Solutions for New Terrestrial Broadcasting Systems Offering Simultaneously Stationary and Mobile Services

221 p.[EN]Since the first broadcasted TV signal was transmitted in the early decades of the past century, the television broadcasting industry has experienced a series of dramatic changes. Most recently, following the evolution from analogue to digital systems, the digital dividend has become one of the main concerns of the broadcasting industry. In fact, there are many international spectrum authorities reclaiming part of the broadcasting spectrum to satisfy the growing demand of other services, such as broadband wireless services, arguing that the TV services are not very spectrum-efficient. Apart from that, it must be taken into account that, even if up to now the mobile broadcasting has not been considered a major requirement, this will probably change in the near future. In fact, it is expected that the global mobile data traffic will increase 11-fold between 2014 and 2018, and what is more, over two thirds of the data traffic will be video stream by the end of that period. Therefore, the capability to receive HD services anywhere with a mobile device is going to be a mandatory requirement for any new generation broadcasting system. The main objective of this work is to present several technical solutions that answer to these challenges. In particular, the main questions to be solved are the spectrum efficiency issue and the increasing user expectations of receiving high quality mobile services. In other words, the main objective is to provide technical solutions for an efficient and flexible usage of the terrestrial broadcasting spectrum for both stationary and mobile services. The first contributions of this scientific work are closely related to the study of the mobile broadcast reception. Firstly, a comprehensive mathematical analysis of the OFDM signal behaviour over time-varying channels is presented. In order to maximize the channel capacity in mobile environments, channel estimation and equalization are studied in depth. First, the most implemented equalization solutions in time-varying scenarios are analyzed, and then, based on these existing techniques, a new equalization algorithm is proposed for enhancing the receivers’ performance. An alternative solution for improving the efficiency under mobile channel conditions is treating the Inter Carrier Interference as another noise source. Specifically, after analyzing the ICI impact and the existing solutions for reducing the ICI penalty, a new approach based on the robustness of FEC codes is presented. This new approach employs one dimensional algorithms at the receiver and entrusts the ICI removing task to the robust forward error correction codes. Finally, another major contribution of this work is the presentation of the Layer Division Multiplexing (LDM) as a spectrum-efficient and flexible solution for offering stationary and mobile services simultaneously. The comprehensive theoretical study developed here verifies the improved spectrum efficiency, whereas the included practical validation confirms the feasibility of the system and presents it as a very promising multiplexing technique, which will surely be a strong candidate for the next generation broadcasting services.[ES]Desde el comienzo de la transmisión de las primeras señales de televisión a principios del siglo pasado, la radiodifusión digital ha evolucionado gracias a una serie de cambios relevantes. Recientemente, como consecuencia directa de la digitalización del servicio, el dividendo digital se ha convertido en uno de los caballos de batalla de la industria de la radiodifusión. De hecho, no son pocos los consorcios internacionales que abogan por asignar parte del espectro de radiodifusión a otros servicios como, por ejemplo, la telefonía móvil, argumentado la poca eficiencia espectral de la tecnología de radiodifusión actual. Asimismo, se debe tener en cuenta que a pesar de que los servicios móviles no se han considerado fundamentales en el pasado, esta tendencia probablemente variará en el futuro cercano. De hecho, se espera que el tráfico derivado de servicios móviles se multiplique por once entre los años 2014 y 2018; y lo que es más importante, se pronostica que dos tercios del tráfico móvil sea video streaming para finales de ese periodo. Por lo tanto, la posibilidad de ofrecer servicios de alta definición en dispositivos móviles es un requisito fundamental para los sistemas de radiodifusión de nueva generación. El principal objetivo de este trabajo es presentar soluciones técnicas que den respuesta a los retos planteados anteriormente. En particular, las principales cuestiones a resolver son la ineficiencia espectral y el incremento de usuarios que demandan mayor calidad en los contenidos para dispositivos móviles. En pocas palabras, el principal objetivo de este trabajo se basa en ofrecer una solución más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. La primera contribución relevante de este trabajo está relacionada con la recepción de la señal de televisión en movimiento. En primer lugar, se presenta un completo análisis matemático del comportamiento de la señal OFDM en canales variantes con el tiempo. A continuación, con la intención de maximizar la capacidad del canal, se estudian en profundidad los algoritmos de estimación y ecualización. Posteriormente, se analizan los algoritmos de ecualización más implementados, y por último, basándose en estas técnicas, se propone un nuevo algoritmo de ecualización para aumentar el rendimiento de los receptores en tales condiciones. Del mismo modo, se plantea un nuevo enfoque para mejorar la eficiencia de los servicios móviles basado en tratar la interferencia entre portadoras como una fuente de ruido. Concretamente, tras analizar el impacto del ICI en los receptores actuales, se sugiere delegar el trabajo de corrección de dichas distorsiones en códigos FEC muy robustos. Finalmente, la última contribución importante de este trabajo es la presentación de la tecnología LDM como una manera más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. El análisis teórico presentado confirma el incremento en la eficiencia espectral, mientras que el estudio práctico valida la posible implementación del sistema y presenta la tecnología LDM c

