6,656 research outputs found
The First Reported Infrared Emission from the SN 1006 Remnant
We report results of infrared imaging and spectroscopic observations of the
SN 1006 remnant, carried out with the Spitzer Space Telescope. The 24 micron
image from MIPS clearly shows faint filamentary emission along the northwest
rim of the remnant shell, nearly coincident with the Balmer filaments that
delineate the present position of the expanding shock. The 24 micron emission
traces the Balmer filaments almost perfectly, but lies a few arcsec within,
indicating an origin in interstellar dust heated by the shock. Subsequent
decline in the IR behind the shock is presumably due largely to grain
destruction through sputtering. The emission drops far more rapidly than
current models predict, however, even for a higher proportion of small grains
than would be found closer to the Galactic plane. The rapid drop may result in
part from a grain density that has always been lower -- a relic effect from an
earlier epoch when the shock was encountering a lower density -- but higher
grain destruction rates still seem to be required. Spectra from three positions
along the NW filament from the IRS instrument all show only a featureless
continuum, consistent with thermal emission from warm dust. The dust-to-gas
mass ratio in the pre-shock interstellar medium is lower than that expected for
the Galactic ISM -- as has also been observed in the analysis of IR emission
from other SNRs but whose cause remains unclear. As with other SN Ia remnants,
SN 1006 shows no evidence for dust grain formation in the supernova ejecta.Comment: 24 pages, 6 figure
Improved grazing management practices in the catchments of the Great Barrier Reef, Australia: Does climate variability influence their adoption by landholders?
The declining health of the Great Barrier Reef from diffuse source pollutants has resulted in substantial policy attention on increasing the adoption of improved management practices by agricultural producers. Although economic modelling indicates that many improved management practices are financially rewarding, landholders with dated management practices remain hesitant to change. This research involved bio-economic modelling to understand the variance in private returns for grazing enterprises across a climate cycle. Results show that financial returns to landholders can vary substantially across different 20-year periods of a climate cycle, demonstrating that the variability in expected returns may be an important reason why landholders are cautious about changing their management practices. Although previous research has separately identified financial returns and attitudes to risk and uncertainty of landholders as key influences on decisions concerning adoption of improved management practices, this research demonstrates that it is the interaction between these factors that is important to understand when designing policy settings. © Australian Rangeland Society
The Distance to the Cygnus Loop from Hubble Space Telescope Imaging of the Primary Shock Front
We present a Hubble Space Telescope/WFPC2 narrow-band H-alpha image of a
region on the northeastern limb of the Cygnus Loop supernova remnant. This
location provides a detailed example of where the primary blast wave first
encounters the surrounding interstellar medium. The filament structure is seen
in exquisite detail in this image, which was obtained primarily as an EARLY
ACQuisition image for a follow-up spectroscopic program. We compare the HST
image to a digitized version of the POSS-I red plate to measure the proper
motion of this filament. By combining this value for the proper motion with
previous measurements of the shock velocity at this position we find that the
distance to the Cygnus Loop is 440 (+130, -100) pc, considerably smaller than
the canonical value of 770 pc. We briefly discuss the ramifications of this new
distance estimate for our understanding of this prototypical supernova remnant.Comment: 18 pages, 3 Figures (2 JPEG and one Postscript
Ferritic nitrocarburising of tool steels
Four different tool steel materials, P20, H13, M2 and D2, were nitrocarburised at 570°C in a fluidised bed furnace. The reactive diffusion of nitrogen and carbon into the various substrate microstructures is compared and related to the different alloy carbide distributions. The effect of carbon bearing gas (carbon dioxide, natural gas) on carbon absorption is reported, as well as its influence on compound layer growth and porosity. Partial reduction of Fe3O4 at the surface resulted in the formation of a complex, epsi-nitride containing oxide layer. In H13, carbon was deeply absorbed throughout the entire diffusion zone, affecting the growth of grain boundary cementite, nitrogen diffusivity and the sharpness of the compound layer: diffusion zone interface. When natural gas was used, carbon became highly concentrated in the compound layer, while surface decarburisation occurred with carbon dioxide. These microstructural effects are discussed in relation to hardness profiles, and compound layer hardness and ductility. The surfaces were characterised using glow discharge optical emission spectroscopy, optical and scanning electron microscopy and X-ray diffraction.<br /
Pin on disc wear investigation of nitrocarburised H13 tool steel
Nitrocarburised H13 disks were tested in dry, sliding wear against a stationary ruby ball (pin). Three different 4 h nitrocarburising treatments were compared, using N2/NH3/CO2, N2/NH3/natural gas and N2/NH3 gas mixtures, resulting in compound layers of varying thickness, hardness, porosity and oxide morphology. During mild, oxidative wear, with the formation of abrasive wear debris, the most brittle and oxidised surfaces performed poorly. Polishing to a bright, reflective finish greatly reduced wear. However, the N2/NH3/CO2 sample also frequently maintained a \u27very mild\u27 wear regime, owing to the formation of a protective film between the wear surfaces, and resulting in a lowering of the friction coefficient. This treated surface was porous and covered in a complex layer of coarse oxide+epsi-carbonitride. Nitrocarburised samples and wear tracks were characterised by optical microscopy, SEM, atomic force microscopy and stylus profilometry.<br /
Differential Role of “Signal 3” Inflammatory Cytokines in Regulating CD8 T Cell Expansion and Differentiation in vivo
Following an infection, naïve CD8 T cells are stimulated by dendritic cells (DC) displaying pathogen-derived peptides on MHC class I molecules (signal 1) and costimulatory molecules (signal 2). Additionally, pathogen-induced inflammatory cytokines also act directly on the responding CD8 T cells to regulate their expansion and differentiation. In particular, both type I interferons (IFNs) and IL-12 have been described as critical survival signals (signal 3) for optimal CD8 T cell accumulation during the expansion phase. Furthermore, expansion in numbers of antigen-specific CD8 T cells is coupled with their acquisition of effector functions to combat the infection. However, it still remains unclear whether these same cytokines also regulate the effector/memory differentiation program of the CD8 T cell response in vivo. Here, we demonstrate that defective signaling by either type I IFNs or IL-12 to the responding CD8 T cells impairs maximal expansion in response to DC immunization + CpG ODN, but neither of these cytokines is essential to regulate the effector/memory differentiation program. In addition, lack of direct IL-12 signaling to CD8 T cells accelerates the development of central memory phenotype in both primary and secondary antigen-specific memory CD8 T cells
- …