11,667 research outputs found
Joining Metallurgically Incompatible Metals
A method for joining a second alloy material to a first alloy material where the two alloy materials are incompatible, comprising forming three successive interface layers over a substrate comprising the first alloy material, followed by forming a structure of the second alloy material over the interface layers, wherein the composition and deposition method for each of the layers is selected so that brittle intermetallics are not formed between elements of the adjacent layer compositions
Numerical Investigation of Thermo-Mechanical Field during Selective Laser Melting Process with Experimental Validation
In this study, thermo-mechanical simulation was conducted to predict thermal and stress behavior in Selective Laser Melting (SLM). Temperature-dependent material properties for processed material 304L stainless steel were incorporated into the model in order to capture the change from powder to fully dense solid stainless steel. Temperature and thermal stress history were tracked under conditions of different parameter sets which were designed to reduce defect formation. The thermal model predicted the temperature history for multi-track scans under different process parameters, such as laser power, effective scanning speed and hatch spacing. Subsequently, the corresponding melt-pool size, solidification rate and temperature gradients could be calculated from simulated temperature data. These three parameters from the simulation were compared with experimental melt pool size, grain structure and cell spacing data obtained from a Renishaw AM250. The experimental data were also used to determine unknown simulation parameters required by the continuum model, e.g., the optical penetration depth and thermal conductivity multiplier for the molten region. This allowed the simulation model to accurately predict melt pool size and solidification structure of SLM 304L stainless steel. Simulated stress showed that the subsequent thermal cyclic melting in successive scanned tracks resulted in alternating compressive and tensile thermal stresses. This work will provide insight for studying microstructure morphology, residual stress and deformations in the SLM process of 304L stainless steel
Detecting Photon-Photon Interactions in a Superconducting Circuit
A local interaction between photons can be engineered by coupling a nonlinear
system to a transmission line. The required high impedance transmission line
can be conveniently formed from a chain of Josephson junctions. The
nonlinearity is generated by side-coupling this chain to a Cooper pair box. We
propose to probe the resulting photon-photon interactions via their effect on
the current-voltage characteristic of a voltage-biased Josephson junction
connected to the transmission line. Considering the Cooper pair box to be in
the weakly anharmonic regime, we find that the dc current through the probe
junction yields features around the voltages , where
is the plasma frequency of the superconducting circuit. The features
at are a direct signature of the photon-photon interaction in the
system.Comment: 10 pages, 7 figure
Experimental and Numerical Investigation in Directed Energy Deposition for Component Repair
Directed energy deposition (DED) has been widely used for component repair. In the repair process, the surface defects are machined to a groove or slot and then refilled. The sidewall inclination angle of the groove geometry has been recognized to have a considerable impact on the mechanical properties of repaired parts. The objective of this work was to investigate the feasibility of repairing various V-shaped defects with both experiments and modeling. At first, the repair volume was defined by scanning the defective zone. Then, the repair volume was sliced to generate the repair toolpath. After that, the DED process was used to deposit Ti6Al4V powder on the damaged plates with two different slot geometries. Mechanical properties of the repaired parts were evaluated by microstructure analysis and tensile test. Testing of the repaired parts showed excellent bonding between the deposits and base materials with the triangular slot repair. 3D finite element analysis (FEA) models based on sequentially coupled thermo-mechanical field analysis were developed to simulate the corresponding repair process. Thermal histories of the substrate on the repair sample were measured to calibrate the 3D coupled thermo-mechanical model. The temperature measurements showed very good verification with the predicted temperature results. After that, the validated model was used to predict the residual stresses and distortions in the parts. Predicted deformation and stress results can guide the evaluation of the repair quality
Reconstructing a Z' Lagrangian using the LHC and low-energy data
We study the potential of the LHC and future low-energy experiments to
precisely measure the underlying model parameters of a new Z' boson. We
emphasize the complimentary information obtained from both on- and off-peak LHC
dilepton data, from the future Q-weak measurement of the weak charge of the
proton, and from a proposed measurement of parity violation in low-energy
Moller scattering. We demonstrate the importance of off-peak LHC data and
Q-weak for removing sign degeneracies between Z' couplings that occur if only
on-peak LHC data is studied. A future precision measurement of low-energy
Moller scattering can resolve a scaling degeneracy between quark and lepton
couplings that remains after analyzing LHC dilepton data, permitting an
extraction of the individual Z' couplings rather than combinations of them. We
study how precisely Z' properties can be extracted for LHC integrated
luminosities ranging from a few inverse femtobarns to super-LHC values of an
inverse attobarn. For the several example cases studied with M_Z'=1.5 TeV, we
find that coupling combinations can be determined with relative uncertainties
reaching 30% with 30 fb^-1 of integrated luminosity, while 50% is possible with
10 fb^-1. With SLHC luminosities of 1 ab^-1, we find that products of quark and
lepton couplings can be probed to 10%.Comment: 36 pages, 17 figure
Time and Space Bounds for Reversible Simulation
We prove a general upper bound on the tradeoff between time and space that
suffices for the reversible simulation of irreversible computation. Previously,
only simulations using exponential time or quadratic space were known.
The tradeoff shows for the first time that we can simultaneously achieve
subexponential time and subquadratic space.
The boundary values are the exponential time with hardly any extra space
required by the Lange-McKenzie-Tapp method and the ()th power time with
square space required by the Bennett method. We also give the first general
lower bound on the extra storage space required by general reversible
simulation. This lower bound is optimal in that it is achieved by some
reversible simulations.Comment: 11 pages LaTeX, Proc ICALP 2001, Lecture Notes in Computer Science,
Vol xxx Springer-Verlag, Berlin, 200
Macro-/Micro-Controlled 3D Lithium-Ion Batteries Via Additive Manufacturing and Electric Field Processing
This paper presents a new concept for making battery electrodes that can simultaneously control macro-/micro-structures and help address current energy storage technology gaps and future energy storage requirements. Modern batteries are fabricated in the form of laminated structures that are composed of randomly mixed constituent materials. This randomness in conventional methods can provide a possibility of developing new breakthrough processing techniques to build well-organized structures that can improve battery performance. In the proposed processing, an electric field (EF) controls the microstructures of manganese-based electrodes, while additive manufacturing controls macro-3D structures and the integration of both scales. The synergistic control of micro-/macro-structures is a novel concept in energy material processing that has considerable potential for providing unprecedented control of electrode structures, thereby enhancing performance. Electrochemical tests have shown that these new electrodes exhibit superior performance in their specific capacity, areal capacity, and life cycle
A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, and Material Testing for Component Remanufacturing
Metallic components can gain defects such as dents, cracks, wear, heat checks, deformation, etc., that need to be repaired before reinserting into service for extending the lifespan of these parts. In this study, a hybrid process was developed to integrate reverse engineering, pre-repair processing, additive manufacturing, and material testing for the purpose of part remanufacturing. Worn components with varied defects were scanned using a 3D scanner to recreate the three-dimensional models. Pre-repair processing methods which include pre-repair machining and heat-treatment were introduced. Strategies for pre-repair machining of defects including surface impact damage, surface superficial damage and cracking were presented. Pre-repair heat-treatment procedure for H13 tool steel which was widely used in die/mold application was introduced. Repair volume reconstruction methodology was developed to regain the missing geometry on worn parts. The repair volume provides a geometry that should be restored in the additive manufacturing process. A damaged component was repaired using the directed energy deposition process to rebuild the worn geometry. The repaired part was inspected in microstructure and mechanical aspects to evaluate the repair. The hybrid process solved key issues associated with repair, providing a solution for automated metallic component remanufacturing
- …