Constellation design for future communication systems: a comprehensive survey

[EN] The choice of modulation schemes is a fundamental building block of wireless communication systems. As a key component of physical layer design, they critically impact the expected communication capacity and wireless signal robustness. Their design is also critical for the successful roll-out of wireless standards that require a compromise between performance, efficiency, latency, and hardware requirements. This paper presents a survey of constellation design strategies and associated outcomes for wireless communication systems. The survey discusses their performance and complexity to address the need for some desirable properties, including consistency, channel capacity, system performance, required demapping architecture, flexibility, and independence. Existing approaches for constellation designs are investigated using appropriate metrics and categorized based on their theoretical algorithm design. Next, their application to different communication standards is analyzed in context, aiming at distilling general guidelines applicable to the wireless building block design. Finally, the survey provides a discussion on design directions for future communication system standardization processes.This work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under Program PRE_2020_2_0105, and in part by the Spanish Government through the Project PHANTOM (MCIU/AEI/FEDER, UE) under Gran

Nonorthogonal Multiple Access and Subgrouping for Improved Resource Allocation in Multicast 5G NR

The ever-increasing demand for applications with stringent constraints in device density, latency, user mobility, or peak data rate has led to the appearance of the last generation of mobile networks (i.e., 5G). However, there is still room for improvement in the network spectral efficiency, not only at the waveform level but also at the Radio Resource Management (RRM). Up to now, solutions based on multicast transmissions have presented considerable efficiency increments by successfully implementing subgrouping strategies. These techniques enable more efficient exploitation of channel time and frequency resources by splitting users into subgroups and applying independent and adaptive modulation and coding schemes. However, at the RRM, traditional multiplexing techniques pose a hard limit in exploiting the available resources, especially when users' QoS requests are unbalanced. Under these circumstances, this paper proposes jointly applying the subgrouping and Non-Orthogonal Multiple Access (NOMA) techniques in 5G to increase the network data rate. This study shows that NOMA is highly spectrum-efficient and could improve the system throughput performance in certain conditions. In the first part of this paper, an in-depth analysis of the implications of introducing NOMA techniques in 5G subgrouping at RRM is carried out. Afterward, the validation is accomplished by applying the proposed approach to different 5G use cases based on vehicular communications. After a comprehensive analysis of the results, a theoretical approach combining NOMA and time division is presented, which improves considerably the data rate offered in each use case.This work was supported in part by the Italian Ministry of University and Research (MIUR), within the Smart Cities framework, Project Cagliari2020 ID: PON04a2_00381; in part by the Basque Government under Grant IT1234-19; and in part by the Spanish Government [Project PHANTOM under Grant RTI2018-099162-B-I00 (MCIU/AEI/FEDER, UE)]

