5 research outputs found
Prvi opis grinje (Hirstiella sp.) na zelenoj iguani u Turskoj i liječenje fipronilom - prikaz slučaja.
The aim of this case was to document the occurrence of a mite (Hirstiella sp.) on a green iguana and therapy to treat it with a 0.25% fipronil spray. Upon physical examination, a number of red mites, erythema, darkness, and itching were observed on the skin of a green iguana and Hirstiella sp. was diagnosed after microscopic examination. Treatment consisted of a 0.25% fipronil spray once weekly for three weeks. Fipronil was also sprayed into the cage. Mites were eliminated completely from both the body of the green iguana and its cage after the second application and clinical remission was observed.Svrha je ovoga prikaza prvi put opisati pojavu grinje (Hirstiella sp.) na zelenoj iguani i liječenje invazije raspršivanjem 0,25%-tnog fipronila. Kliničkim pregledom ustanovljeno je mnoštvo crvenih grinja, eritem, zamućenje i svrbež na koži. Mikroskopskom pretragom ustanovljena je Hirstiella sp. Za liječenje je bio rabljen 0,25%-tni fipronil u obliku raspršivača jednom tjedno tijekom tri tjedna. Fipronil je bio raspršen i po kavezu. Grinje su nestale s tijela iguane i kaveza nakon druge primijene fipronila, a istodobno su nestali klinički znakovi invazije
Seawater effect on pin-loaded laminated composites with two parallel holes
The aim of this study was to investigate the effects of seawater on the failure mode, first failure load and bearing strength behaviour of the pinned joint of fibreglass-reinforced woven epoxy composite prepregs. The specimens were kept in seawater for 3- and 6-month periods. After each period, their mechanical properties were examined. The edge distance-to-upper hole diameter (E/D), the two hole-tohole centre diameter (K/D), the distance from the upper or the lower edge of the specimen to the centre of the hole-to-hole diameter (M/D), and the width of the specimen-to-hole diameter (W/D) ratios were selected as parameters. Moreover, the finite element models of the specimens were developed using ANSYS software, and the Tsai-Wu criterion was used to obtain the first failure load. The numerical and experimental results were compared and were found to be in good agreement for the first failure load