4,395 research outputs found
Interleavers
The chapter describes principles, analysis, design, properties, and implementations of optical frequency (or wavelength) interleavers. The emphasis is on finite impulse response devices based on cascaded Mach-Zehnder-type filter elements with carefully designed coupling ratios, the so-called resonant couplers. Another important class that is discussed is the infinite impulse response type, based on e.g. Fabry-Perot, Gires-Tournois, or ring resonators
Design of waveguides, bends and splitters in photonic crystal slabs with hexagonal holes in a triangular lattice
Waveguides in photonic crystal slabs (PCS) can be obtained by omitting a row of holes (W1-waveguides). In general the propagation properties in such waveguides suffer from the unavoidable periodic sidewall corrugation caused by the remaining parts of the crystal. The corrugation acts as a Bragg reflector, causing the occurrence of so-called mini stopbands in the transmission of the waveguide. The effect is quite strong in PCS with circular holes, but it can be significantly reduced if correctly oriented hexagonal holes are used. This so-called hexagon-type PCS allows the design of waveguides, bends and splitters having a relatively high group velocity and a wide transmission window in the PCS stopband for modes having their magnetic field oriented mainly perpendicular to the slab
A hysteresis model for an orthogonal thin-film magnetometer
The operation of a ferromagnetic thin-film magnetometer using the anisotropic magnetoresistance effect in a permalloy film is discussed. Measurements showed the presence of a hysteresis effect not predicted by available models. It is shown that the sensitivity of the magnetometer is predicted by applying F.S. Greene and R.B. Yarbrough's (1970) orthogonal susceptibility model, and that the hysteresis can be explained by assuming dispersion in the magnitude of anisotropy. The orthogonal susceptibility model must be evaluated numerically, accounting for a finite driving field. The effect of an inhomogeneous demagnetizing field in the film is discussed in relation to magnitude dispersion of the anisotrop
Focused Ion Beam Nano-structuring for Applications in Photonics
To date, nano- and micro-structuring has commonly been implemented by a combination of specifically optimized processes of electron-beam lithography and reactive ion etching, thus limiting the range of materials that can be structured to only a few. In this talk we will introduce focused ion beam (FIB) milling as an emerging technology that enables fast, reliable and well-controlled nanometer-size feature definition. Since the method involves physical removal of material by a beam of ions, the technique can be adapted and optimized almost for any material system. We will introduce the technique and discuss the basic application areas. In particular, we have investigated the impact of parameters such as ion beam current, dwell time, scanning strategy, and dielectric charging. We will discuss strategies to optimize the nano-structuring processes that are strongly dependent on the geometry of the desired structure. Finally, we will report our recent results on utilization and optimization of the focused ion beam technique for fabrication of nano-structures in integrated photonic devices on several material platforms such as Si, Al2O3, Y2O3, Sc2O3, and KY(WO4)2
Recherches sur les Rotifères des eaux saumâtres: IV. Rotifères planktoniques du port d'Ostende
- …