Orbital Deflection of Comets by Directed Energy

Cometary impacts pose a long-term hazard to life on Earth. Impact mitigation techniques have been studied extensively, but they tend to focus on asteroid diversion. Typical asteroid interdiction schemes involve spacecraft physically intercepting the target, a task feasible only for targets identified decades in advance and in a narrow range of orbits---criteria unlikely to be satisfied by a threatening comet. Comets, however, are naturally perturbed from purely gravitational trajectories through solar heating of their surfaces which activates sublimation-driven jets. Artificial heating of a comet, such as by a laser, may supplement natural heating by the Sun to purposefully manipulate its path and thereby avoid an impact. Deflection effectiveness depends on the comet's heating response, which varies dramatically depending on factors including nucleus size, orbit and dynamical history. These factors are incorporated into a numerical orbital model to assess the effectiveness and feasibility of using high-powered laser arrays in Earth orbit and on the ground for comet deflection. Simulation results suggest that a diffraction-limited 500 m orbital or terrestrial laser array operating at 10 GW for 1% of each day over 1 yr is sufficient to fully avert the impact of a typical 500 m diameter comet with primary nongravitational parameter A1 = 2 x 10^-8 au d^-2. Strategies to avoid comet fragmentation during deflection are also discussed.Comment: 13 pages, 12 figures; AJ, in pres

Global Distribution of Water Vapor and Cloud Cover--Sites for High Performance THz Applications

Absorption of terahertz radiation by atmospheric water vapor is a serious impediment for radio astronomy and for long-distance communications. Transmission in the THz regime is dependent almost exclusively on atmospheric precipitable water vapor (PWV). Though much of the Earth has PWV that is too high for good transmission above 200 GHz, there are a number of dry sites with very low attenuation. We performed a global analysis of PWV with high-resolution measurements from the Moderate Resolution Imaging Spectrometer (MODIS) on two NASA Earth Observing System (EOS) satellites over the year of 2011. We determined PWV and cloud cover distributions and then developed a model to find transmission and atmospheric radiance as well as necessary integration times in the various windows. We produced global maps over the common THz windows for astronomical and satellite communications scenarios. Notably, we show that up through 1 THz, systems could be built in excellent sites of Chile, Greenland and the Tibetan Plateau, while Antarctic performance is good to 1.6 THz. For a ground-to-space communication link up through 847 GHz, we found several sites in the Continental United States where mean atmospheric attenuation is less than 40 dB; not an insurmountable challenge for a link.Comment: 15 pages, 23 figure

Long-period comet impact risk mitigation with Earth-based laser arrays

Long-period comets (LPCs) frequently transit the inner solar system, and like near-Earth asteroids (NEAs), pose a continued risk of impact with Earth. Unlike NEAs, LPCs follow nearly parabolic trajectories and approach from the distant outer solar system where they cannot be observed. An LPC on an Earth-impact trajectory is unlikely to be discovered more than a few years in advance of its arrival, even with significant advancements in sky survey detection capabilities, likely leaving insufficient time to develop and deliver an interception mission to deflect the comet. However, recent proposals have called for the development of one or more large ∼ 1 km laser arrays placed on or near Earth primarily as a means for photon propulsion of low-mass spacecraft at delta-v above what would be feasible by traditional chemical or ion propulsion methods. Such a laser array can also be directed to target and heat a threatening comet, sublimating its ices and activating jets of dust and vapor which alter the comet's trajectory in a manner similar to rocket propulsion. Simulations of directed energy comet deflection were previously developed from astrometric models of nongravitational orbital perturbations from solar heating, an analogous process that has been observed in numerous comets. These simulations are used together with the distribution of known LPC trajectories to evaluate the effect of an operational Earth-based laser array on the LPC impact risk

Orbital Simulations on Deflecting Near-Earth Objects by Directed Energy

Laser ablation of a Near Earth Object (NEO) on a collision course with Earth produces a cloud of ejecta which exerts a thrust on the NEO, deflecting it from its original trajectory. Ablation may be performed from afar by illuminating an Earth-targeting asteroid or comet with a stand-off “DE-STAR” system consisting of a large phased-array laser in Earth orbit. Alternatively, a much smaller stand-on “DE-STARLITE” system may travel alongside the target, slowly deflecting it from nearby over a long period. This paper presents orbital simulations comparing the effectiveness of both systems across a range of laser and NEO parameters. Simulated parameters include magnitude, duration and, for the stand-on system, direction of the thrust, as well as the type, size and orbital characteristics of the target NEO. These simulations indicate that deflection distance is approximately proportional to the magnitude of thrust and to the square of the duration of ablation, and is inversely proportional to the mass. Furthermore, deflection distance shows strong dependence on thrust direction with the optimal direction of thrust varying with the duration of laser activity. As one example, consider a typical 325m asteroid: beginning 15 yr in advance, just 2N of thrust from a ∼ 20kW stand-on DE-STARLITE system is sufficient to deflect the asteroid by 2R⊕. Numerous scenarios are discussed as is a practical implementation of such a system consistent with current launch vehicle capabilities

