 10% db; Roasting Temperature at 80, 90, 100,110 and 120oC and Applied Pressure at 15, 20, 25, 30 and 35 MPa) on the oil yield, expression efficiency, expression loss and energy used were determined using Central Composite Design in Response Surface Methodology for the optimization and modelling. Analysis of Variance was employed to determine the level of significance (P≤ 0.05). The optimum expression efficiency, expression loss and minimum energy used were 72.86%, 0.63% and 584.19 Watts obtained at experimental conditions of 15.00 MPa applied pressure, 6% moisture content and 85.52°C heating temperature respectively. The R2 values of the developed models ranged from 0.813 to 0.982 at 95% confidence level. The developed combined castor seed roaster-oil expeller was found to be efficient and developed models showed adequate prediction with good relationships between dependent and independent variables. Keywords: castor seed, oil extraction, modeling, optimization DOI: 10.7176/ISDE/11-1-07 Publication date: January 31st 2020

Investigation of Wear Land and Rate of Locally Made HSS Cutting Tool

Production technology and machining are inseparable with cutting operation playing important roles. Investigation of wear land and rate of cutting tool developed locally (C=0.56%) with an HSS cutting tool (C=0.65%) as a control was carried out. Wear rate test was carried out using Rotopol –V and Impact tester. The samples (12) of locally made cutting tools and one (1) sample of a control HSS cutting tool were weighed to get the initial weight and grit was fixed at a point for the sample to revolve at a specific time of 10 mins interval. Approach of macro transfer particles that involved mechanism of abrasion and adhesion which was termed as mechanical wear to handle abrasion adhesion processes was used in developing equation for growth wear at flank. It was observed from the wear test that best minimum wear rate of 1.09 x10-8 and 2.053x10-8 for the tools developed and control were measured. MATLAB was used to simulate the wear land and rate under different conditions. Validated results of both the experimental and modeling showed that cutting speed has effect on wear rate while cutting time has predicted measure on wear land. Both experimental and modeling result showed best performances of tools developed over the control

DEVELOPMENT OF A TRAY DRYER FOR FRUITS AND VEGETABLES USING ZIG-ZAG AIR FLOW CONFIGURATION

 Post harvest losses in fruits and vegetables in developing countries like Nigeria is high due to poor storage and processing facilities. The use of cabinet dryer for dehydration of fruits and vegetables to improve their shelf life has a drawback of non-uniformity in drying along the length of trays. Hence an effort was made to solve this problem by using a zigzag air flow pattern configuration. A cabinet dryer of capacity21kg/batch was designed and developed. The dryer was tested with okra slices using zigzag air flow pattern configuration. At an air flow rate of 8.8m3/s and 600c it took about 9 hours to reduce the moisture content from 79.55% (w.b) to 6.03%(w.b). Results obtained showed that drying of the okra slices took place in the falling rate period. The drying efficiency of the dryer was found to be 70%

Absolute quantitation of coronary steal induced by intravenous dipyridamole

AbstractOBJECTIVESThe study was done to determine whether coronary steal (defined as an absolute decrease in perfusion from resting blood flow) is induced by intravenous (IV) dipyridamole in patients with severe coronary artery disease (CAD).BACKGROUNDMyocardial ischemia during coronary vasodilation is usually attributed to coronary steal. However, there is limited data on the absolute magnitude of coronary steal in humans.METHODSEighteen patients with multivessel CAD underwent dynamic positron emission tomography (PET) imaging with 13NH3at rest and after infusion of IV dipyridamole. Eight myocardial sectors were analyzed per short axis slice and myocardial blood flow calculated with a two-compartment model in absolute terms.RESULTSCoronary steal occurred in 8 of the 18 patients. In the 8 patients with coronary steal, myocardial blood flow decreased from 90 ± 18 ml/100 g/min at rest to 68 ± 27 ml/100 g/min following dipyridamole in the segments with steal, and increased from 87 ± 19 to 138 ± 16 ml/100 g/min following dipyridamole in the segments without steal. Significant clinical correlates of coronary steal were either ST elevation or the combination of ST depression and angina.CONCLUSIONSCoronary vasodilation with IV dipyridamole is associated with significant reductions in blood flow to collateral-dependent myocardium consistent with coronary steal in about 45% of patients with severe CAD