Large size FFTs over time-varying channels

[EN] In orthogonal frequency division multiplexing (OFDM) signals, the usage of large size fast Fourier transforms (FFTs) reduces the guard interval percentage, and therefore increases the data throughput reducing the data overhead. In addition, for the same pilot pattern, the distance between adjacent pilots is smaller, which will improve the channel estimation. Nevertheless, up to now, they have not been considered for delivering mobile services as the inter-carrier interference (ICI) due to the Doppler effect is very critical. The main objective is to show that taking advantage of the latest improvements in error correction techniques, it is feasible to use large size FFTs for time-varying channels. Furthermore, there is also presented a theoretical estimation for quantifying the loss due to the ICI, and finally several simulation results that reinforce the idea that large OFDM symbols are suitable for mobile channels.This work has been financially supported in part by the University of the Basque Country UPV/EHU (UFI 11/30), by the Basque Government (IT-683–13 and SAIOTEK), by the Spanish Ministry of Science and Innovation under the project NG-RADIATE (TEC2009-14201), and by the Spanish Ministry of Economy and Competitiveness under the project HEDYT-GBB (TEC2012-33302)

Comparison between Different Channel Coding Techniques for IEEE 802.11be within Factory Automation Scenarios

This paper presents improvements in the physical layer reliability of the IEEE 802.11be standard. Most wireless system proposals do not fulfill the stringent requirements of Factory Automation use cases. The harsh propagation features of industrial environments usually require time retransmission techniques to guarantee link reliability. At the same time, retransmissions compromise latency. IEEE 802.11be, the upcoming WLAN standard, is being considered for Factory Automation (FA) communications. 802.11be addresses specifically latency and reliability difficulties, typical in the previous 802.11 standards. This paper evaluates different channel coding techniques potentially applicable in IEEE 802.11be. The methods suggested here are the following: WLAN LDPC, WLAN Convolutional Codes (CC), New Radio (NR) Polar, and Long Term Evolution (LTE)-based Turbo Codes. The tests consider an IEEE 802.11be prototype under the Additive White Gaussian Noise (AWGN) channel and industrial channel models. The results suggest that the best performing codes in factory automation cases are the WLAN LDPCs and New Radio Polar Codes.This work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under Grant PRE2019_099407, and in part by the Spanish Government through project PHANTOM (MCIU/AEI/FEDER, UE) under Grant RTI2018-099162-B-I00

Traffic Classification for Network Slicing in Mobile Networks

Network slicing is a promising technique used in the smart delivery of traffic and can satisfy the requirements of specific applications or systems based on the features of the 5G network. To this end, an appropriate slice needs to be selected for each data flow to efficiently transmit data for different applications and heterogeneous requirements. To apply the slicing paradigm at the radio segment of a cellular network, this paper presents two approaches for dynamically classifying the traffic types of individual flows and transmitting them through a specific slice with an associated 5G quality-of-service identifier (5QI). Finally, using a 5G standalone (SA) experimental network solution, we apply the radio resource sharing configuration to prioritize traffic that is dispatched through the most suitable slice. The results demonstrate that the use of network slicing allows for higher efficiency and reliability for the most critical data in terms of packet loss or jitter.This research was supported by the Spanish Centre for the Development of Industrial Technology (CDTI) and the Ministry of Economy, Industry and Competitiveness under grant/project CER-20191015/Open, Virtualized Technology Demonstrators for Smart Networks (Open-VERSO)

Analysis of NOMA-Based Retransmission Schemes for Factory Automation Applications

New use cases and applications in factory automation scenarios impose demanding requirements for traditional industrial communications. In particular, latency and reliability are considered as some of the most representative Key Performance Indicators (KPI) that limit the technological choices addressing wireless communications. Indeed, there is a considerable research effort ongoing in the area of wireless systems, not only from academia, but also from companies, towards novel solutions that fit Industry 4.0 KPIs. A major limitation for traditional wireless architectures is related to the harsh nature of the industrial propagation channel. Accordingly, this paper addresses these challenges by studying the reliability and latency performance of the joint use of different retransmission schemes in combination with Non-Orthogonal Multiple Access (NOMA) techniques. Two general retransmission schemes have been tested: time-based and spatial diversity-based retransmissions. An adaptive injection level NOMA solution has been combined with the retransmission schemes to improve the reliability of critical information. In all cases, a particular set of simulations has been carried out varying the main parameters, such as modulation, code rate and the injection level. Moreover, the impact of the number of transmitters in relation to the communication reliability has been analyzed. Results show that spatial diversity-based retransmissions overcome considerably the reliability obtained with time-domain retransmissions while maintaining assumable latency ratesThis work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under Grant PRE_2020_2_0105, and in part by the Spanish Government through project PHANTOM (MCIU/AEI/FEDER, UE) under Grant RTI2018-099162-B-I0

