154 research outputs found
Recommended from our members
AdvancingIn situAnalytical Electron Microscopy for Probing Dynamic Nano-Scale Solid State Electrochemistry
Recommended from our members
Future energy, fuel cells, and solid-oxide fuel-cell technology
According to the US Department of Energy’s Energy Infomation Administration (EIA) (International Energy Outlook 2017), world energy consumption will increase 28% between 2015 and 2040, rising from 575 quadrillion Btu (∼606 quadrillion kJ) in 2015 to 736 quadrillion Btu (∼776 quadrillion kJ) in 2040. EIA predicts increases in consumption for all energy sources (excluding coal, which is estimated to remain flat)—fossil (petroleum and other liquids, natural gas), renewables (solar, wind, hydropower), and nuclear. Although renewables are the world’s fastest growing form of energy, fossil fuels are expected to continue to supply more than three-quarters of the energy used worldwide. Among the various fossil fuels, natural gas is the fastest growing, with a projected increase of 43% from 2015 to 2040. As the use of fossil fuels increases, the EIA projects world energy-related carbon dioxide emission to grow from ∼34 billion metric tons in 2015 to ∼40 billion metric tonnes in 2040 (an average 0.6% increase per year)
Investigation on Aluminum-Based Amorphous Metallic Glass as New Anode Material in Lithium Ion Batteries
Aluminum based amorphous metallic glass powders were produced and tested as the anode materials for the lithium ion rechargeable batteries. Ground Al₈₀Ni₁₀La₁₀ was found to have a low first cycle capacity of about 100 Ah/Kg. The considerable amount of intermetallic formed in the amorphous glass makes the aluminum inactive towards the lithium. The ball milled Al₈₈Ni₉Y₃ powders contain pure aluminum crystalline particles in the amorphous matrix and have first cycle capacity of about 500 Ah/Kg. Nevertheless, polarization was caused by oxidation introduced by the ball-milling process. The electrochemical performances of these amorphous metallic glasses need to be further investigated. Their full lithium insertion capacities cannot be confirmed until the compositions and particle size inside the metallic glass anodes, the conformation of the electrodes and the mechanical milling processes are optimized.Singapore-MIT Alliance (SMA
Amorphous Metallic Glass as New High Power and Energy Density Anodes For Lithium Ion Rechargeable Batteries
We have investigated the use of aluminum based amorphous metallic glass as the anode in lithium ion rechargeable batteries. Amorphous metallic glasses have no long-range ordered microstructure; the atoms are less closely packed compared to the crystalline alloys of the same compositions; they usually have higher ionic conductivity than crystalline materials, which make rapid lithium diffusion possible. Many metallic systems have higher theoretical capacity for lithium than graphite/carbon; in addition irreversible capacity loss can be avoided in metallic systems. With careful processing, we are able to obtain nano-crystalline phases dispersed in the amorphous metallic glass matrix. These crystalline regions may form the active centers with which lithium reacts. The surrounding matrix can respond very well to the volume changes as these nano-size regions take up lithium. A comparison study of various kinds of anode materials for lithium rechargeable batteries is carried out.Singapore-MIT Alliance (SMA
Batteries: Predicting Calendar Aging in Lithium Metal Secondary Batteries: The Impacts of Solid Electrolyte Interphase Composition and Stability (Adv. Energy Mater. 26/2018)
Synthesis, electrochemistry and First Principles Calculation studies of layered Li-Ni-Ti-O compounds
New layered cathode materials, Li₀.₉Ni₀.₄₅Ti₀.₅₅O₂, were synthesized by means of ion-exchange from Na₀.₉Ni₀.₄₅Ti₀.₅₅O₂. The degree of cation disordering in the material depends critically on the synthesis conditions. Longer times and higher temperatures in the ion-exchange process induced more cation disordering. However, the partially disordered phase showed better capacity retention than the least disordered phase. First principles calculations indicated this could be attributed to the migration of Ti⁺⁴ into the Li layer during the electrochemical testing, which seems to depend sensitively on the Ni⁺² -Ti⁺⁴ configuration in the transition metal layer. The poor conductivity of this material could also be the reason for its low specific capacity according to the Density of States (DOS) obtained from first principles calculations indicating that only Ni participates in the electronic conductivity.Singapore-MIT Alliance (SMA
Local structure of glassy lithium phosphorus oxynitride thin films: a combined experimental and ab initio approach
Lithium phosphorus oxynitride (LiPON) is an amorphous solid-state lithium ion
conductor displaying exemplary cyclability against lithium metal anodes. There
is no definitive explanation for this stability due to the limited
understanding of the structure of LiPON. We provide a structural model of
RF-sputtered LiPON via experimental and computational spectroscopic methods.
Information about the short-range structure results from 1D and 2D solid-state
nuclear magnetic resonance experiments investigating chemical shift anisotropy
and dipolar interactions. These results are compared with first principles
chemical shielding calculations of Li-P-O/N crystals and ab initio molecular
dynamics-generated amorphous LiPON models to unequivocally identify the glassy
structure as primarily isolated phosphate monomers with N incorporated in both
apical and as bridging sites in phosphate dimers. Structural results suggest
LiPON's stability is a result of its glassy character. Free-standing LiPON
films are produced that exhibit a high degree of flexibility highlighting the
unique mechanical properties of glassy materials
Recommended from our members
Wearable thermoelectrics for personalized thermoregulation.
Thermoregulation has substantial implications for energy consumption and human comfort and health. However, cooling technology has remained largely unchanged for more than a century and still relies on cooling the entire space regardless of the number of occupants. Personalized thermoregulation by thermoelectric devices (TEDs) can markedly reduce the cooling volume and meet individual cooling needs but has yet to be realized because of the lack of flexible TEDs with sustainable high cooling performance. Here, we demonstrate a wearable TED that can deliver more than 10°C cooling effect with a high coefficient of performance (COP > 1.5). Our TED is the first to achieve long-term active cooling with high flexibility, due to a novel design of double elastomer layers and high-ZT rigid TE pillars. Thermoregulation based on these devices may enable a shift from centralized cooling toward personalized cooling with the benefits of substantially lower energy consumption and improved human comfort
Virtual Texture Generated using Elastomeric Conductive Block Copolymer in Wireless Multimodal Haptic Glove.
Haptic devices are in general more adept at mimicking the bulk properties of materials than they are at mimicking the surface properties. This paper describes a haptic glove capable of producing sensations reminiscent of three types of near-surface properties: hardness, temperature, and roughness. To accomplish this mixed mode of stimulation, three types of haptic actuators were combined: vibrotactile motors, thermoelectric devices, and electrotactile electrodes made from a stretchable conductive polymer synthesized in our laboratory. This polymer consisted of a stretchable polyanion which served as a scaffold for the polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT). The scaffold was synthesized using controlled radical polymerization to afford material of low dispersity, relatively high conductivity (0.1 S cm-1), and low impedance relative to metals. The glove was equipped with flex sensors to make it possible to control a robotic hand and a hand in virtual reality (VR). In psychophysical experiments, human participants were able to discern combinations of electrotactile, vibrotactile, and thermal stimulation in VR. Participants trained to associate these sensations with roughness, hardness, and temperature had an overall accuracy of 98%, while untrained participants had an accuracy of 85%. Sensations could similarly be conveyed using a robotic hand equipped with sensors for pressure and temperature
- …