664 research outputs found

    The microtubule cross-linker Feo controls the midzone stability, motor composition, and elongation of the anaphase B spindle in Drosophila embryos.

    Get PDF
    Chromosome segregation during anaphase depends on chromosome-to-pole motility and pole-to-pole separation. We propose that in Drosophila embryos, the latter process (anaphase B) depends on a persistent kinesin-5-generated interpolar (ip) microtubule (MT) sliding filament mechanism that "engages" to push apart the spindle poles when poleward flux is turned off. Here we investigated the contribution of the midzonal, antiparallel MT-cross-linking nonmotor MAP, Feo, to this "slide-and-flux-or-elongate" mechanism. Whereas Feo homologues in other systems enhance the midzone localization of the MT-MT cross-linking motors kinesin-4, -5 and -6, the midzone localization of these motors is respectively enhanced, reduced, and unaffected by Feo. Strikingly, kinesin-5 localizes all along ipMTs of the anaphase B spindle in the presence of Feo, including at the midzone, but the antibody-induced dissociation of Feo increases kinesin-5 association with the midzone, which becomes abnormally narrow, leading to impaired anaphase B and incomplete chromosome segregation. Thus, although Feo and kinesin-5 both preferentially cross-link MTs into antiparallel polarity patterns, kinesin-5 cannot substitute for loss of Feo function. We propose that Feo controls the organization, stability, and motor composition of antiparallel ipMTs at the midzone, thereby facilitating the kinesin-5-driven sliding filament mechanism underlying proper anaphase B spindle elongation and chromosome segregation

    Anaphase B.

    Get PDF
    Anaphase B spindle elongation is characterized by the sliding apart of overlapping antiparallel interpolar (ip) microtubules (MTs) as the two opposite spindle poles separate, pulling along disjoined sister chromatids, thereby contributing to chromosome segregation and the propagation of all cellular life. The major biochemical "modules" that cooperate to mediate pole-pole separation include: (i) midzone pushing or (ii) braking by MT crosslinkers, such as kinesin-5 motors, which facilitate or restrict the outward sliding of antiparallel interpolar MTs (ipMTs); (iii) cortical pulling by disassembling astral MTs (aMTs) and/or dynein motors that pull aMTs outwards; (iv) ipMT plus end dynamics, notably net polymerization; and (v) ipMT minus end depolymerization manifest as poleward flux. The differential combination of these modules in different cell types produces diversity in the anaphase B mechanism. Combinations of antagonist modules can create a force balance that maintains the dynamic pre-anaphase B spindle at constant length. Tipping such a force balance at anaphase B onset can initiate and control the rate of spindle elongation. The activities of the basic motor filament components of the anaphase B machinery are controlled by a network of non-motor MT-associated proteins (MAPs), for example the key MT cross-linker, Ase1p/PRC1, and various cell-cycle kinases, phosphatases, and proteases. This review focuses on the molecular mechanisms of anaphase B spindle elongation in eukaryotic cells and briefly mentions bacterial DNA segregation systems that operate by spindle elongation

    Anaphase B spindle dynamics in Drosophila S2 cells: Comparison with embryo spindles

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>In the <it>Drosophila melanogaster </it>syncytial blastoderm stage embryo anaphase B is initiated by a cell cycle switch in which the suppression of microtubule minus end depolymerization and spatial reorganization of the plus ends of outwardly sliding interpolar microtubules triggers spindle elongation. RNA interference in <it>Drosophila </it>cultured S2 cells may present a useful tool for identifying novel components of this switch, but given the diversity of spindle design, it is important to first determine the extent of conservation of the mechanism of anaphase B in the two systems.</p> <p>Results</p> <p>The basic mechanism, involving an inverse correlation between poleward flux and spindle elongation is qualitatively similar in these systems, but quantitative differences exist. In S2 cells, poleward flux is only partially suppressed and the rate of anaphase B spindle elongation increases with the extent of suppression. Also, EB1-labelled microtubule plus ends redistribute away from the poles and towards the interpolar microtubule overlap zone, but this is less pronounced in S2 cells than in embryos. Finally, as in embryos, tubulin FRAP experiments revealed a reduction in the percentage recovery after photobleaching at regions proximal to the pole.</p> <p>Conclusions</p> <p>The basic features of the anaphase B switch, involving the suppression of poleward flux and reorganization of growing microtubule plus ends, is conserved in these systems. Thus S2 cells may be useful for rapidly identifying novel components of this switch. The quantitative differences likely reflect the adaptation of embryonic spindles for rapid, streamlined mitoses.</p

    Co-translational protein targeting facilitates centrosomal recruitment of PCNT during centrosome maturation in vertebrates.

