32,022 research outputs found
X-ray Emission from the 3C 273 Jet
We present results from four recent Chandra monitoring observations of the
jet in 3C 273 using the ACIS detector, obtained between November 2003 and July
2004. We find that the X-ray emission comes in two components: unresolved knots
that are smaller than the corresponding optically emitting knots and a broad
channel that is about the same width as the optical interknot region. We
compute the jet speed under the assumption that the X-ray emission is due to
inverse Compton scattering of the cosmic microwave background, finding that the
dimming of the jet X-ray emission to the jet termination relative to the radio
emission may be due to bulk deceleration.Comment: 2 pages, 2 figures, to appear in the proceedings of "The X-ray
Universe 2005", San Lorenzo de El Escorial (Spain), 26-30 September 200
Snowex 2017 Community Snow Depth Measurements: A Quality-Controlled, Georeferenced Product
Snow depth was one of the core ground measurements required to validate remotely-sensed data collected during SnowEx Year 1, which occurred in Colorado. The use of a single, common protocol was fundamental to produce a community reference dataset of high quality. Most of the nearly 100 Grand Mesa and Senator Beck Basin SnowEx ground crew participants contributed to this crucial dataset during 6-25 February 2017. Snow depths were measured along ~300 m transects, whose locations were determined according to a random-stratified approach using snowfall and tree-density gradients. Two-person teams used snowmobiles, skis, or snowshoes to travel to staked transect locations and to conduct measurements. Depths were measured with a 1-cm incremented probe every 3 meters along transects. In shallow areas of Grand Mesa, depth measurements were also collected with GPS snow-depth probes (a.k.a. MagnaProbes) at ~1-m intervals. During summer 2017, all reference stake positions were surveyed with <10 cm accuracy to improve overall snow depth location accuracy. During the campaign, 193 transects were measured over three weeks at Grand Mesa and 40 were collected over two weeks in Senator Beck Basin, representing more than 27,000 depth values. Each day of the campaign depth measurements were written in waterproof field books and photographed by National Snow and Ice Data Center (NSIDC) participants. The data were later transcribed and prepared for extensive quality assessment and control. Common issues such as protocol errors (e.g., survey in reverse direction), notebook image issues (e.g., halo in the center of digitized picture), and data-entry errors (sloppy writing and transcription errors) were identified and fixed on a point-by-point basis. In addition, we strove to produce a georeferenced product of fine quality, so we calculated and interpolated coordinates for every depth measurement based on surveyed stakes and the number of measurements made per transect. The product has been submitted to NSIDC in csv format. To educate data users, we present the study design and processing steps that have improved the quality and usability of this product. Also, we will address measurement and design uncertainties, which are different in open vs. forest areas
Polarization effects in millimeter wave propagation through rain: A review of present theory and a discussion of current experiments
An attempt was made to calculate the depolarization effects of rain on linearly or elliptically polarized millimeter waves. Results are given in graphs and tables
The design and construction of a towed multi-port water sampling probe for 100 meter depths
The experimental towed multi-port water sampler was designed to
provide a shipboard science party with the capability of obtaining continuous
water samples from the surface to a 100 meter depth. The device
will simultaneously provide six samples spaced one meter apart in a
vertical plane, while being towed by a surface support vessel at a forward
speed of between two to three knots.
The device consists of a bottom fish containing six electric
motors, each driving an individual pump. The six water samples are pumped
to the surface using separate runs of TFE Teflon tubing. The tube is
mounted in a pliant fairing that also houses the lifting cable, power
leads, and instrumentation bundle. A drum winch is used to store a total
of 150 meters of faired cable, and is capable of raising or lowering the
fish while under way.
The sampler will provide a discharge flow rate of 5.6 liters per
minute from each sample tube, while pumping through 150 meters of 12.7 rnrn
bore tubing, against a 4.5 meter head. A depth sensor transducer within
the fish provides a top-side readout of the actual operating depth of the
fish, while a remote reading temperature sensor provides a continuous
display of the water temperature.Prepared for the U.S. Department of Commerce,
National Oceanic and Atmospheric Administration
under Contract NA79AA-D-0044
The influence of polarization on millimeter wave propagation through rain
The measurement and analysis of the depolarization and attenuation that occur when millimeter wave radio signals propagate through rain are described. Progress was made in three major areas: the processing of recorded 1972 data, acquisition and processing of a large amount of 1973 data, and the development of a new theoretical model to predict rain cross polarization and attenuation. Each of these topics is described in detail along with radio frequency system design for cross polarization measurements
Patients as researchers - innovative experiences in UK National Health Service research
Consumer involvement is an established priority in UK health and social care service development and research. To date, little has been published describing the process of consumer involvement and assessing ‘consumers’ contributions to research. This paper provides a practical account of the effective incorporation of consumers into a research team, and outlines the extent to which they can enhance the research cycle; from project development and conduct, through data analysis and interpretation, to dissemination. Salient points are illustrated using the example of their collaboration in a research project. Of particular note were consumers’ contributions to the development of an ethically enhanced, more robust project design, and enriched data interpretation, which may not have resulted had consumers not been an integral part of the research team
Optical detection of the Pictor A jet and tidal tail : evidence against an IC/CMB jet
Date of Acceptance: 12/06/2015New images of the FR II radio galaxy Pictor A from the Hubble Space Telescope reveal a previously undiscovered tidal tail, as well as a number of jet knots coinciding with a known X-ray and radio jet. The tidal tail is approximately 5″ wide (3 kpc projected), starting 18″ (12 kpc) from the center of Pictor A, and extends more than 90″ (60 kpc). The knots are part of a jet observed to be about 4′ (160 kpc) long, extending to a bright hotspot. These images are the first optical detections of this jet, and by extracting knot flux densities through three filters, we set constraints on emission models. While the radio and optical flux densities are usually explained by synchrotron emission, there are several emission mechanisms that might be used to explain the X-ray flux densities. Our data rule out Doppler-boosted inverse Compton scattering as a source of the high-energy emission. Instead, we find that the observed emission can be well described by synchrotron emission from electrons with a low-energy index (p ∼ 2) that dominates the radio band, while a high-energy index (p ∼ 3) is needed for the X-ray band and the transition occurs in the optical/infrared band. This model is consistent with a continuous electron injection scenario.Peer reviewedFinal Accepted Versio
The X-ray Spectrum of the Rapid Burster using the Chandra HETGS
We present observations of the Rapid Burster (RB, also known as MXB 1730-335)
using the Chandra High Energy Transmission Grating Spectrometer. The average
interval between type II (accretion) bursts was about 40 s. There was one type
I (thermonuclear flash) burst and about 20 "mini-bursts" which are probably
type II bursts whose peak flux is 10-40% of the average peak flux of the other
type II bursts. The time averaged spectra of the type II bursts are well fit by
a blackbody with a temperature of kT = 1.6 keV, a radius of 8.9 km for a
distance of 8.6 kpc, and an interstellar column density of 1.7e22 per sq. cm.
No narrow emission or absorption lines were clearly detected. The 3 sigma upper
limits to the equivalent widths of any features are < 10 eV in the 1.1-7.0 keV
band and as small as 1.5 eV near 1.7 keV. We suggest that Comptonization
destroys absorption features such as the resonance line of Fe XXVI.Comment: 10 pages, 4 figures, accepted for publication in AJ (with minor
changes and enhanced discussion of the instrument configuration
- …