Orbital simulations of laser-propelled spacecraft

Spacecraft accelerate by directing propellant in the opposite direction. In the traditional approach, the propellant is carried on board in the form of material fuel. This approach has the drawback of being limited in Delta v by the amount of fuel launched with the craft, a limit that does not scale well to high Delta v due to the massive nature of the fuel. Directed energy photon propulsion solves this problem by eliminating the need for on-board fuel storage. We discuss our system which uses a phased array of lasers to propel the spacecraft which contributes no mass to the spacecraft beyond that of the reflector, enabling a prolonged acceleration and much higher final speeds. This paper compares the effectiveness of such a system for propelling spacecraft into interplanetary and interstellar space across various laser and sail configurations. Simulated parameters include laser power, optics size and orbit as well as payload mass, reflector size and the trajectory of the spacecraft. As one example, a 70 GW laser with 10 km optics could propel a 1 kg craft past Neptune (~30 au) in 5 days at 4% the speed of light, or a 1 g “wafer-sat” past Mars (~0.5 au) in 20 minutes at 21% the speed of light. However, even lasers down to 2 kW power and 1 m optics show noticeable effect on gram-class payloads, boosting their altitude in low Earth orbits by several kilometers per day which is already sufficient to be of practical use

Orbital Deflection of Comets by Directed Energy

Cometary impacts pose a long-term hazard to life on Earth. Impact mitigation techniques have been studied extensively, but they tend to focus on asteroid diversion. Typical asteroid interdiction schemes involve spacecraft physically intercepting the target, a task feasible only for targets identified decades in advance and in a narrow range of orbits—criteria unlikely to be satisfied by a threatening comet. Comets, however, are naturally perturbed from purely gravitational trajectories via solar heating of their surfaces, which activates sublimation-driven jets. Artificial heating of a comet, such as by a laser, may supplement natural heating by the Sun to purposefully manipulate its path and thereby avoid an impact. Deflection effectiveness depends on the comet's heating response, which varies dramatically depending on factors including nucleus size, orbit, and dynamical history. These factors are incorporated into a numerical orbital model to assess the effectiveness and feasibility of using high-powered laser arrays in Earth orbit and on the ground for comet deflection. Simulation results suggest that a diffraction-limited 500 m orbital or terrestrial laser array operating at 10 GW for 1% of each day over 1 yr is sufficient to fully avert the impact of a typical 500 m diameter comet with primary nongravitational parameter A_1 = 2 × 10^(−8) au day^(−2). Strategies to avoid comet fragmentation during deflection are also discussed

Long-period comet impact risk mitigation with Earth-based laser arrays

Long-period comets (LPCs) frequently transit the inner solar system, and like near-Earth asteroids (NEAs), pose a continued risk of impact with Earth. Unlike NEAs, LPCs follow nearly parabolic trajectories and approach from the distant outer solar system where they cannot be observed. An LPC on an Earth-impact trajectory is unlikely to be discovered more than a few years in advance of its arrival, even with significant advancements in sky survey detection capabilities, likely leaving insufficient time to develop and deliver an interception mission to deflect the comet. However, recent proposals have called for the development of one or more large ∼ 1 km laser arrays placed on or near Earth primarily as a means for photon propulsion of low-mass spacecraft at delta-v above what would be feasible by traditional chemical or ion propulsion methods. Such a laser array can also be directed to target and heat a threatening comet, sublimating its ices and activating jets of dust and vapor which alter the comet's trajectory in a manner similar to rocket propulsion. Simulations of directed energy comet deflection were previously developed from astrometric models of nongravitational orbital perturbations from solar heating, an analogous process that has been observed in numerous comets. These simulations are used together with the distribution of known LPC trajectories to evaluate the effect of an operational Earth-based laser array on the LPC impact risk