A new voltage probe with improved performance at the 10 kHz–500 kHz frequency range for field measurements in LV networks

[EN] Voltage measurements in the frequency range from 10 kHz to 500 kHz are used to quantify the level of the Narrow Band Power Line Communication transmitted signals, the noise and the non-intentional conducted emissions generated by the devices connected to the Low Voltage grid. Considering that the voltage levels within this frequency range are very small if compared to measurements below 2 kHz, measuring equipment of higher precision is needed, but existing standards do not currently cover this frequency band. In this paper, a voltage adapter with improved performance at the 10 kHz–500 kHz frequency range for field measurements in LV networks is presented. Moreover, a measurement setup and methodology for the frequency-dependent characterization of this type of voltage adapters is described, which is used to demonstrate the outperformance of the designed probe with respect to four commercial devices.This work has been financially supported in part by the Basque Government (Elkartek program and IT-683-13)

Predictive CDN Selection for Video Delivery Based on LSTM Network Performance Forecasts and Cost-Effective Trade-Offs

Owing to increasing consumption of video streams and demand for higher quality content and more advanced displays, future telecommunication networks are expected to outperform current networks in terms of key performance indicators (KPIs). Currently, content delivery networks (CDNs) are used to enhance media availability and delivery performance across the Internet in a cost-effective manner. The proliferation of CDN vendors and business models allows the content provider (CP) to use multiple CDN providers simultaneously. However, extreme concurrency dynamics can affect CDN capacity, causing performance degradation and outages, while overestimated demand affects costs. 5G standardization communities envision advanced network functions executing video analytics to enhance or boost media services. Network accelerators are required to enforce CDN resilience and efficient utilization of CDN assets. In this regard, this study investigates a cost-effective service to dynamically select the CDN for each session and video segment at the Media Server, without any modification to the video streaming pipeline being required. This service performs time series forecasts by employing a Long Short-Term Memory (LSTM) network to process real time measurements coming from connected video players. This service also ensures reliable and cost-effective content delivery through proactive selection of the CDN that fits with performance and business constraints. To this end, the proposed service predicts the number of players that can be served by each CDN at each time; then, it switches the required players between CDNs to keep the (Quality of Service) QoS rates or to reduce the CP's operational expenditure (OPEX). The proposed solution is evaluated by a real server, CDNs, and players and delivering dynamic adaptive streaming over HTTP (MPEG-DASH), where clients are notified to switch to another CDN through a standard MPEG-DASH media presentation description (MPD) update mechanismThis work was supported in part by the EC projects Fed4Fire+, under Grant 732638 (H2020-ICT-13-2016, Research and Innovation Action), and in part by Open-VERSO project (Red Cervera Program, Spanish Government's Centre for the Development of Industrial Technology

A Measurement-based Multipath Channel Model for Signal Propagation in Presence of Wind Farms in the UHF Band

[EN] Scattering signals on wind turbines may lead to degradation problems on the communication systems provided in the UHF band, such as terrestrial television broadcasting, broadband wireless systems or public safety services. To date, despite the continuous requests from the International Telecommunication Union for studies on this field, no channel model has been developed to characterize signal propagation under these particular conditions. In response to this necessity, this paper presents a complete Tapped Delay Line (TDL) channel model to characterize multipath propagation in presence of a wind farm, including novel scattering modeling and Doppler spectra characterization. As proved later, this channel model, which is based on both theoretical development and empirical data obtained in the surroundings of a real wind farm, is adaptable to the particular features of any case under study: wind turbine dimensions, working frequency, and relative location of the wind farm, transmitter and receivers.This work was supported in part by the European Union FP7 (grant agreement n 296164), by the Spanish Ministry of Economy and Competitiveness (project TEC2012-32370), and by the Basque Government (SAIOTEK program)