    Get PDF
    As microtubule-organizing centers of animal cells, centrosomes guide the formation of the bipolar spindle that segregates chromosomes during mitosis. At mitosis onset, centrosomes maximize microtubule-organizing activity by rapidly expanding the pericentriolar material (PCM). This process is in part driven by the large PCM protein pericentrin (PCNT), as its level increases at the PCM and helps recruit additional PCM components. However, the mechanism underlying the timely centrosomal enrichment of PCNT remains unclear. Here, we show that PCNT is delivered co-translationally to centrosomes during early mitosis by cytoplasmic dynein, as evidenced by centrosomal enrichment of PCNT mRNA, its translation near centrosomes, and requirement of intact polysomes for PCNT mRNA localization. Additionally, the microtubule minus-end regulator, ASPM, is also targeted co-translationally to mitotic spindle poles. Together, these findings suggest that co-translational targeting of cytoplasmic proteins to specific subcellular destinations may be a generalized protein targeting mechanism

    Prometaphase spindle maintenance by an antagonistic motor-dependent force balance made robust by a disassembling lamin-B envelope

    Get PDF
    The lamin-B nuclear envelope stabilizes spindle microtubules by keeping the competitive motility of opposing-force kinesins in check

    Electrical conduction of silicon oxide containing silicon quantum dots

    Full text link
    Current-voltage measurements have been made at room temperature on a Si-rich silicon oxide film deposited via Electron-Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition (ECR-PECVD) and annealed at 750 - 1000 ^\circC. The thickness of oxide between Si quantum dots embedded in the film increases with the increase of annealing temperature. This leads to the decrease of current density as the annealing temperature is increased. Assuming the Fowler-Nordheim tunneling mechanism in large electric fields, we obtain an effective barrier height ϕeff\phi_{eff} of \sim 0.7 ±\pm 0.1 eV for an electron tunnelling through an oxide layer between Si quantum dots. The Frenkel-Poole effect can also be used to adequately explain the electrical conduction of the film under the influence of large electric fields. We suggest that at room temperature Si quantum dots can be regarded as traps that capture and emit electrons by means of tunneling.Comment: 14 pages, 5 figures, submitted to J. Phys. Conden. Mat

    Regulatory Characteristics of Bacillus pumilus Protease Promoters

    Get PDF
    © 2017, Springer Science+Business Media New York.Expression of extracellular protease genes of Bacilli is subject to regulation by many positive and negative regulators. Here we analyzed 5′ regulatory regions of genes encoding proteolytic proteases AprBp, GseBp, and MprBp from Bacillus pumilus strain 3–19. Gfp fusion constructs with upstream genomic regions of different lengths were created for all three genes to identify their natural promoters (regulatory regions). Our results suggest that the aprBp gene, encoding the major subtilisin-like protease, has the most extensive promoter region of approximately 445 bp, while the minor protease genes encoding glutamyl endopeptidase (gseBp) and metalloproteinase (mprBp) are preceded by promoters of 150 and 250 bp in length, respectively. Promoter analysis of PaprBp-gfpmu3 and PgseBp-gfpmu3 reporter fusion constructs in degU and spo0A mutants indicates a positive regulatory effect of DegU and Spo0A on protease expression, while the disruption of abrB, sinR, and scoC repressor genes did not significantly affect promoter activities of all protease genes. On the other hand, the expression of PaprBp-gfpmu3 and PgseBp-gfpmu3 reporters increased 1.6- and 3.0-fold, respectively, in sigD-deficient cells, indicating that the prevention of motility gene expression promotes protease expression. Our results indicate that all examined regulators regulated serine proteases production in B. subtilis

    From modules to networks: A systems-­level analysis of the bacitracin stress response in <i>Bacillus subtilis</i>

    Get PDF
    Bacterial resistance against antibiotics often involves multiple mechanisms that are interconnected to ensure robust protection. So far, the knowledge about underlying regulatory features of those resistance networks is sparse, since they can hardly be determined by experimentation alone. Here, we present the first computational approach to elucidate the interplay between multiple resistance modules against a single antibiotic and how regulatory network structure allows the cell to respond to and compensate for perturbations of resistance. Based on the response of Bacillus subtilis toward the cell wall synthesis-inhibiting antibiotic bacitracin, we developed a mathematical model that comprehensively describes the protective effect of two well-studied resistance modules (BceAB and BcrC) on the progression of the lipid II cycle. By integrating experimental measurements of expression levels, the model accurately predicts the efficacy of bacitracin against the B. subtilis wild type as well as mutant strains lacking one or both of the resistance modules. Our study reveals that bacitracin-induced changes in the properties of the lipid II cycle itself control the interplay between the two resistance modules. In particular, variations in the concentrations of UPP, the lipid II cycle intermediate that is targeted by bacitracin, connect the effect of the BceAB transporter and the homeostatic response via BcrC to an overall resistance response. We propose that monitoring changes in pathway properties caused by a stressor allows the cell to fine-tune deployment of multiple resistance systems and may serve as a cost-beneficial strategy to control the overall response toward this stressor

    Dynamic partitioning of mitotic kinesin-5 cross-linkers between microtubule-bound and freely diffusing states

    Get PDF
    The dynamic behavior of homotetrameric kinesin-5 during mitosis is poorly understood. Kinesin-5 may function only by binding, cross-linking, and sliding adjacent spindle microtubules (MTs), or, alternatively, it may bind to a stable “spindle matrix” to generate mitotic movements. We created transgenic Drosophila melanogaster expressing fluorescent kinesin-5, KLP61F-GFP, in a klp61f mutant background, where it rescues mitosis and viability. KLP61F-GFP localizes to interpolar MT bundles, half spindles, and asters, and is enriched around spindle poles. In fluorescence recovery after photobleaching experiments, KLP61F-GFP displays dynamic mobility similar to tubulin, which is inconsistent with a substantial static pool of kinesin-5. The data conform to a reaction–diffusion model in which most KLP61F is bound to spindle MTs, with the remainder diffusing freely. KLP61F appears to transiently bind MTs, moving short distances along them before detaching. Thus, kinesin-5 motors can function by cross-linking and sliding adjacent spindle MTs without the need for a static spindle matrix
    corecore