2,309 research outputs found
Prediction Weighted Maximum Frequency Selection
Shrinkage estimators that possess the ability to produce sparse solutions
have become increasingly important to the analysis of today's complex datasets.
Examples include the LASSO, the Elastic-Net and their adaptive counterparts.
Estimation of penalty parameters still presents difficulties however. While
variable selection consistent procedures have been developed, their finite
sample performance can often be less than satisfactory. We develop a new
strategy for variable selection using the adaptive LASSO and adaptive
Elastic-Net estimators with diverging. The basic idea first involves
using the trace paths of their LARS solutions to bootstrap estimates of maximum
frequency (MF) models conditioned on dimension. Conditioning on dimension
effectively mitigates overfitting, however to deal with underfitting, these MFs
are then prediction-weighted, and it is shown that not only can consistent
model selection be achieved, but that attractive convergence rates can as well,
leading to excellent finite sample performance. Detailed numerical studies are
carried out on both simulated and real datasets. Extensions to the class of
generalized linear models are also detailed.Comment: This manuscript contains 41 pages and 14 figure
Rolling bearing fault detection based on local characteristic-scale decomposition and teager energy operator
In this paper, a rolling bearing fault detection method based on Local Characteristic-scale Decomposition (LCD) and Teager Energy operator (TEO) is proposed. Vibration signals is related to the bearing fault. However, the vibration signal of rolling bearing is nonlinear and has multiple components, which makes it difficult to analyze the signals by using traditional method such as the fast Fourier transform (FFT). LCD, a recently developed signal decomposition method, is especially capable for dealing with the complex signal by decomposing it into several intrinsic scale components (ISC). Furthermore, to extract fault diagnosis of the components, we used TEO to demodulate each ISC. The energy of fault feature frequencies was extracted as fault vector. The result shows that the method successfully diagnoses bearing fault
Centrifugal pump fault detection based on SWT and SVM
Centrifugal pumps, like other rotating equipment, produce vibration signals during operation. Vibration signals often contain pump state information. Therefore, we can obtain pump state information by using appropriate signal processing methods. Synchrosqueezing wavelet transform (SWT) is a new time-frequency analysis technology. It is an algorithm for rebuilding time-frequency signals, which is similar to the empirical mode decomposition method. It can improve the time-frequency resolution of the signal compared with wavelet transform. In this paper, the SWT is used to analyze the vibration signal of centrifugal pump and extract characteristics. The data shows that the SWT can effectively extract the information of signal in time domain and frequency domain. Then we use the Support Vector Machine (SVM) to classify the features and realize the fault diagnosis of centrifugal pump. The result proves that the fault diagnosis method based on the SWT and SVM
Intense Pulsed Light Therapy
Intense pulsed light (IPL) is one of the most effective nonablative approaches to treat skin photoaging. The broad range of wavelengths (500–1200 nm) emitted from IPL devices effectively target both melanin and hemoglobin in the skin. Numerous trials show the effectiveness and compatibility of IPL devices in a variety of skin conditions, especially in cosmetic indications such as hypertrichosis and telangiectasias. Compared with the wide clinical use of IPL, the biochemical and molecular mechanism is not clear. Both in vivo and in vitro studies demonstrate that IPL could increase the production of extracellular matrix, promote the proliferation of fibroblasts, and increase the secretion of TGF-β and matrix metalloproteinases, which play important roles in the photorejuvenation effects of IPL. However, investigations regarding the detailed underlying mechanism are necessary
Rolling Bearing Fault Detection Based on the Teager Energy Operator and Elman Neural Network
This paper presents an approach to bearing fault diagnosis based on the Teager energy operator (TEO) and Elman neural network. The TEO can estimate the total mechanical energy required to generate signals, thereby resulting in good time resolution and self-adaptability to transient signals. These attributes reflect the advantage of detecting signal impact characteristics. To detect the impact characteristics of the vibration signals of bearing faults, we used the TEO to extract the cyclical impact caused by bearing failure and applied the wavelet packet to reduce the noise of the Teager energy signal. This approach also enabled the extraction of bearing fault feature frequencies, which were identified using the fast Fourier transform of Teager energy. The feature frequencies of the inner and outer faults, as well as the ratio of resonance frequency band energy to total energy in the Teager spectrum, were extracted as feature vectors. In order to avoid a frequency leak error, the weighted Teager spectrum around the fault frequency was extracted as feature vector. These vectors were then used to train the Elman neural network and improve the robustness of the diagnostic algorithm. Experimental results indicate that the proposed approach effectively detects bearing faults under variable conditions
Online milling tool condition monitoring with a single continuous hidden Markov models approach
The health status evolving from normal to broken condition of a milling tool is needed as an object of assessment in condition-based maintenance. This paper proposes continuous hidden Markov models (CHMM) to assess the status of the tool online based on the normal dataset in the same case. A wavelet-packet decomposition technology is used to feature extraction and the CHMM is trained by Baum-Welch algorithm. Finally, we compute the log-likelihood based on the trained CHMM for abnormal detection and health assessment in real time during the milling process. A case study on tool state estimation demonstrates the effectiveness and potential of this methodology
Fault diagnosis of electro-mechanical actuator based on WPD-STFT time-frequency entropy and PNN
Electro-mechanical actuators (EMAs) are increasingly being used as critical actuation devices of the aircraft. It will cause serious accidents once the fault of EMAs occurs, thus the fault diagnosis of EMAs is essential to maintain the normal operation of aircraft. In this paper, a method based on WPD-STFT time-frequency entropy and PNN is proposed to achieve fault diagnosis of EMAs by processing the vibration signals collected by the accelerometer installed in the EMAs. Firstly, the vibration signals are decomposed by wavelet packet to obtain the signal components of different frequency bands, the signal components are subjected to STFT and spectrograms are obtained. Then, time-frequency entropy is calculated and combined with principal component analysis (PCA) for dimension reduction as the feature vector. Finally, the probabilistic neural network (PNN) classifier is introduced to classify the fault modes. The experimental result shows that this method can accomplish the accurate fault diagnosis of EMAs. Moreover, the performance of the proposed WPD-STFT time-frequency entropy method has an advantage over that of WPD-PCA method or STFT combined with mass-moment entropy method for feature extraction
Application of EMD-AR and MTS for hydraulic pump fault diagnosis
A real-time diagnosis of hydraulic pumps is very crucial for the reliable operation of hydraulic systems. The main purpose of this study is to propose a fault diagnosis approach for hydraulic systems based on the empirical mode decomposition (EMD), autoregressive (AR) model, singular value decomposition (SVD), and Mahalanobis–Taguchi system (MTS). The AR model effectively extracts the fault feature of vibration signals. However, it can only be applied to stationary signals; the fault vibration signals of hydraulic pumps are non-stationary. To address this problem, the EMD method is used as a pretreatment step to decompose the non-stationary vibration signals of hydraulic pumps. First, the vibration signals of hydraulic pumps are decomposed into a finite number of stationary intrinsic mode functions (IMF). The AR model of each IMF component is established. The AR parameters and the remnant’s variance are regarded as the initial feature vector matrices. Third, the singular values are obtained by applying the SVD to the initial feature vector matrices. Finally, these values serve as the fault feature vectors to be entered to the MTS, thereby classifying the fault pattern of the hydraulic pumps. The Taguchi methods are employed to reduce the redundant features and extract the principal components. Experimental analysis results indicate that this method can effectively accomplish the fault diagnosis of hydraulic pumps
Optimizing knowledge reuse within firms: frameworks, strategies and emerging tools
Ph.DDOCTOR OF PHILOSOPH
- …